Ski jump trajectory with consideration of air resistance

In the case of the ski-jump type energy dissipation,the jet trajectory will be greatly affected by the air entrainment and the air resistance.It is necessary to consider those factors when estimating the trajectory of the jet flow.In this work,the effect of the air resistance on the jet trajectory is theoretically and experimentally investigated.A comprehensive resistance coefficient is proposed.To determine this coefficient,experiments of five models are conducted with the circular-shaped flip bucket placed at the point of the takeoff of ski jumps.It is shown that,this coefficient of the lower jet trajectory is only related to the approach flow Froude number,while that of the upper jet trajectory is dominated by both this Froude number and the deflection angle.Furthermore,the present methodology is validated by experimental data in this work and the maximum errors are not larger than 3.2%and 8.6%for the lower and upper jet trajectories,respectively.     

NUMERICAL STUDY OF HYDRODYNAMICS OF MULTIPLE TANDEM JETS IN CROSS FLOW

The hydrodynamics of a single jet and four tandem jets in a cross flow are simulated by using the Computational Fluid Dynamics (CFD) software Fluent. The realizable model is used to close the Reynolds-Averaged equations. The flow characteristics of the jets, including the jet trajectory, the velocity field and the turbulent kinetic energy are obtained with various jet-to-cross flow velocity ratios in the range of 2.38-17.88. It is shown that a single jet penetrates slightly deeper than the first jet in a jet group at the same , although the difference decreases with the decrease of . It is also found that the way in which the velo-city decays along the centerline of the jet is similar for both a single jet and the first jet in a group, and the speed of the decay increases with the decrease of . The downstream jets in a group are found to behave differently due to the sheltering effect of the first jet in the group. Compared with the first jet, the downstream jets penetrate deeper into the cross flow, and the velocity decays more slowly. The circulation zone between the two upstream jets in the front is stronger than those formed between the downstream jets. The Turbulent Kinetic Energy (TKE) sees a distinct double-peak across the cross-sections close to each nozzle, with low values in the jet core and high values in the shear layers. The double-peak gradually vanishes, as the shear layers of the jet merge further away from the nozzle, where the TKE assumes peaks at the jet centerline.     

DRILLING CHARACTERISTICS OF COMBINATIONS OF DIFFERENT HIGH PRESSURE JET NOZZLES

The high speed fluid jet for directly or indirectly breaking rock is one of the most effective ways to improve the deep penetration rate.In order to maximize the efficiency of energy use,the flow characteristics of different combinations of high pressure jet nozzles are analyzed through numerical simulations.According to the velocity vectors at the bottom and the bottom hole pressure diagram,the effects of the high pressure nozzle combinations on the flow structure and the penetration rate are analyzed.It is shown that the combination of three vertical edge nozzles is very efficient,but inefficient in cleaning the bottom hole and eroding the wall.The jet velocity is 400 m/s and the radius is 5 mm,with a center nozzle added,the problem can be solved,but the high-pressure fluid displacement would increase.The center nozzle’s jet velocity is 200 m/s and the radius is 8 mm,the combination of two vertical edge nozzles and a center tilt nozzle or that of a vertical edge nozzle and a center tilt nozzle would provide a flow structure favorable for drilling.The angle of inclination is 10o.To take advantage of high pressure jet energy to improve the efficiency of drilling,it is important to select a suitable nozzle combination according real conditions.     

新立城水库坝基防渗高压摆喷灌浆参数试验

新立城水库土坝坝基属于双层地基,即表层为粘性土层,下面为沙砾石层。坝基下砾质粗砂和细砾为强透水层,连续分布。因需要防渗的透水层不厚(仅2～5m),采用高压喷射灌浆封堵透水层。施工前选定与坝段同样地质条件的试验场,用实际施工的喷灌设备分不同方案进行原型试验,开挖后观察成墙效果,最后确定施工技术参数。     

小型水电站水轮机导叶关闭规律的优化——以猴场水电站为例

以猴场水电站为例,探讨了小型水电站水轮机导叶关闭规律的优化。在水轮机组的GD2值因制造难度等原因不能加大时,采用导叶关闭的方法,通过优化导叶关闭规律,以满足水电站水力过渡过程计算的要求,从而可以有效地解决机组甩负荷后转速上升和蜗壳进口压力上升的问题。     

多泥沙电站高水头低出力水轮机水力设计策略

在多泥沙河流运行的水轮机,经常受到严重的泥沙磨损危害,机组的检修周期及运行寿命普遍较低。特别是对于高水头低出力要求的水轮机,机组磨损情况往往更为严重。为提高机组的抗磨损性能,水力设计阶段需专门考虑降低流道流速进而提高抗磨损性能的方法。本文以木扎提河三级水电站小水轮机的设计为例,综合考虑易磨损部位的相对流速及机组水力性能,确定了适用于高水头小流量多泥沙电站的水轮机水力设计策略。研究表明常规降低转速的方法对转轮及导叶出口流速、密封间隙内流动均有显著影响,转速降低的程度应通过流场对比分析合理确定。在高水头电站导叶尾部磨损更为严重,通过采取增大分度圆、优化导叶翼型及相对位置等可有效降低导叶后相对流速。采用长短叶片转轮,可大大降低转轮内部流速,提高在高含沙条件下机组的抗磨损性能,提升水轮机的运行稳定性及安全使用寿命。本文的研究可为多泥沙电站的水轮机设计策略提供有效参考。     

金刚石自支撑膜的高温红外透过性能

由于金刚石具有低吸收和优异的力学与导热性能使其成为长波(8~12μm)红外光学窗口材料的重要选择。对于许多极端条件的应用,化学气相沉积(CVD)金刚石自支撑膜的高温光学性质至关重要。应用直流电弧等离子喷射法制备光学级金刚石自支撑膜进行变化温度的红外光学透过性能研究,采用光学显微镜、X射线衍射、激光拉曼和傅里叶变换红外-拉曼光谱仪检测CVD金刚石膜的表面形貌、结构特征和红外光学性能。结果表明:在27℃时金刚石膜长波红外8~12μm之间的平均透过率达到65.95%,在500℃时8~12μm处的平均透过率为52.5%。透过率下降可分为3个阶段。对应于透过率随温度的下降,金刚石膜的吸收系数随温度的升高而增加。金刚石自支撑膜表面状态的变化,对金刚石膜光学性能的影响显著大于内部结构的影响。     

Investigation on the cutting quality characteristics of abrasive water jet machining of AA6061-B4C-hBN hybrid metal matrix composites

Aluminum metal matrix composites (AMMCs) explicitly show better physical and mechanical properties as compared to aluminum alloys and results in a more preferred material for a wide range of applications. The addition of reinforcements embargo AMMCs employment to industry requirements by increasing order of machining complexity. However, it can be machined with a high order of surface integrity by nonconventional approaches like abrasive water jet machining. Hybrid aluminum alloy composites were reinforced by B₄C (5–15?vol%) and solid lubricant hBN (15?vol%) particles and fabricated using a liquid metallurgy route. This research article deals with the experimental investigation on the effect of process parameters such as mesh size, abrasive flow rate, water pressure and work traverse speed of abrasive water jet machining on hybrid AA6061-B₄C-hBN composites. Water jet pressure and traverse speed have been proved to be the most significant parameters which influenced the responses like kerf taper angle and surface roughness. Increase in reinforcement particles affects both the kerf taper angle and surface roughness. SEM images of the machined surface show that cutting wear mechanism was largely operating in material removal.     

双股射流壁面脉动压强与近壁紊动流速相关与频谱特性

本文用多通道动态压力检测系统和二维激光测速仪对在单股和双股射流作用下,水垫塘底板脉动压强与近壁脉动流速的相关,功率谱和紊动比尺进行了测试研究。实测表明,双股射流形成的动水扩建在塘底水平方向的脉动使得双股射流在第二冲击点下游的脉动量特性与单股射流不同：前者的水平脉动速度与脉动压强的互相关系数较后者明显增大,且水平脉动速度和脉动压强的功率谱具有大致相同的优势频率。单股和双股射流塘底脉动压强系数与近壁紊     

LG-2/130型管道式旋转喷射泵的研制

介绍了旋转喷射泵的原理、结构特点和设计计算，以及LG-2／130型旋喷泵的研制和应用等情况。