A fast evolutionary pursuit algorithm based on linearly combining vectors

In this paper, we propose a fast Evolutionary pursuit algorithm. It searches for optimal discriminant vectors through linearly combining standard bases. Experiments on the Yale and ORL databases verify its effectiveness and enhanced efficiency.     

光纤光栅视觉系统

利用光学衍射原理，研制成了光纤光栅衍射屏，并与计算机神经网络相结合，开发了了一种识别立体形状的视觉系统。本文介绍了光纤光栅的设计原理及计算方法，给出了系统的总体结构及工作原理，完成了三棱 柱，三棱锥、四棱柱，四棱锥和球等立体形状学习与识别，并讨论了实验结果。     

Transport properties in a mixed inorganic ion exchanger—zirconium phosphomolybdate—in comparison to its single salt counterparts

Amorphous inorganic ion exchangers zirconium phosphate, zirconium molybdate and zirconium phosphomolybdate have been prepared and characterized by elemental analysis, TGA, FTIR and surface area measurements. The protonic conductivity in these materials were determined at various temperatures and compared. It was found that the mixed material zirconium phosphomolybdate showed maximum conductivity at all temperatures.     

化学模式识别法在钢铁工业中的若干应用

本文涉及一种崭新的非函数数据处理法及其在工业诊断和优化中的应用。并对其进行要因分析和优化决策的原理作了介绍。结合钢铁工业生产中的实例进行了分析。还探讨了该方法在钢铁工业中应用的意义。     

Tuning of electronic states in self-assembled InAs quantum dots using an ion implantation technique

We report the tunability of up to 150 meV of the ground state transition of self-assembled InAs quantum dots (QDs) using Mn ion implantation and subsequent annealing. Because of the exciton localization in the quantum dots, the photoluminescence efficiency (T=12K) of the quantum dot transition remains at 80% of its original value after implantation with a Mn dose of 1×10¹³ cm⁻²ions. Strong luminescence still remains at room temperature. At a high implantation dose (1×10¹⁵ cm⁻²) and rapid thermal annealing (700°C for 60s) about 25% of the QD luminescence intensity is recovered at T=12K.     

An expert PID controller uses refined ziegler and nichols rules and fuzzy logic ideas

This article proposes a scheme for the on-line adjustment of three mode controller settings based on experimental measurements of closed-loop performance. It uses a recently developed heuristic tuning procedure to identify estimated process parameters. This method may give rise to conflicting estimates. Fuzzy Set theory is applied to manage the situation in terms of a fuzzy conjunction to combine the various estimates. PID control was chosen because of its wide use in the industrial environment due to driving simplicity and robustness. The article shows design, development, and computer simulation aspects.     

无端点检测汉语识别算法的实现及改进——动态时间规整和隐马尔可夫统一模型的应用

语音识别算法中，动态时间规整（ＤＴＷ）和隐马尔可夫模型（ＨＭＭ）是最有效的识别算法，并且两者之间有着本质的联系和内在的统一［１］，据此前期工作中，已经建立了ＤＴＷ和ＨＭＭ的统一模型（ＤＨＵＭ）［２、３］。本文对ＤＨＵＭ进行了改进，在ＤＨＵＭ中引进寂静段自环，并根据汉语语音的特点，提出了一种无端点检测的语音识别算法。在识别过程中，该算法无需确定语音信号起止点位置，而是从寂静段开始，直接按帧提取特征（帧长２０ｍｓ，帧间重叠５０％），特征向量由１５阶倒谱系数和帧平均能量组成。实验中，用ＤＨＵＭ实现了该算法，对９９个相似汉语单字的识别测试结果表明：无端点检测的识别正识率为９４．９５％，正识率下降很少，但不作端点检测却降低了算法的复杂程度。为进一步改善识别性能，特征向量采用一种听觉模型特征，识别器具有更好的鲁棒性，识别率会略有提高。     

手写体汉字识别问题综论

本文在讨论了人对汉字的认知心理试验研究结果之后,认为人类的汉字识别是经由整字属性及分层结构的多种途径复合而成的。这些途径中的大多数都可以在手写体汉字的机器识别中模仿运用。由此可把汉字的机器识别方法归纳为整模式法和子模式法两个大类,对它们的有利方面和困难方面进行了讨论;对影响其性能的因素进行了分析;对识别率以及它与识别字集大小和后处理等的关系提出了评估的问题。     

丙烯酸接枝聚丙烯纤维的结构与性能

本文研究了用化学引发剂引发丙烯酸接枝聚丙烯纤维的某些影响因素。红外光谱分析表明，丙烯酸接枝在聚丙烯大分子链的叔碳原子上。Ｘ－射线衍射和ＤＳＣ分析指出，纤维接枝后结晶度有所增加，接枝前纤维存在的β－变体转化成了α－变体，接枝纤维的吸湿性、离子交换容量和染色性随接枝率增加而增大。接枝纤维的力学性能有所下降。     

The multi-structure of oxidized-reduced tungsten carbide surface(s)

The XPS of bulk tungsten carbide, partially oxidized WC surfaces at 373 and 573 K as well as tungsten trioxide have been reported. Bulk WC has been prepared from WO₃ as a starting material in a mixture of CH₄ (20%) and H₂ (80%) at 1150 K for 4 h, while partially oxidized WC surfaces were prepared by oxygen chemisorption on a clean WC surface at 200 K, then the temperatures were raised to 373 and 573 K respectively. The XPS of a freshly prepared WC reveals the presence of a small amount of WO₃ on the surface and a slightly higher concentration in the bulk. The oxygen-exposed fresh WC surfaces and surfaces treated at temperatures higher than 373 K show the presence of WO₃ in a considerable quantity depending on the length and the treatment temperature. Ar⁺ bombardment of this partially oxidized surface reduces WO₃ to WO₂ and W(0), while WC is partially reduced to W(0). Isomerization reactions of alkanes on oxygen-exposed WC surface occurs in reality on a composite surface structure containing WC, WO₃, WO₂ and elemental W(0).