改性玻纤增强尼龙610,1010塑料

研究了采用(准)中粘度级尼龙做基体树脂,加入成核剂改善尼龙的结晶过程,提高结晶速率和初始熔融温度;添加光、热氧稳定剂,防止尼龙在成型加工和使用过程中产生降解与老化,提高塑料制品的质量和减少性能的分散性;采用合理的工艺条件,确保添加剂的均匀分散与减少玻纤的磨损,得到适于军工、航空和机电等领域需要的高性能的受力结构工程塑料。     

Microstructure and mechanical properties of Pb-free solder alloys for low-cost electronic assembly: A review

Lead-free solders, including Sn-58Bi, Sn-52In, and Sn-3.5Ag, are potential replacements for Sn-37Pb solder in low-cost electronic assembly. This paper reviews the literature on the microstructure and mechanical properties of these alloys. Because of the processing and testing conditions, many of the data are not predictive for electronic assembly applications. However, eutectic Sn-Bi seems to have properties approaching those of eutectic Sn-Pb under most conditions, while eutectic Sn-In seems far inferior in most respects. Eutectic Sn-Ag has many promising characteristics, but its relatively high melting temperature may preclude its use for this type of application.     

Synthesis of nano particle of inorganic oxides by polymer matrix

Ultrafine (⩽ 150 nm) powders of spinels [MFe₂O₄ where M = Ni(II), Co(II) and Zn(II)]; rare-earth orthoferrites [RFeO₃ where R = Sm, Nd and Gd], and rare-earth garnets [R₃Fe₃O₁₂ where R = Sm, Nd and Gd] with good purity and chemical homogeneity were prepared through two new versatile chemical routes. The first route involved the coprecipitation of the desired metal nitrates from their aqueous solution, in presence of a water soluble polymer-polyvinyl alcohol (PVA), by triethyl ammonium carbonate solution. The other process involved complete evaporation of a mixture of optimum amounts of PVA and the desired aqueous metal nitrate solutions, with and without the addition of optimum amounts of urea when the mixture was evaporated to a pasty mass. In addition, detailed study on the reported potassium ferricyanide route was also carried out for the production of the rare-earth orthoferrite powders. The various precursor as well as the heat-treated mixed-oxide powders, prepared through each of the routes, were compared by the physical characterization studies involving thermal gravimetry and differential scanning calorimetry, infrared spectroscopy, X-ray powder diffraction, transmission electron microscopy, and room temperature magnetic measurements.     

锆钡镧铝氟化物玻璃的分相研究

本文综述了氟化物玻璃中的分相研究。在前人研究基础上应用透射电镜，X射线能谱，电子能量损失谱及X射线衍射，差热分析等研究了锆钡镧铝氟化物玻璃中的液-液分相，发现此种现象普遍存在于该类玻璃之中。对玻璃成分与分相形貌及微观结构之间的关系、对析出晶相种类及分相与析晶的相互影响进行了研究。提出欲降低氟化物玻璃的光损耗，分相与析晶一样是不容忽视的因素。     

磷酸盐玻璃中Er~(3+)离子的光跃迁和激光作用

给出了Li-Al磷酸盐玻璃中Er~(3+)离子发射特性(Ar、σ_ρ、β、τ_γ)的计算结果。报道了Cr~(3+)→Yb~(3+)→Er~(3+)的一种有效能量转移,并获得了室温下3J1.54μm波长的激光输出。     

Storage stability of a high protein food beverage powder prepared from the Nigerian ‘red skin’ groundnut (Arachis hypogaea) protein concentrates

A high protein, groundnut-based powder reconstitutable into a milk-like beverage was packed in polyethylene bags and in lacquered tin cans, and stored at both room temperature (25 ± 2°C) and in a domestic refrigerator (5 ± 2°C) for 60 days. Storage stability was evaluated by analysing periodically for changes in physical characteristics, proximate composition, and development of browning and rancidity, and assessing moisture sorption characteristics. Protein, lipid, total soluble sugars, peroxide value, total carbonyls and extinction values of the ethanolic extract remained practically constant during storage. The isotherm curves exhibited the characteristic sigmoidal shape typical of high protein foods. There was a greater increase in density, hygroscopicity and wettability in polyethylene-packed samples at both temperatures suggesting that the lacquered tin can leads to better keeping quality for this product.     

Acoustic study of nano-crystal embedded PbO-P2O5 glass

Nano-crystal embedded PbO-P₂O₅ glass has been prepared and characterized by XRD and TEM measurements. The ultrasonic velocity and attenuation measured within the temperature range 80–300 K show significant structure and interesting feature with the presence of nano-crystalline region. The glass samples were prepared by melt-quench method and nano-crystals of different sizes were produced by heat treatment of the glasses for different durations of heating. All the processes were carried out at or above glass transition temperature. A theoretical model that takes account of the effects of thermally activated relaxation, anharmonicity as well as microscopic elastic inhomogeneities arising out of fluctuations has been successfully applied to interpret the variation of ultrasonic velocity and attenuation data. An interesting outcome of this application has been to propose a method for the determination of the size of nano-crystals from the ultrasonic attenuation data.     

Kinetics of AuSn4 migration in lead-free solders

The relatively fast diffusion of Au atoms in eutectic PbSn matrix is considered one of the contributing factors to the Au embrittlement problem. In this study, we further investigated the Au embrittlement problem in high-Sn solders. Experimentally, Sn3.5Ag (wt.%) spheres with 500-μm diameter were soldered over the Au/Ni soldering pads. It was found that some of the AuSn₄ needles that formed after reflow inside the solder migrated back to the solder/pad interface during thermal aging. However, the migration kinetics in high-Sn solders was slower compared to that in eutectic PbSn. The difference in migration kinetics of AuSn₄ in eutectic PbSn and SnAg was ascribed to the difference in the magnitudes of the Au flux and the Ni flux. In eutectic PbSn, the Au flux was much greater than that of the Ni flux, and the Au and Ni flux were in the same order of magnitude in eutectic SnAg. The relative magnitude of the Au and Ni flux changed in eutectic PbSn and SnAg because the homologous temperatures of PbSn and SnAg were different.     

Nanocrystalline orthoferrite powders: Synthesis and magnetic properties

Nanocrystalline orthoferrite powders were synthesised at low temperatures by employing an aqueous sol–gel process. Colloidal sols and water re-dispersible gels of orthoferrite precursors were prepared by room-temperature processing of inexpensive metal salts. The average diameter (Z_av) of the precursor particles was in the size range from 4 to 7 nm; the diameters had a narrow size distribution. Water re-dispersible translucent gel monoliths were obtained by concentrating the aqueous sols followed by drying them under reduced pressure (10⁻² Torr) at room temperature. The sol–gel transition was found to be completely reversible. Nanocrystalline fine powders of orthoferrites of general formula, LnFeO₃ (Ln = La, Sm, Gd, Dy, Er, Yb and Y) having a crystallite size of about 25 nm were prepared by heating the gel precursors at 650–700 °C in air. Powder X-ray diffraction and thermogravimetry, respectively, were employed to identify perovskite phase formation and delineate thermal events that lead to gel to crystallite conversion. Magnetic measurements were carried out on the resultant powders at room temperature and down to 40 K. Nanocrystalline orthoferrite powders exhibited weak ferromagnetic behaviour, and reduced magnetic moments.     

Role of Specimen Geometry in the Effect of Fiber Orientation on the Thermal Conductivity of a Uniaxial Carbon-Fiber-Reinforced Aluminoborosilicate Glass-Matrix Composite

A study concerning the effect of fiber orientation on the thermal conductivity of a uniaxial carbon-fiber-reinforced borosilicate glass was conducted. For thin specimens, and thick specimens with specimen sides cut parallel to the fiber direction, the dependence of thermal conductivity on fiber orientation showed excellent agreement with theoretical behavior predicted for a composite infinite in extent. In contrast, the thermal conductivity data for rectangular thick specimens fell well below the data for the thin and angled specimens. For fiber orientation of 45° and higher, at which the heat was directed toward the side of the specimen rather than across, the thermal conductivity values showed excellent agreement with theoretical behavior predicted for a finite composite strip with insulated sides.