高速电喷镀制备纳米PTFE镍基复合镀层

研究了以Q235和65Mn钢为基底,经高速电喷镀形成的纳米PTFE镍基复合镀层,考察了喷射速度对镀层沉积速率、表面显微硬度、结晶组织形貌以及镀层结合力的影响,探讨了喷射速度影响镀层性能组织的原因机理。结果表明,喷射速度在4.2～6.3m/s时获得的镀层有较高的沉积速率和表面硬度,晶粒细小、组织致密,镀层结合力较高。     

磨料射流技术用于石油管道表面预处理

从工作原理、工艺流程、技术参数、装置组成等方面 介绍已应用于胜利油田生产的磨料射流油管表面预处理生产线,应用证明：它具有处理质量好、速度快、无污染、操作简便等优点,是进行油管表面预处理的全新工艺.     

水布垭电站水轮机导叶端面密封的改进

介绍了水布垭电站水轮机导叶端面密封的运行情况,针对其密封材料易空蚀磨损、检修困难等缺陷,提出了解决缺陷的方法。改进后的机组运行稳定,密封效果良好。     

跌坎型底流消能工的跌坎最小深度研究

跌坎型底流消能工消力池内的水力特性受到跌坎深度的影响。应用平面紊动射流理论,以消力池内允许的最大时均动水压强为控制目标,对于跌坎最小深度的确定方法进行了初步分析,建立了计算跌坎最小深度值的理论公式。通过水力学试验方法,得到消力池底板时均动水压强与跌坎最小深度之间的关系,同时与跌坎最小深度试验值进行了比对,对本文建立的理论公式进行了验证。     

热镀锌钢板表面锌波纹影响因素的数值分析

针对热镀锌钢板表面出现的锌波纹问题,通过带钢表面锌液流动的一维简化模型预测锌层稳态厚度;采用摄动法并结合三维气刀射流湍流流场的大涡模拟,提出热镀锌钢板表面锌波纹的数值预测模型;研究工艺参数对锌波纹的影响规律.结果表明：气刀距带钢的距离越远,刀唇间隙越大,气刀入口压强越小,带钢表面锌波纹越明显;气刀入口湍流强度对锌波纹影响可以忽略.     

Ski jump trajectory with consideration of air resistance

In the case of the ski-jump type energy dissipation,the jet trajectory will be greatly affected by the air entrainment and the air resistance.It is necessary to consider those factors when estimating the trajectory of the jet flow.In this work,the effect of the air resistance on the jet trajectory is theoretically and experimentally investigated.A comprehensive resistance coefficient is proposed.To determine this coefficient,experiments of five models are conducted with the circular-shaped flip bucket placed at the point of the takeoff of ski jumps.It is shown that,this coefficient of the lower jet trajectory is only related to the approach flow Froude number,while that of the upper jet trajectory is dominated by both this Froude number and the deflection angle.Furthermore,the present methodology is validated by experimental data in this work and the maximum errors are not larger than 3.2%and 8.6%for the lower and upper jet trajectories,respectively.     

NUMERICAL STUDY OF HYDRODYNAMICS OF MULTIPLE TANDEM JETS IN CROSS FLOW

The hydrodynamics of a single jet and four tandem jets in a cross flow are simulated by using the Computational Fluid Dynamics (CFD) software Fluent. The realizable model is used to close the Reynolds-Averaged equations. The flow characteristics of the jets, including the jet trajectory, the velocity field and the turbulent kinetic energy are obtained with various jet-to-cross flow velocity ratios in the range of 2.38-17.88. It is shown that a single jet penetrates slightly deeper than the first jet in a jet group at the same , although the difference decreases with the decrease of . It is also found that the way in which the velo-city decays along the centerline of the jet is similar for both a single jet and the first jet in a group, and the speed of the decay increases with the decrease of . The downstream jets in a group are found to behave differently due to the sheltering effect of the first jet in the group. Compared with the first jet, the downstream jets penetrate deeper into the cross flow, and the velocity decays more slowly. The circulation zone between the two upstream jets in the front is stronger than those formed between the downstream jets. The Turbulent Kinetic Energy (TKE) sees a distinct double-peak across the cross-sections close to each nozzle, with low values in the jet core and high values in the shear layers. The double-peak gradually vanishes, as the shear layers of the jet merge further away from the nozzle, where the TKE assumes peaks at the jet centerline.     

DRILLING CHARACTERISTICS OF COMBINATIONS OF DIFFERENT HIGH PRESSURE JET NOZZLES

The high speed fluid jet for directly or indirectly breaking rock is one of the most effective ways to improve the deep penetration rate.In order to maximize the efficiency of energy use,the flow characteristics of different combinations of high pressure jet nozzles are analyzed through numerical simulations.According to the velocity vectors at the bottom and the bottom hole pressure diagram,the effects of the high pressure nozzle combinations on the flow structure and the penetration rate are analyzed.It is shown that the combination of three vertical edge nozzles is very efficient,but inefficient in cleaning the bottom hole and eroding the wall.The jet velocity is 400 m/s and the radius is 5 mm,with a center nozzle added,the problem can be solved,but the high-pressure fluid displacement would increase.The center nozzle’s jet velocity is 200 m/s and the radius is 8 mm,the combination of two vertical edge nozzles and a center tilt nozzle or that of a vertical edge nozzle and a center tilt nozzle would provide a flow structure favorable for drilling.The angle of inclination is 10o.To take advantage of high pressure jet energy to improve the efficiency of drilling,it is important to select a suitable nozzle combination according real conditions.     

新立城水库坝基防渗高压摆喷灌浆参数试验

新立城水库土坝坝基属于双层地基,即表层为粘性土层,下面为沙砾石层。坝基下砾质粗砂和细砾为强透水层,连续分布。因需要防渗的透水层不厚(仅2～5m),采用高压喷射灌浆封堵透水层。施工前选定与坝段同样地质条件的试验场,用实际施工的喷灌设备分不同方案进行原型试验,开挖后观察成墙效果,最后确定施工技术参数。     

小型水电站水轮机导叶关闭规律的优化——以猴场水电站为例

以猴场水电站为例,探讨了小型水电站水轮机导叶关闭规律的优化。在水轮机组的GD2值因制造难度等原因不能加大时,采用导叶关闭的方法,通过优化导叶关闭规律,以满足水电站水力过渡过程计算的要求,从而可以有效地解决机组甩负荷后转速上升和蜗壳进口压力上升的问题。