Adhesive Dispensing Process Analysis: Steady-State Dispensing of One-Component Adhesives

The process of dispensing one-component heat-cure adhesives was investigated in order to understand current application processes and to guide new process development. Typical one-component adhesives exhibit non-Newtonian rheological behavior, and hence Newtonian fluid mechanics does not adequately describe the dispensing process. In the present study, the adhesives were modeled as Bingham fluids possessing a yield stress and a steady state viscosity. The model of the dispensing apparatus includes four major flow sections connected in a serial configuration. The fluid mechanics equations derived for Bingham fluids in the individual flow sections were solved by numerical methods in order to understand the interrelationships between the material variables (e.g. yield stress, viscosity, temperature dependencies) and process variables (e.g. pressure, flow geometry, temperature, output). The concept of the model is generic and the details of the model can be modified for any forced-flow adhesive application process.

The adhesive flow properties significantly influence the process output. Dispensing temperature, among the process variables, has the strongest effect on process output. A ± 1.0·C perturbation in the dispensing temperature can cause as much as a 14% variation in the bead size for the range of adhesives studied. Differences in flow characteristics result in differences in processability and non-linear temperature/pressure sensitivity. The non-linear sensitivity can be eliminated by operating the dispensing process isothermally. Finally, the process limits for one-component adhesives, which are susceptible to chemical instability induced by viscous heating during processing, are defined and discussed in terms of a modified Brinkman number that takes into account viscous dissipation, heat conduction and convection, and chemical stability of the material during processing.     

刹车片减震胶的研制

讨论了高邻位酚醛树脂合成及其它助剂对减震胶性能的影响。研究试制出一种综合性能好的减震胶。     

浅谈集成材用胶粘剂及其发展趋势

本文简单介绍了集成材胶粘剂的选择、种类和特点，并探讨了集成材用胶粘剂的发展趋势。     

贮存稳定的聚氨酯干式复合胶粘剂的研究

研制了一种具有高固含量、低粘度的干式复合用双组分聚氨酯胶粘剂，考察了聚酯多元醇，扩链剂丙三醇／乙二醇（摩尔比）、NCO／OH（摩尔比），双组分胶配比以及缓凝剂等因素对该胶粘剂性能的影响，并用红外光谱对胶的固化过程进行了表征。结果表明，该胶粘剂具有较高的粘接强度，优良的低温流动性和贮存稳定性。     

低温导热绝缘胶粘剂研究

一种低温导热绝胶粘剂用于氢氧发动机系统表面温度传感器的端封和胶接安装，介绍了胶粘剂的技术要求，研究方案及试验结果。以DW－3超低温胶粘剂为基础，经改性设计后，仍能保持胶粘剂原有的耐低温特性，而且其导热，绝缘等性能均能满足设计和使用要求。     

用废聚苯乙烯塑料制备胶粘剂的综述

废聚苯乙烯泡沫塑料在自然界中不能自然降解而正成为严重的社会公害，其综合利用在当今社会越来越受到重视。本文着重分析了聚苯乙烯塑料在我国的消费状况并阐述了利用废旧泡沫塑料研制和开发各种不同用途胶粘剂的进展     

改性己二胺制备TG301环氧树脂室温固化剂

已二胺经与环氧树脂进行羟烷基化及与丙烯腈进行氰乙基化反应达到改善低熔点低毒性．低脆性的综合效果．文中介绍了改性乙二胶固化剂的制备方法，质量指标和有关固化特性等．     

Surface treatment for adhesive-bonded joints by excimer laser

In this work a treatment for surface preparation to improve mechanical resistance in adhesive bonding of plastic composites reinforced with fibres and metallic material, has been performed using an excimer laser. The following couplings have been selected to reproduce joints commonly used in the aerospace and automotive industry: CFC (carbon fibre composite) with CFC, CFC with Al 2024T3, Al 99% with Al 99%, GFC (glass fibre composite) with zinc-coated sheet in low carbon steel FeP01. The surfaces have been prepared using an excimer laser, adopting several values of laser parameters. The obtained surfaces have been examined by optical and scanning electron microscope: comparative measures of wetting and roughness have been performed to obtain an accurate characterisation and to select the proper finishes suitable to improve the mechanical resistance of the joints. The results obtained show that laser treatment always improves the final resistance of the joint; notable increases, and no significant surface damages have been highlighted. Better results have been obtained with the Al 99% with Al 99% joints which, with a low number of pulses treatment, have shown an increase of mechanical resistance up to the 70%.     

环氧树脂流变学的研究进展

综述了近20年来环氧树脂流变学的研究进展。利用流变学来指导环氧树脂的最新应用,包括环氧树脂电子浆料例如底部填充胶（underfill）,环氧树脂基复合材料,环氧树脂涂料,环氧树脂黏合剂,环氧树脂与其他树脂/橡胶的复合体系等。环氧树脂体系中的填料规格、加入量以及环氧树脂的固化过程与黏度等流变指数息息相关。随着芯片等领域技术的快速发展,流变学在环氧树脂中的应用还会得到进一步加强。     

CR／MMA乳液接枝共聚物的研制

用乳液接枝共聚法制备ＣＲ／ＭＭＡ共聚物，讨论ＣＲ乳液、引发剂、接枝温度、ＭＭＡ用量对接枝共聚转化率，接枝ＭＭＡ含量、ＭＭＡ接枝效率和粘接性能的影响，用红外光谱对接枝共聚物进行表征，该共聚物具有较好的粘接性能。