Effect of spray nozzle design on liquid-solid contact in fluidized beds

In industrial fluid cokers the feedstock, consisting of heavy bituminous hydrocarbons, is atomized with steam and injected into a hot fluidized bed of coke. Good and uniform contact of the liquid droplets with the solid particles is required to provide heat for the cracking reactions while minimizing mass transfer effects. Experiments in a pilot plant coker have suggested that the initial particle/liquid mixing, in the spray jet, is rather poor. Experiments in a X-ray scanner showed that liquid droplets and entrained particles accumulate just below the tip of the jet plume to form agglomerates.An experimental technique was used to quantitatively determine the quality of mixing with a variety of nozzle configurations including several novel designs. By improving spray stability, redistributing liquid droplets to the solids-rich region of the jet and increasing the surface area of the gas-liquid jet-fluidized bed interface, liquid/solid contact is improved.     

Viscoelastic properties of polyarylene ether nitriles/thermotropic liquid crystalline polymer blend

Polyarylene ether nitriles (PEN)/thermotropic liquid crystalline polymer (TLCP) blend was prepared via melt mixing. The immiscible phase morphologies, linear and nonlinear, as well as transient viscoelastic properties of the blend were studied using SEM, rheometer, and DMA. The linear dynamic viscoelastic behavior of the blend shows temperature dependence due to further evolution of the immiscible morphology and, as a result, the principle of time‐temperature superposition (TTS) is invalid. In the steady shear flow, the discrete TLCP phase is difficult to be broken up because of the high viscosity ratio of the blend systems, while is easy to be coarsened and followed by elongation, and finally, to form fibrous morphology at high TLCP content and high shear level. During this morphological evolution process, the transient stress response presents step increase and nonzero residual relaxation behavior, leading to increase of the dynamic viscoelastic responses after steady preshear. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Semiflexible random thermotropic copolymers from 8‐(3‐hydroxy phenyl) octanoic acid and 3‐chloro‐4‐hydroxy benzoic acid/3,5‐dibromo‐4‐hydroxy benzoic acid

Two series of semiflexible random thermotropic copolymers containing 8‐(3‐hydroxy phenyl) octanoic acid (HPOA) with either 3‐chloro‐4‐hydroxy benzoic acid or 3,5‐dibromo‐4‐hydroxy benzoic acid were prepared by melt polycondensation techniques. The copolyesters were characterized with Fourier transform infrared spectroscopy, dilute solution viscometry, hot‐stage polarized light microscopy, differential scanning calorimetry, thermogravimetric analysis, and wide‐angle X‐ray diffraction. Studies revealed that the amount of HPOA as a disruptor incorporated into the backbone of substituted 4‐hydroxy benzoic acids had a detrimental effect on the liquid‐crystalline behavior. Mesophase‐transition temperatures were observed between 210 and 250°C, and the optical textures were of typical nematic phases. The degree of crystallinity decreased with an increase in the HPOA content. The thermal stability of the copolymers was in the range of 310–370°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

复合地基的沉降计算方法

水泥土搅拌桩复合地基的设计可用其沉降进行控制。本文列举了目前比较常见的几种沉降计算方法，综合这些方法，提出了以沉降进行控制的设计思路，并结合这几种计算方法的计算模型或原理，提出在工程计算中注意的问题，进而对工程实用性及经济性进行了一些尝试性的探讨。     

物质平衡法测油井液面

物质平衡法通过测试环空中的气体排量折算出真实的环空液面，可以克服双频道回声仪所遇到的困难，为分析泵效、折算地层压力及区块注水补充地层能量提供依据。中原油田采油二厂研制的拟液面测试仪既能用于有泡沫段的油井，又可用于无泡沫段的油井，对于井深超过2500m的油井更适宜。     

Study of Liquid Phase Shifter for ICRF on EAST

A method of current drive with Ion Cyclotron Range of Frequency （ICRF） on Experimental Advanced Superconducting Tokomak （EAST） is described. A variety of liquid silicon oil heights in the phase shifter will bring the phase difference to the current drive. It is found that the current drive can be achieved by using the phase shifter. The liquid phase shifter is one of the impedance matching systems too.     

液碱纯度对阴床再生运行情况分析

从理论上分析了液碱对阴树脂再生度的影响。通过两种不同纯度的液碱再生阴树脂的实际运行经济指标统计分析，说明用高纯度液碱再生阴树脂，可提高树脂的工作交换容量和周期制水量，有很好的经济效益。     

Computations of Explosive Boiling in Microgravity

Dynamics of the explosive growth of a vapor bubble in microgravity is investigated by direct numerical simulation. A front tracking/finite difference technique is used to solve for the velocity and the temperature field in both phases and to account for inertia, viscosity, and surface deformation. The method is validated by comparison of the numerical results with the available analytical formulations such as the evaporation of a one-dimensional liquid/vapor interface, frequency of oscillations of capillary waves, and other numerical results. Evolution of a three-dimensional vapor nucleus during explosive boiling is followed and a fine scale structure similar to experimental results is observed. Two-dimensional simulations yield a similar qualitative instability growth.     

卧式旋转筒体内液体稳定运动的试验研究

采用因次分析法确定了卧式旋转筒体内液体稳定运动的准则数,并通过试验研究了筒体内液环形成与破坏等稳定运动的临界转速、主要准则数间的函数关系。研究表明:形成液环的临界转速ωc主要取决于筒体内径R、液环的厚度h、密度ρ、粘度μ以及重力加速度g;而液环破坏的临界转速ωd主要取决于R、g。     

高压下CO在甲醇-碳酸二甲酯中的溶解度测定

利用自行建立的高压下测定气体在液体中溶解度的装置,在温度25~75℃、压力2.00~10.00MPa条件下,首次测定了CO在甲醇、碳酸二甲酯及甲醇-碳酸二甲酯混合体系中的溶解度,并用PR方程计算了CO的气相逸度,溶解度数据符合方程f=Hx。揭示了CO在甲醇、碳酸二甲酯及甲醇-碳酸二甲酯混合体系中的溶解度规律。将亨利系数和温度进行关联,关联误差很小。这表明用此关联式可预测和推算CO在这些溶剂中的溶解度。