Porous ceramics with tailored pore size and morphology as substrates for coral larval settlement

The growing demand for stony corals as ornamental aquarium animals requires defined aquacultural breeding strategies. For the sexual propagation of corals, material substrates are needed, that attract larvae and support their settlement and development. In this study, five types of highly porous ceramic materials were developed following the example of coral skeleton. The applicability of these settlement substrates was tested using larvae of the stony coral Pocillopora damicornis. Partial sintering of pressed clay pellets, freeze casting of clay and alumina-mullite based slurries and direct foaming of high alkane phase emulsified suspensions (HAPES) using alumina were employed. By the addition of mm-sized spherical polystyrene beads as sacrificial templates during freeze casting (alumina-mullite), superficial pores in the size of the larvae were created. The inorganic substrates featured open porosities between 35% (pressed clay) and 83% (foamed alumina), pore sizes ranging from nm to mm-scale and pore morphologies dominated by interparticle porosity (pressed), lamellar pores (freeze casting) and cellular pore types (direct foaming). The ceramic substrates were incubated in artificial sea water for 3 months to induce necessary biofilm formation and algae growth. Afterwards, individual substrates were exposed to 5 coral larvae, and their settlement behavior was monitored over 14 days. At the end of this period, all ceramic materials were successfully accepted as settlement substrates, with a mean settlement rate of 46.2%, and no significant differences between the substrate types. On samples with large surface superficial pores, a significantly reduced survival of settled larvae (79%) compared to the other porous materials (93–98%) was determined, suggesting a non-ideal surface topography. While alumina foam samples (HAPES) exhibit the most promising results in terms of settlement and survival of larvae, clay-based substrates provide a more economic solution for the sexual propagation of corals in aquaculture.     

Methacrylate hydrogels reinforced with bacterial cellulose

Composite hydrogels consisting of nanofibrous bacterial cellulose (BC) embedded in a biocompatible polymeric matrix of various methacrylates were synthesized by UV polymerization using the ‘ever‐wet’ technique. The effect of monomer(s) type and ratio, system dilution at polymerization, monomer(s) hydrophilicity, crosslink density and cellulose/hydrogel ratio was investigated. The effect of BC reinforcement on equilibrium swelling depends on whether the neat gel swells more when brought into contact with water. The major improvement achieved by introduction of 1%–2% BC concerns mechanical properties. Compared with neat gels, the storage shear modulus G′ increased by a factor 10‐20, and the loss part G″ also rose significantly. The compression modulus ranged from 2 to 5.5 MPa for composites swollen to equilibrium (20‐70 wt% water). The BC‐hydrogel composites are considered for application in the tissue engineering area. Copyright © 2012 Society of Chemical Industry     

Tristable switching of the electrical conductivity through graphene quantum dots sandwiched in multi-stacked poly(methyl methacrylate) layers

Tristable switching nonvolatile memory (NVM) devices based on graphene quantum dots (GQDs) sandwiched between multi-stacked poly (methyl methacrylate) (PMMA) layers were fabricated on indium-tin-oxide (ITO)-coated glass substrates by using a solution-processed method. Current-voltage (I-V) curves at 300 K for the silver nanowire/PMMA/GQD/PMMA/GQD/PMMA/ITO/glass devices showed tristable switching currents with high-resistance, intermediate-resistance, and low-resistance states. The device's cycling endurance of the three resistance states remained stable with a distinguishable value for each resistance state over 1000 cycles, and the obtained retention results showed well-distinguished resistance states without degradation for up to 1 × 10⁴ s. Schottky emission, Poole-Frenkel emission, trapped-charge limited-current, and ohmic conduction were proposed as the dominant conduction mechanisms for the fabricated NVM devices based on the obtained I-V characteristics. The described energy-band diagrams confirm the proposed conduction band mechanisms.     

Barrier effect of flame retardant systems in poly(methyl methacrylate): Study of the efficiency of the surface treatment by octylsilane of silica nanoparticles in combination with phosphorous fire retardant additives

In this work, flame retardant systems comprising ammonium polyphosphate (AP423) and hydrophilic (A200) or hydrophobic (R805) nanometric silica were incorporated into PMMA. The following techniques were performed to detail the fire behaviour of the composites: mass loss cone calorimetry, pyrolysis‐combustion flow calorimetry, pyrolysis‐gas chromatography–mass spectrometry, thermogravimetric analysis, X‐ray diffraction analysis, Fourier transform infrared spectroscopy and microscopic observations. The best fire behaviour was obtained with the surface‐treated silica in the presence of AP423. The formation of a new crystalline phase from the interactions between AP423 and R805 silica and a strong barrier effect due to a layered residue were the main modes of action of this system. Moreover, we have shown that the difference between the AP423 + R805 and AP423 + A200 systems was due to poor dispersion of the silica into the PMMA matrix in the latter formulation. Copyright © 2011 John Wiley & Sons, Ltd.     

Atom transfer radical polymerization of glycidyl methacrylate followed by amination on the surface of monodispersed highly crosslinked polymer microspheres and the study of cation adsorption

The introduction of reactive groups on the surface of monodispersed highly crosslinked poly(styrene–divinylbenzene) (PSDVB) microspheres was accomplished in two steps. The first step requires immobilizing the initiating groups by a Friedel–Craft acylation between 2-chloropropionyl chlorides and the phenyl groups on the spheres. The second step requires the atom transfer radical polymerization (ATRP) of glycidyl methacrylate (GMA) to obtain spheres (PSDVB-g-PGMA) with epoxy groups on the surface. To demonstrate the feasibility of introducing functionality, the epoxy groups were ring-opened by ethylenediamines, resulting in spheres with amino functionality (PSDVB-g-PGMAEDA). The final spheres were found to have an adsorption capacity of 0.66 mmol/g in the Cu²⁺ adsorption experiments, as a preliminary application study.     

Poly(methyl methacrylate)‐grafted cellulose nanocrystals: One‐step synthesis,nanocomposite preparation,and characterization

Cellulose nanocrystals (CNCs) are ideal reinforcing agents for polymer nanocomposites because they are lightweight and nano‐sized with a large aspect ratio and high elastic modulus. To overcome the poor compatibility of hydrophilic CNCs in non‐polar composite matrices, we grafted poly(methyl methacrylate) (PMMA) from the surface of CNCs using an aqueous, one‐pot, free radical polymerization method with ceric ammonium nitrate as the initiator. The hybrid nanoparticles were characterized by CP/MAS NMR, X‐ray photoelectron spectroscopy, infrared spectroscopy, contact angle, thermogravimetric analysis, X‐ray diffraction, and atomic force microscopy. Spectroscopy demonstrates that 0.11 g/g (11 wt %) PMMA is grafted from the CNC surface, giving PMMA‐g‐CNCs, which are similar in size and crystallinity to unmodified CNCs but have an onset of thermal degradation 45 °C lower. Nanocomposites were prepared by compounding unmodified CNCs and PMMA‐g‐CNCs (0.0025–0.02 g/g (0.25–2 wt %) loading) with PMMA using melt mixing and wet ball milling. CNCs improved the performance of melt‐mixed nanocomposites at 0.02 g/g (2 wt %) loading compared to the PMMA control, while lower loadings of CNCs and all loadings of PMMA‐g‐CNCs did not. The difference in Young's modulus between unmodified CNC and polymer‐grafted CNC composites was generally insignificant. Overall, ball‐milled composites had inferior mechanical and rheological properties compared to melt‐mixed composites. Scanning electron microscopy showed aggregation in the samples with CNCs, but more pronounced aggregation with PMMA‐g‐CNCs. Despite improving interfacial compatibility between the nanoparticles and the matrix, the effect of PMMA‐g‐CNC aggregation and decreased thermal stability dominated the composite performance.     

Synthesis and characterization of diethyl-dithiocarbamic acid 2-[4-(2-diethylthiocarbamoylsulfanyl-2-phenyl-acetyl)-2,5-dioxo-piperazin-1-yl]-2-oxo-1-phenyl-ethyl ester as new reversible addition-fragmentation chain transfer agent for polymerization of ethyl methacrylate

Diethyl-dithiocarbamic acid 2-[4-(2-diethylthiocarbamoylsulfanyl-2-phenyl-acetyl)-2,5-dioxo-piperazin-1-yl]-2-oxo-1-phenyl-ethyl ester as a novel di-functional reversible addition–fragmentation chain transfer (RAFT) agent was synthesized based on 2,5-diketopiperazine. The RAFT agent was designed based on the propagating core (R group) approach and characterized by ¹H NMR, ¹³C NMR, FT-IR, elemental analysis, and melting point technique. Then, ethyl methacrylate was synthesized via free radical and RAFT polymerizations. To investigate the effect of the RAFT agent on the kinetic of polymerization, molecular weight, and polydispersity index (PDI) of polymers and also monomer conversion were monitored. Also, synthesized polymers were characterized by ¹H NMR, ¹³C NMR, FT-IR, and TGA. Characterization analyses of synthesized RAFT agent were consistent with the structure. NMR and FTIR analyses confirmed end group incorporation of RAFT agent into polymer structure. According to results, poly(ethyl methacrylate) with low PDI (1.14) was obtained. Kinetic study indicated well-controlled polymerization of ethyl methacrylate by synthesized RAFT agent. TGA results showed that RAFT agent could reduce termination reactions and so reduce head-to-head bonds and chain-end unsaturation by keeping the concentration of radicals low enough.     

Advantage of Sodium Polyoxyethylene Lauryl Ether Carboxylate as a Mild Cleansing Agent

Five anionic surfactants widely used in commercial skin cleansers were studied: sodium polyoxyethylene lauryl ether carboxylate (EC), sodium polyoxyethylene alkyl ether sulfate (ES), sodium dodecyl sulfate, potassium laurate, and N-cocoyl-l-glutamic acid monosodium salt. The amount of surfactant from aqueous solution adsorbed into the stratum corneum (SC), the degree of SC swelling, the change of the secondary structure of SC proteins (denaturation). The surface tension of surfactant–zein mixed solutions, and the solubilization behavior of zein were measured. Results showed that EC had the lowest adsorption into SC, the lowest SC swelling, and lowest denaturation of SC proteins. Low interactions between surfactants and SC proteins were also observed for EC/ES mixture solutions as well as. Mixing EC with ES good foaming performance. The EC/ES mixture, at about 1:1 ratio, is an excellent surfactant system for skin cleanser applications having cleansing characteristics and mildness to the skin.     

PVDF/PMMA共混物非等温结晶动力学和晶体结构

通过差示扫描量热仪（DSC）、X射线衍射仪（XRD）对纯聚偏氟乙烯（PVDF）和PVDF/聚甲基丙烯酸甲酯（PMMA）共混物在不同降温速率下的非等温结晶行为和晶体结构进行表征和分析,并采用Jeziorny法和莫志深法研究了各组样品的非等温结晶动力学。结果表明,PMMA含量过多（PVDF/PMMA质量比为6/4和5/5）会完全抑制PVDF结晶;对于纯PVDF和可结晶的共混物（PVDF/PMMA质量比为9/1、8/2、7/3）样品,随着PMMA含量的增加,共混物结晶温度先升高后降低,结晶速率先少许增大后减小,说明少量PMMA起异相成核作用,可促进共混物结晶,而大量PMMA可明显阻碍分子重排,抑制其结晶;PMMA的加入可促进共混物晶体结构向低维转变;共混物晶体结构主要是α晶型,PMMA含量的增加不改变共混物的晶型,且使共混物结晶度先增大后减小。     

界面增容剂的结构对PLA/PP共混体系界面状态及性能的影响

通过在聚乳酸(PLA)和聚丙烯(PP)共混体系中分别引入马来酸酐接枝乙烯-辛烯共聚物(POE-g-MAH)和甲基丙烯酸缩水甘油酯接枝乙烯-辛烯共聚物(POE-g-GMA),制备出具有不同结构及性能的共混材料(PLA/PP/POE-g-MAH,PLA/PP/POE-g-GMA),并采用转矩流变仪、扫描电子显微镜、差示扫描量热仪、平板流变仪及电子万能试验机等研究了不同界面增容剂的结构对PLA/PP共混体系界面状态及性能的影响。结果表明,POE-g-MAH和POE-g-GMA均可改善PLA与PP的相界面形态,但与POE-g-GMA相比,POE-g-MAH的界面催化效率更高,对PLA/PP共混体系增容效果更好,其可诱导PLA与PP在界面处形成微交联结构,增强PLA与PP的界面相互作用,改善材料的机械性能,当添加4wt%的POE-g-MAH时,PLA/PP/POE-g-MAH共混物的拉伸强度达29.7 MPa,断裂伸长率提升至39.3%,较PLA/PP样品提高了8倍;并且共混材料的冲击强度随着POE-g-MAH含量的增加而增加,当其添加量为6wt%时,材料冲击强度达30.1 kJ/m2,材料具有较好的刚韧平衡性。