在高速气流粉碎作用下PVC的力化学降解及形态变化的研究

通过ＧＰＴ、ＦＴ－ＩＲ、ＳＥＭ和力学性能测试，研究了在高速气流作用下聚氯乙烯（ＰＶＣ）的力化学降解反应、颗粒形态和微晶结构变化及其对ＰＶＣ物理、力学性能的影响。实验结果表明，经过高速气流处理ＰＶＣ，分子量将有所降低，晶体结构发生变化，颗粒尺寸和表观密度降低，比表面积增大，加工性能和力学性能得到明显改善。     

喷嘴结构对高压射流特性影响研究

自20世纪70年代以来,高压水射流技术已在各工业领域逐渐得到了广泛应用,但迄今仍未能大规模采用,原因是还存在一些有待解决的问题,其中最为迫切的就是如何提高喷嘴射流效率、充分利用其能量的问题。喷嘴是水射流技术应用中获得高能量利用率的关键因素之一,其结构好坏直接影响射流质量。为充分发挥喷嘴最大效率,最大限度地利用水力能量,国内外有关专家从理论分析、数值计算和实验研究3个方面对喷嘴结构与高压射流特性的关系进行了研究分析,结果表明喷嘴结构对射流流动特性、冲蚀性能、空化现象等产生重要影响,指出提高喷嘴效率应当着眼于以下几个方面:加强基础研究;改变射流作用方式、将连续射流调制成脉动射流;充分利用空化空泡破裂压力,研制开发优质喷嘴,以期对拓宽水射流技术在工业中的应用有所帮助。     

Experimental and computational analysis on guide vane losses of impulse turbine for wave energy conversion

This paper deals with the detailed flow analysis of impulse turbine with experimental and computed results for wave energy power conversion. Initially, several turbulence models have been used in two-dimensional (2-D) computational fluid dynamic (CFD) analysis to find a suitable model for this kind of slow speed unconventional turbine. Experiments have been conducted to validate the CFD results and also to analyze the aerodynamics at various stations of the turbine. The three-dimensional (3-D) CFD model with tip clearance has been generated to predict the internal flow and to understand the effect of tip clearance leakage flow on behavior of the turbine in design and off-design conditions. As a result, it is found from the 2-D results that the comparison between computed and experimental data is good, qualitatively and the turbulence model, standard k–ε can predict the experimental values reasonably well, especially the efficiency of the turbine. Experimental results reveal that the downstream guide vanes are more responsible for low efficiency of the turbine and it is measured that 21% average pressure is lost due to downstream guide vanes. It is proved from the 3-D CFD model with tip clearance that it can predict the experimental values quantitatively and qualitatively. Furthermore, it is estimated from the computed results that the efficiency of the turbine has been reduced about 4%, due to tip clearance leakage flow at higher flow coefficients.     

转炉煤气风机叶轮故障诊断及处理措施

对转炉煤气风机叶轮故障进行诊断,分析了故障产生的原因,提出了处理措施,延长了设备使用寿命。     

火箭燃气射流对斜板冲击流场的数值模拟

采用高精度，高分辨率的二阶ＴＶＤ有限体积方法，对二维无粘射流冲击斜板的复杂流动场进行了数值模拟，得到了和实验规律相一致的计算结果。     

超细粉颗粒形貌控制技术的研究

颗粒形貌对颗粒群的许多性质具有重要的影响。本研究以流化床气流磨加工碳化硅磨料微粉为实例，对颗粒形貌控制的基本因素进行理论分析与实验研究，并探讨了超细加工后的整形技术及超细加工前的预处理技术。可获得球形化程度好的等积形颗粒形貌，也可获得较好的多棱形颗粒形貌，这对提高超细粉的工业价值和经济价值，扩大应用领域和范围，具有重要的意义。     

NICKEL-BASED ALLOYS IN GE AIRCRAFT TURBINES：PAST,PRESENT ＆ FUTURE

1. Introduction Freedom to travel anywhere in the world, both quickly and inexpensively, defines our modern era. Despite year-to-year variation, the long term demand for travel by airplane continues to grow. Three ma- jor systems comprise the modern airplane: the aircraft structure that encompasses the fuselage, wings, and landing gear; the avionics that enable flight through crowded skies in nearly all weather conditions; and the propulsion system that powers the aircraft. Improvements in mat…     

双作用变量叶片泵自动控制系统的机理分析

文章介绍了一种双作用变量叶片泵自动控制系统,通过电脑控制变频器,改变叶片泵转速,达到粗调目的;电脑控制电液数字阀,起微调作用.蓄能器的利用,进一步增了系统的稳定性.     

用直接纺丝法制芳纶短纤维

研究了直接纺丝制取芳纶短纤维的新方法。讨论了纤维长度、直径及力学性能与纺丝条件的关系。发现影响纤维长度的主要因素是空气层高度和喷丝速度,影响纤维直径的主要因素为喷口直径及喷丝速度。此外,还用PPTA短纤维制成了均匀的PPTA"浆粕"纤维。     

气流床气化炉停留时间分布的随机模型

基于气流床气化炉流动特征 (区域模型 ) ,进行状态离散 ,建立停留时间分布随机模型。模拟结果与实验值相符 ,显示气化炉内是随机过程 ,证实炉内存在回流和短路 ,流型趋向于全混流