大截面金属镍棒的焊接工艺与实践

金属镍在电渣精炼前需用氩弧焊焊接接长,为保证焊接接头具有足够熔深,需要大参数进行焊接.采用直流焊机并联使用解决了焊机电流不足的情况,通过采取垫高镍棒端头,使接缝处于受压状态,以防止裂纹的产生.     

Analysis of supersaturation and nucleation in a moving solution droplet with flowing supercritical carbon dioxide

A supercritical antisolvent (SAS) process is employed for production of solid nanoparticles from atomized droplets of dilute solution in a flowing supercritical carbon dioxide (SC CO₂) stream by attaining extremely high, very rapid, and uniform supersaturation. This is facilitated by a two‐way mass transfer of CO₂ and solvent, to and from the droplet respectively, rendering rapid reduction in equilibrium solubility of the solid solute in the ternary solution. The present work analyses the degree of supersaturation and nucleation kinetics in a single droplet of cholesterol solution in acetone during its flight in a flowing SC CO₂ stream. Both temperature and composition are assumed to be uniform within the droplet, and their variations with time are calculated by balancing the heat and mass transfer fluxes to and from the droplet. The equilibrium solubility of cholesterol with CO₂ dissolution has been predicted as being directly proportional to the Partial Molar Volume Fraction (PMVF) of acetone in the binary (CO₂–acetone) system. The degree of supersaturation has been simulated up to the time required to attain almost zero cholesterol solubility in the droplet for evaluating the rate of nucleation and the size of the stable critical nuclei formed. The effects of process parameters have been analysed in the pressure range of 7.1–35.0 MPa, temperature range of 313–333 K, SC CO₂ flow rate of 0.1136–1.136 mol s^?1, the ratio of the volumetric flow rates of CO₂‐to‐solution in the range of 100–1000, and the initial mole fraction of cholesterol in acetone solution in the range of 0.0025–0.010. The results confirm an extremely high and rapid increase in degree of supersaturation, very high nucleation rates and stable critical nucleus diameter of the order of a nanometre. Copyright © 2005 Society of Chemical Industry     

In the theory of blast waves

The behavior of the blast wave from an exploding spherical volume is investigated mathematically over the entire range of blast-wave propagation. The computational method uses analytical results for a similar problem for a point explosion with counter pressure and the theory of an asymptotically equivalent point explosion. The asymptotic solution of the gas-dynamic equations away from the explosion site is matched to the initial conditions of blast-wave formation due to the disintegration of the detonation shock upon its arrival at the boundary of the exploding volume. The spatial distribution of the blast-front pressure is found for combustible gaseous systems and solid explosives. The theoretical results obtained agree quantitatively with available experimental measurements. __________ Translated from Fizika Goreniya i Vzryva, Vol. 42, No. 4, pp. 93–99, July–August, 2006.     

变温条件下HDPE/CB的正电子湮灭特性

对掺杂了25份（phr）导电炭黑（CB）的样品进行了正电子湮灭寿命谱的变温测量，在玻璃化转变温度以上，随着温度的增加，自由体积的大小线性增加，在玻璃化转变温度以下，自由体积的大小基本不变，o-Ps的强度在－40℃下基本不变，从－40℃以上开始增加，但在50℃以上上升有加快的趋势，与PTC材料的PTC现象和导电性能有一定的关联。     

浅谈诺兰达工艺控制

介绍了诺兰达炉氧平衡控制方法 ,对控制中常见的问题总结了一些相应措施。     

一种提高低温流体比体积计算精度的方法

采用了一个既能提高立方型状态方程比体积计算精度，又不影响气液平衡条件的简单摩尔修正项来改进PR方程比体积的计算。本文对19种低温流体给出其修正项的值，计算饱和蒸气和液体比体积，并与未修正的PR方程的计算值比较，结果表明这种修正能显著提高低温流体（包括量子流体氢、氦和强极性的氨气）饱和液体比体积的计算精度，并对蒸气比体积的计算也略有改进。     

露天矿山牙轮钻机主参数确定探讨

通过对牙轮钻、轴压、钻头速度、排碴风量、排碴风压的论述得出了如何调定牙轮钻的参数，为以后我矿牙轮钻在生产中获取最大经济效益积累了有益的资料。     

碘量法测铜中物质性质和分析操作

本文讨论了碘量法测定铜量中一些有关物质的特性,以及这些性质对分析条件和操作的要求。     

无差拍控制提高变速异步风力发电系统的故障承受能力

变速风力发电机对于电网扰动、故障以及电网电压跌落非常敏感，当上述情况发生时风力发电机将从电网切除，直到电网恢复正常才能重新投入运行。如何在电网发生扰动时保持风力发电机的正常运行是一个有挑战性的课题。未来的电网规范甚至要求在电网发生故障时风力机组仍能保持运行，这就要求必须安装保证风电机组低电压运行的控制装置。文中针对采用全载换流器与电网进行连接的异步风力发电机组提出了相应的风电机组低电压控制器及控制策略，无须进行硬件改造即可实现电网故障情况下风电机组不退出运行。其中，风电机组电气子系统控制器基于无差拍控制策略进行设计。算例给出了300 kW的风电机组在30%电压跌落情况下的暂态过程，没有加入控制器之前风电机组将停机，加入之后则可以保持运行，验证了所提方法的正确性。