Viscosities of nonelectrolyte liquid mixtures. III. Selected binary and quaternary mixtures

This paper is the final in a series of three viscosity and density studies of pure n-alkanes and selected binary and quaternary mixtures. A standard U-tube viscometer was used for viscosity measurements, and a Pyrex flask-type pycnometer was used for density determinations. Results are given here for pure alkane and selected binary mixtures of n-tetradecane + n-octane, for selected quaternary mixtures of n-hexadecane + n-dodecane + n-decane + n-hexane, and for pure and selected quaternary mixtures of n-hexadecane + n-dodecane + n-nonane + n-heptane at 303.16 and 308.16 K. The principle of congruence was tested, as was the Grunberg and Nissan equation, as they have been shown to be useful as prediction techniques for other n-alkane binary mixtures. Comparisons were made between the two groups of quaternary alkane mixtures and the binary n-tetradecane + n-octane mixtures of the same pseudo composition to understand better the dependence of mixture viscosities on the composition parameter.     

A new microsecond pulse-heating system to investigate thermophysical properties of solid and liquid metals

A new discharge system for resistive self-heating has been constructed for the measurement of accurate thermophysical properties. A constant-current pulse is used to heat metals over a time interval of 50 to 100 s, reaching temperatures up to the boiling point. New techniques have been developed to obtain sound speeds in the pulse-heated sample, emissivities, and vapor pressure. A new pyrometer allows the extension of the measured temperature range down to the melting point of copper.     

STUDY ON THE VARIATION MECHANISM OF CARBON CONTENT OF LIQUID IRON IN MELTING GASIFIER

This paper studied the changing principles of carbon content in direct reduction iron (DRI) and liquid iron in the COREX melting gasifier. Under the normal working conditions of experimental equipment, liquid nitrogen was poured into the melting gasifier from its tuyere to cool down quickly. And then seven cross sections were made to study the carburization reaction and its characteristics of the solid iron and the liquid iron, and also the reaction of carbon between the slag and the metal. According to the results, the influences of the thickness of the semi-coke layer and the temperature on the carbon content of liquid iron in the COREX melting gasifier were confirmed.     

高效焊管新工艺——金属管液相扩散焊

采用镍基非晶态箔带作中间层,在加压情况下(约几MPa)使之熔化、保温,进行了钢管瞬间液相 (TLP)扩散焊试验。结果表明,可以获得无夹杂的致密界面;接头过渡区的最终厚度显著变薄;焊后中间层主组元由焊前的Ni变为Fe;容易获得性能合格接头。值得指出的是,焊接时间约为3min,远低于手弧焊所需时间。     

室温下ZnO超疏水表面的制备及油水分离性能

利用简便的液相法,在室温下于不锈钢网上沉积ZnO纳米片和纳米花粗糙结构,接着通过浸渍法修饰低表面能物质硬脂酸,制备了超疏水不锈钢网。对沉积后的不锈钢网表面形貌、晶体结构、润湿性能、耐磨性能、油水分离性能等进行表征与测定。结果表明,该不锈钢网表面由纳米片和纳米花组成的微纳米结构ZnO构成,具有超疏水性,水接触角161 °;油水分离效率达98%,循环使用20次后分离效率仍保持在95.5%以上;具有良好的机械耐磨性,在高盐环境中表现出化学稳定性。     

Fabrication of High Performance PET/TLCP Fibers through the Synergistic Interfacial Enhancement and Compatibilization of Functional 1D and 2D Carbon Nanomaterials

The maleic anhydride functionalized graphene oxide (GO-MA) is fabricated by an efficient and solvent-free Diels–Alder reaction. Polyethylene terephthalate (PET)/thermotropic liquid crystal polyester (TLCP), PET/TLCP/GO-MA, PET/TLCP/aminated multi-walled carbon nanotubes (MWCNTs-NH₂), and PET/TLCP/GO-MA/MWCNTs-NH₂ composite fibers are systematically melt-spun. The structure and compatibilizing effects of GO-MA and MWCNTs-NH₂ on the mechanical, thermal, and crystallization properties of the composite fibers are indicated. The non-isothermal crystallization kinetics and X-ray diffraction (XRD) data show that TLCP and nanofillers can change the crystalline morphology of PET. The mechanical properties of the fibers rise with increasing TLCP content. The tensile strength 929 MPa and modulus 17.5 GPa of the fibers with 7 wt% TLCP and 0.25 wt% nanofillers (0.1 wt% GO-MA and 0.15 wt% MWCNTs-NH₂) are significantly higher than those with 7 wt% TLCP (tensile strength 622 MPa and modulus 16.1 GPa) and even higher than those with 15% TLCP (tensile strength 836 MPa, and modulus 18.0 GPa). When the GO-MA and MWCNTs-NH₂ co-exist, the anti-dripping phenomenon is improved. Therefore, the TLCP, GO, and MWCNTs synergistically strengthens the mechanical properties. This is promising for the industrial fabrication of high-strength fibers.     

Controllable synthesis of pure monodispersed zirconia nanopowders with tetragonal phase

Nanopowders of pure zirconia have been synthesized using citric acid (CA)-assisted lamellar liquid crystal template method. The microstructure of the zirconia powder prepared at the different mole ratios of CA to zirconium oxynitrate (ZN) was characterized by FT-IR, X-ray diffraction (XRD), laser particle size analyzer, Raman spectroscopy, and scanning electron microscope (SEM) methods. The phase structure of the sodium dodecyl sulfate (SDS)/C₁₀H₂₁OH/H₂O system before and after adding mixing solution CA and ZN was determined by POM (Polarizing Optical Microscope). The results show that lamellar structure of the SDS/C₁₀H₂₁OH/H₂O system after adding mixing solution CA and ZN is stable. The presence of CA inhibits agglomeration and growth of zirconia particle. The crystallite size of zirconia powders decreases and agglomerates lowly with addition of CA. Fourier transform infrared spectrometry (FI-IR) analyses reveal that the structure of chelating organic complex is maintained in zirconia structure at high-temperature calcination to cause oxygen vacancies which stabilizes the tetragonal phase of zirconia. The zirconia powders remained the single metastable tetragonal phase at the molar ratios of CA to ZN ranging from 1:3 to 5:1. The crystallite size of zirconia with spherical morphology varied from 32.2 to 20.1 nm with the increase of the molar ratio of CA to ZN in the range of 1:3 to 5:1.     

SiC FIBER／ALUMINIUM PREFORM WIRES FABRICATEDBY ULTRASONIC LIQUID INFILTRATION PROCESS

ＳｉＣＦＩＢＥＲ／ＡＬＵＭＩＮＩＵＭＰＲＥＦＯＲＭＷＩＲＥＳＦＡＢＲＩＣＡＴＥＤＢＹＵＬＴＲＡＳＯＮＩＣＬＩＱＵＩＤＩＮＦＩＬＴＲＡＴＩＯＮＰＲＯＣＥＳＳＺｈａｎｇＣｈｅｎｇｅ；ＷａｎｇＬｉｎｇｓｅｎ（ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆ...     

Ce对过共晶Al—Si合金熔体粘滞性和结构的影响

研究了Ce对Al—16％Si合金熔体粘滞性的影响。结果表明：Ce的加入增加了合金熔体的粘度，且随着Ce含量的增加粘度值也增加。结合加入Ce的Al—16％Si合金氢含量的变化、凝固组织和DSC曲线研究了熔体结构的变化，分析了粘度与液态结构变化之间的关系。     

液膜法分离富集,测定水中微量锶

用乳状液膜体系对锶进行分离富集，该体系包括协同流动载体（ＰＭＢＰ，ＴＢＰ），表面活性剂（ＳＰＡＮ８０）增强剂（丙三醇）溶剂（正己烷）和内相（１．２ｍｏｌ／Ｌ的盐酸溶液），实验表明，在适宜的条件下，锶的富集效率可达９９．５％以上，而在此条件下许多共存离子，如Ｆｅ＾３＋，Ａｌ＾３＋，Ｃａ＾２＋，Ｍｇ＾２＋，Ｂａ＾２＋，Ｃｒ＾３＋，ＣＯ＾２＋，Ｎｉ＾２＋，Ｚｒ＾４＋，Ｃｕ＾２＋，Ｚｎ＾２＋，Ｐｂ＾２＋和