甲基丙烯酸三氟乙酰氧乙酯的聚合

对甲基丙烯酸三氟乙酰氧乙酯(TFAOEMA)的阴离子聚合及原予转移自由基聚合进行了研究。常用的阴离于引发剂如丁基锂、1，1-二苯基已基锂等很难引发TFAOEMA的阴离子聚合，而碱性较弱的引发剂如三乙基铝却容易引发，且产率较高。以氯化亚铜、五甲基二乙基三胺、溴代丙酸乙酯为引发体系的TFAOEMA的本体原子转移自由基聚合符合活性聚合特征。但在四氢呋喃为溶剂的原子转移自由基聚合中却存在活性中心失活现象。以末端含卤素的聚甲基丙烯酸甲酯为大分子引发剂，引发TFAOEMA的原子转移自由基聚合，得到了含氟双嵌段聚合物。     

The effects of glycol methacrylate as a dehydrating agent on the dimensional changes of liver tissue

The dimensional changes of liver sections during the course of processing with glycol methacrylate (GMA) or with ethanol are described. Tissue processing with ethanol served as a control. During prolonged processing steps (24 h each), linear shrinkage of tissue specimens dehydrated with GMA at room temperature was 13.2%. Subsequent infiltration with GMA resulted in trivial swelling, and polymerization in slight shrinkage (2.3%). In comparison, processing with cold GMA resulted in shrinkage during dehydration (about 10.8%), a slight swelling in pure GMA, followed by shrinkage during polymerization (2.2%). Short routine processing schedules resulted in similar shrinkage/swelling patterns, although precise values differed slightly. In all experiments, ethanolic dehydration resulted in smaller dimensional tissue changes than did GMA dehydration. The dimensional changes of tissue sections during stretching on water, mounting and drying compensated for the major part of the shrinkage manifested during processing.     

A method for the preparation of PMMA-SiO2 nanocomposites with high homogeneity

It is possible to optimize the performance of the inorganic-organic composites dispersing the inorganic component in the organic matrix on a nanomiter length scale. If dry the inorganic phase cannot be intimately dispersed during the incorporation in the matrix. When the particle surface is organically modified, and the incorporation is made starting from a liquid dispersion (particles in polymer solution), the resulting composites exhibit an excellent homogeneity. Here, monolithic [poly(methyl methacrylate)/monodisperse silica particles] nanocomposites have been prepared and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), micro-hardness, and differential scanning calorimetry (DSC).     

DSC and DMTA characterization of ternary blends

The phase behavior of ternary blends made of poly(epichlorohydrin) (PECH), poly(vinyl acetate) (PVAc) and poly(methyl methacrylate) (PMMA) has been investigated by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). DMTA measurements have been shown to be more sensitive than DSC for the detection of a second phase, for the determination of the composition of each phase, and the distribution of PECH in each of them. About 70% PECH was required to obtain a single narrow T_g in the ternary system, which suggests a single homogeneous phase in the limit of sensitivity of DMTA. This study also emphasizes the importance of the composition of the immiscible polymer pair (i.e. the PVAc/PMMA pair in the PECH/PVAc/PMMA system), in addition to the thermodynamic interaction parameters, for controling the phase behavior of ternary systems.     

Hot-drawing of poly(methyl methacrylate) and simulation using a glass-rubber constitutive model

The large-deformation three-dimensional glass-rubber constitutive model for isotropic, amorphous, linear polymers near the glass transition, previously proposed, has been extended to include a spectrum of network relaxations. In addition, an experimental programme of uniaxial tension and compression tests was carried out on high molecular weight cast sheets of poly(methyl methacrylate) (PMMA), with varying strain-rate and temperature across the range from 114 to 190 °C, encompassing the thermoforming range of practical importance. The extended model was found to fit successfully the data for PMMA, provided a doublet network relaxation spectrum was employed. The original model, with only a single network relaxation, was found to be grossly inadequate when there was significant network relaxation by entanglement slippage. Parameters of the model for PMMA, obtained by fitting to the new data, were compared with values obtained by other routes.     

丙烯酸酯与甲基丙烯酸酯的共聚及性能研究

采用悬浮聚合法，以丙烯酸－２－乙基－己酯与甲基丙烯酸十二酯为单体，合成了共聚型高吸油性树脂。研究了共聚单体的配比、交联剂用量、引发剂用量诸因素对高吸油性树脂的性能影响。制得的树脂可以吸其自身质量的１１．８倍的煤油、１４．７倍的苯、６．５倍的泵油。     

Cover Picture: Toward Large‐Scale Alignment of Electrohydrodynamic Patterning of Thin Polymer Films (Adv. Funct. Mater. 15/2006)

By integrating lithography and self‐assembly via electrohydrodynamic instabilities, Russel and co‐workers are able to guide initially flat polymer films to evolve into periodic arrays of pillars over regions much greater in extent than their natural domain sizes, as detailed on p. 1992. Novel structures that involve a combination of linear ridges and pillars are also produced, mainly as as result of the dynamic merging among preformed pillars. To pattern thin polymer films via electrohydrodynamic instabilities, we design and utilize two different kinds of mask patterns to guide pillars into alignment over regions much greater in extent than their natural domain sizes. First, narrow protruding ridges that intersect to form regular patterns on the mask trigger the growth of pillars beneath. Later, square and triangular packings of pillars develop in the regions enclosed by those ridges, preserving the registry from one domain to the next over a much larger area than within individual domains in unpatterned portions of the mask. Second, small square protrusions that are prealigned into a large regular array on the mask guide the formation of square packings of pillars in domains that conform to the mask, forming a large array of pillars. Novel structures involving a combination of linear ridges and pillars are also produced mainly due to the dynamic merging among preformed pillars. Finally, we find vertex symmetry of the mask pattern is necessary for generating and preserving ordered patterns on the polymer film.     

Synthesis and characterisation of N-toluyl methacrylatoethyl carbamates,homopolymers and copolymers with methyl methacrylate

The paper describes the synthesis of N-2/4-toluyl methacrylatoethyl carbamates using 2/4-toluyl isocyanate and 2-hydroxyethyl methacrylate. Homopolymerisation and copolymerisation of these novel monomers with methyl methacrylate was carried out using benzoyl peroxide as an initiator and tetrahydrofuran as solvent. Photopolymerisation of N-4-toluyl methacrylatoethyl carbamate could be carried out without the use of photosensitiser. Structural characterisation of copolymers was done using ¹H-NMR. Thermal stability of copolymers was evaluated in a nitrogen atmosphere by dynamic thermogravimetry.