2A14-T6铝合金大规格棒材时效制度的研究

2A14铝合金大规格棒材性能不稳定，在生产中抗拉强度常达不到国家标准要求。经过一系列热处理工艺试验，确定了2A14-T6合金大规格棒材的人工时效制度。     

大型弹簧钢片开裂原因分析

为保证大型弹簧钢片在热处理过程中，不发生开裂和翘起度超差，重新制订了热处理工艺。通过增加高温回火、降低淬火温度、加快冷却速度等手段，获得了最好的效果。     

我国型钢生产技术进步20年及展望

按小型材、棒线材、中型材、轨梁和大型材分类 ,对 2 0年来我国在型钢生产领域的主要技术进步进行了总结 ,对其生产现状进行了分析 ,对其发展前景进行了展望     

区域烧结法制备高温气体清洁用大尺寸陶瓷过滤管

用区域烧结在1 d内可完成高温气体清洁用1.5 m陶瓷过滤管的制备过程,区域烧结的优势是缩短研究和开发周期.目前,经过认真设计,已经完成区域烧结设备.多孔陶瓷件比致密陶瓷件更容易烧结成型,原因是多孔陶瓷在区域烧结期间可免除其收缩和变形.     

大面积水域浓度场测试方法及系统研究

针对大面积水域浓度场难以实现实时测量、测量精度不高等问题,采用了一种多通道荧光测试系统和方法。首先,基于单色光诱导荧光检测浓度(LIF)原理,使用探头获取离散点的浓度参数。然后,经总线或通信网络技术,将数百个测点连接起来。最后,通过数据总线或网络将采集的数据输送到中央测控计算机中,处理离散的数据后形成完整的浓度场。在恒定流浓度场中的试验结果表明,污染物测量相对误差均值不超过5%,单次测量相对误差最高值为8.33%,传感器线性度不超过5%,可检测的荧光素钠溶液浓度分辨率为0.001 ppm,系统测量稳定、精度较高。相较于其他浓度测量方法,该系统具有测量面积大、实时测量的优势,可为水污染防治等领域提供可靠的技术支撑。     

Geomorphic diversity as a river management tool and its application to the Ganga River,India

Understanding of geomorphic processes and the determination of geomorphic diversity in catchments are prerequisites for the sustainable rehabilitation of river systems and for reach‐scale assessment of river health. The Ganga River system in India is a large, complex system consisting of several long tributaries, some >1,000 km, originating from 2 distinct hinterlands—the Himalaya to the north and the cratons to the south. Traversing through a diverse climatic regime across the Plain and through precipitation zones ranging from 600 mm/year near Delhi to 1,200 mm/year in the eastern plains, the Ganga River system has formed very diverse landform assemblages in 3 major geomorphic domains. We have recognized 10 different river classes for the trunk river from Gangotri (source) to Farakka (upstream of its confluence with the Brahmaputra) based on (a) landscape setting, (b) channel and active floodplain properties, and (c) channel planform parameters. The mountainous stretch is characterized by steep valleys and bedrock channels and is dominated by large‐scale sediment production and transport through hill slope processes. The alluvial part of the river is characterized by 8 different river classes of varying reach lengths (60–300 km) many of which show sharp transitions in landscape setting. We have highlighted the application of this approach for the assessment of habitat suitability, environmental flows, and flood risk all of which have been significantly modified during the last few decades due to large‐scale anthropogenic disturbances. We suggest that the diversity embedded in this geomorphic framework can be useful for developing a sustainable river management programme to “work with” the contemporary character and behaviour of rivers.     

Application of an improved control-variate scheme to local neoclassical transport simulations

A new radially local neoclassical transport code is developed based on the radially global two-weight δf$\delta f$ Monte Carlo code, FORTEC-3D (Satake et al., 2008). In the collisional two-weight δf$\delta f$ method, the variance of weight increases in time due to the so-called weight spreading, which leads to an increasing numerical noise in long time simulations. A new improved control-variate scheme was proposed by Kleiber et al. (2011) to reduce the variance. We investigate the effectiveness and validity of the new control-variate scheme for a practical collisional transport problem in a plasma described by the drift kinetic equation. It is demonstrated that the new scheme reduces the variance of weight by approximately 75% in an axisymmetric magnetic field configuration. The burst-like behavior of a transport observable caused by a large numerical noise can be avoided. As a result, the time evolution of a transport observable can be successfully smoothed.     

岩体结构面对大跨度隧道工程稳定性影响初步研究

基于对沈阳至大连（简称沈大）高速公路扩建工程韩家岭隧道区域调查和分析，研究了岩体结构面对隧道施工过程的影响，围岩失稳方式及可能遇到的问题，并提出了解决这些问题的措施。     

Computer simulation of the filling process in gas‐assisted injection molding based on gas‐penetration modeling

Gas‐assisted injection molding can effectively produce parts free of sink marks in thick sections and free of warpage in long plates. This article concerns the numerical simulation of melt flow and gas penetration during the filling stage in gas‐assisted injection molding. By taking the influence of gas penetration on the melt flow as boundary conditions of the melt‐filling region, a hybrid finite‐element/finite‐difference method similar to conventional‐injection molding simulation was used in the gas‐assisted injection molding‐filling simulation. For gas penetration within the gas channel, an analytical formulation of the gas‐penetration thickness ratio was deduced based on the matching asymptotic expansion method. Finally, an experiment was employed to verify this proposed simulation scheme and gas‐penetration model, by comparing the results of the experiment with the simulation. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2377–2384, 2003     

大型机械轴承相对标高测试系统

介绍了一种使用连通管、电涡流传感器测量轴承相对标高的测试系统,它能准确测量大型机械相邻轴承的相对标高变化.文中叙述了其测量原理、特点以及系统的硬件电路和软件设计,最后给出一个测试实例,并对测量结果进行了简要分析.