SAPO-34/SiO_2催化甲醇制烯烃

采用水热法合成了SAPO-34分子筛,并用X射线粉末衍射仪和扫描电子显微镜对SAPO-34分子筛的结构进行了表征,同时探讨了黏合剂种类、甲醇分压、催化剂粒径和硅源等对SAPO-34分子筛催化甲醇制烯烃(MTO)反应性能的影响。实验结果表明,在MTO反应中,三烯(乙烯、丙烯和丁烯)选择性在反应初期存在明显的诱导期;以S iO2为黏合剂合成的SAPO-34/S iO2催化剂不但可缩短MTO反应的诱导期,三烯选择性也较未添加黏合剂或以A l2O3为黏合剂时高1~2个百分点;且当催化剂活性明显下降时,三烯选择性下降的幅度较小。催化剂粒径、甲醇分压及硅源对催化剂的诱导期也有明显的作用。在甲醇分压低于19kPa、催化剂粒径0.25~0.38mm、S iO2为黏合剂、硅酸四乙酯为硅源时,SAPO-34/S iO2催化剂的MTO性能明显提高。     

三脉冲不等强度激光片光源的研制及应用

本文报道了最近研制成功三脉冲不等强度调Q红宝石激光片光源系统.利用小颗粒对片光源90°方向的散射光对动态颗粒场进行高速摄影,从底片中能够精确直观地判断微小颗粒的瞬时分布、运动方向、速度和加速度情况.     

不同光强下太阳电池组件曲线因数的研究

通过测试太阳电池组件在不同入射光强下的电性能参数，采用作拟合曲线的方法求解不同光强下太阳电池组件的曲线因数，并在此基础上分析组件曲线因数与入射光强的关系。     

遵义后坝奥陶系红花园组油苗岩石轻烃特征分析

遵义后坝奥陶系红花园组生物碎屑灰岩中发现油苗和沥青,经过气/源岩、沥青/源岩对比,震旦、寒武及奥陶系产层轻烃C₆₊₇结构组成基本一致,奥陶系含油苗灰岩轻烃星图与震旦系泥岩、寒武系沥青砂岩星图较为相似,显示红花园组油苗主要来源于震旦系和下古生界过成熟或高成熟海相烃源岩,油气经历了较长距离的运移,得以在奥陶系中保存下来。这对评价该地区油气前景有重要意义,预示着可能存在一套特殊的含油气组合,存在以O₁h古风化壳储集层为目的层的勘探领域。在兴文—叙永一线以西地区现今下古生界储盖组合保存良好,在适当的构造圈闭中可形成油气藏。志留系和二叠系产层轻烃C₆₊₇与震旦系、寒武系及奥陶系等产层轻烃C₆₊₇明显有别,星图对比性差,表征它们之间成烃母质或沉积环境均有不同。      

用傅里叶变换计算单缝衍射的光强分布

现代光学和通讯理论由于引入了傅里叶变换的方法，使计算光学系统和通讯系统的物像的对应关系简洁、清晰。该文用傅氏变换计算长为２ａ、照度为Ａ的均匀缝光源在观察面上的光强分布为Ｉ（ｘ）＝│Ｅ（ｘ）│＾２＝ＡＡ＾２ａ＾２（ｓｉｎ２πｆａ／２πｆａ）此方法也可运用于矩形孔、圆孔等。     

Solubilization of unilamellar liposomes by betaine-type zwitterionic/anionic surfactant systems

The mechanisms governing the solubilizing interactions between zwitterionic/anionic mixed surfactant systems at different molar fractions of the zwitterionic surfactant (X_zwitter) and neutral or electrically charged unilamellar liposomes were investigated. The mixed systems were formed by N-dodecyl-N,N-dimethylbetaine and sodium dodecyl sulfate in the presence of piperazine-1,4-bis-(2-ethanesulfonic acid) buffer at pH 7.20. Unilamellar liposomes formed by egg phosphatidylcholine, in some cases together with stearylamine or phosphatidic acid, were used. Solubilization was detected as a decrease in static light-scattering of liposomes. Two parameters were regarded as corresponding to the effective surfactant/lipid molar ratios (Re) at which the surfactant system (i) saturated the liposomes, Re_sat, and (ii) led to a total solubilization of liposomes, Re_sol. From these parameters the bilayer/aqueous medium surfactant partition coefficients for the saturation (K_sat) and complete bilayer solubilization (K_sol) were determined. When X_zwitter was 0.40, The Re and K parameters showed a maximum, whereas the critical micellar concentration (CMC) of these systems exhibited a minimum, regardless of the electrical charge of bilayers. Given that the ability of the surfactant systems to saturate or solubilize liposomes is inversely related to the Re_sat and Re_sol parameters, these capacities appear to be directly correlated with the CMC of the mixed systems. The similarity of both K_sat and K_sol (particularly for X_zwitter=0.2–0.8) suggests that a similar partition equilibrium governs both the saturation and the complete solubilization of bilayers, the free surfactant concentration (S_a,S_b), remaining almost constant with similar values to the CMC for each mixed system studied.     

A study of the static and dynamic properties of side-chain liquid crystalline polymers in low molar mass mesogens

The static and dynamic properties of solutions of a side chain polysiloxane liquid crystal polymer have been studied in a cyanobiphenyl nematic host as a function of concentration and temperature. Refractive index measurements were carried out on aligned samples and the data used to determine the macroscopic order parameter, S, using Haller's method. Photon correlation spectroscopy has been used to measure ($\text{k}{}_{22}\text{γ}{}_1$) for the pure nematic solvent and the solutions. From these measurements it appears that the static properties vary slowly and linearly with increasing polymer concentration whilst the dynamic or viscoelastic properties change markedly. This change has been attributed to γ₁, the twist viscosity, and the results have been discussed in terms of the function of the siloxane polymer backbone.     

奇、偶相干热态中的光场统计性质

本文讨论了热混饨光场态参与时对奇、偶相干态的光场统计性质影响。结果表明，热光场态的存在使偶相干态的压缩效应和奇相干态中的反聚束效应减弱。     

散射式浊度测量仪

浊度是一项评定水质的重要技术指标。如何提高测量浊度的精度是国内外一直在研究的问题之一。文章介绍了作者在散射式浊度测量仪设计过程中，为提高浊度的测量精度和稳定性所做的工作。在测量仪的部件（光学系统，电路系统等）设计中，采取了许多特殊方法，使浊度测量的各项精度指标都得到了较大的提高。