Effect of MoS2 morphology on the HDS activity of hydrotreating catalysts

We have applied near-edge X-ray absorption fine structure (NEXAFS) to characterize the surface and bulk properties of Li_xNi_1–xO catalysts. In our experimental set-up, NEXAFS spectra of powder materials could be obtained by measuring the intensity of either electron-yield or fluorescence-yield. While the electron-yield method is sensitive only to the top few atomic layers, the fluorescence-yield method can detect species up to a few thousands angstroms deep into the bulk structure. The ability to distinguish surface and bulk compositions is demonstrated in studies of a number of Li_0.5Ni_0.5O samples, of which the surface compositions vary as a function of preparation procedures. In addition, NEXAFS investigations following the reaction of Li_xNi_1–xO with CH₄ have also been carried out and the results indicate that the initial surface reaction intermediates are Li₂CO₃.     

由二氧化碳出发合成有机碳酸酯

对以二氧化碳为原料合成有机碳酸酯的环氧路线、酯交换和直接合成方法作了综合评述 ,认为直接合成是最佳的合成路线。碳酸酯的直接合成可在均相及多相催化体系中进行 ,负载金属、金属甲氧基化合物及碱均可作为催化剂。直接法研究的关键在于高性能催化剂的开发、由二氧化碳对金属 -氧键插入反应导致的催化循环的构筑及耦合反应的应用。     

纳米碳酸钙/炭黑并用对丁苯橡胶性能的影响

研究了纳米碳酸钙／N330炭黑并用比对丁苯橡胶性能的影响。结果表明，随着CaCO3／N330并用比的改变，材料的强度有了显著的提高，特别是CaCOa／N330并用比为20／30(质量份)时复合材料的拉伸强度达到了20MPa以上，同时材料具有较好的弹性和较低的硬度；两种处理剂相比，树脂酸处理的碳酸钙具有较好的性能；表面处理的纳米炭酸钙与炭黑并用，可以降低炭黑填充橡胶的动态滞后，表面处理的纳米碳酸钙的加工性能比纳米炭黑好，可以通过并用纳米碳酸钙来改善炭黑胶料的加工性能。     

稀土复合热稳定剂对聚氯乙烯性能影响研究

主要以有机锡热稳定剂为对比物，研究了稀土热稳定剂对聚氯乙烯(PVC)的热稳定性及其他性能的影响。稀土热稳定剂对PVC的力学性能、加工性能都有不同程度的提高，稀土热稳定剂的热稳定性能符合PVC的加工条件要求，并研究了抗冲改性剂ACR(丙烯酸酯共聚物)对体系的影响。     

Nucleation and crystallization of polypropylene by mineral fillers: relationship to impact strength

The mechanical properties of mineral-filled polypropylene (PP) are determined not only by the size, shape and modulus of the filler particles, but also by microstructure. For example, poor impact strength is correlated with a high capacity for nucleation of crystallization. In the present study, optical microscopy has been used to measure the growth rate of spherulites in PP. In tandem with this, isothermal d.s.c. measurements have been made of the crystallization of the PP filled with talc, calcium carbonate and stearate-coated carbonate at different loading levels. Computer simulation of spherulite growth has been used to derive the number of nucleating sites per unit volume of polymer and, using surface area measurements, the number of sites per unit area of mineral surface was obtained. Values for talc were, as expected, considerably higher than those for carbonate (and especially coated carbonate) fillers. The presence of filler affects not only the nucleation and kinetics of the crystallization process but also the crystallinity and orientation indices and the proportion of β-phase crystallites present. The connection between these factors and impact strength is discussed. It is concluded that impact properties are determined by inter alia crack pinning and blocking by filler particles, stress concentrations at the edges of the filler particles, and the nucleating ability of the filler.     

碱式碳酸铅的生产工艺研究

介绍了由氧化铅与冰醋酸在一定温度下反应生成碱式醋酸铅，碱式醋酸铅在一定条件下与二氧化碳反应生成碱式碳酸铅，再经沉淀、抽滤，制得结晶产品。探讨了溶液pH、反应温度、二氧化碳流量、水中的杂质、总铅质量分数等对碱式碳酸铅结晶的影响，得出了制备碱式碳酸铅的最佳工艺条件：pH=6．5时停止通入二氧化碳，反应温度25～30℃，二氧化碳流量控制在0．5～3L／min，把河水或自来水经过离子交换处理，溶液中总铅质量分数控制在2％～5％。     

废旧电池中有价金属回收利用探讨

随着中国经济的稳步发展和投资环境的不断优化,中国已成为电池的制造和消费大国,每年产生数亿只废旧电池。对废旧电池的回收利用已成为全社会关注的问题。介绍了废旧电池中有价金属的回收利用方法,着重介绍了锂离子二次电池正极材料有价金属的回收利用方法。指出,中国商品化的正极材料只有钴酸锂（LiCoO2）,这种正极材料钴含量高,且钴价值高,并且回收工艺可行,因此,从钴酸锂正极材料中回收钴等有价金属,对发展中国的循环经济具有重要意义。同时介绍了锂离子二次电池正极材料的研究现状。     

纳米碳酸钙在涂料中的应用研究

探究纳米碳酸钙先在溶剂中分散再与树脂进行调配的方法。利用正交设计法对其中高速搅拌法进行优惠条件实验，发现搅拌时间并非越长越好，优惠条件下涂料中纳米碳酸钙分散到原始粒径，涂料质量有较大提高。     

3,5-二羟基苯甲醇的简便合成方法

以３，５ 二羟基苯甲酸为原料，经酯化、酰化、硼氢化锂还原等改进步骤合成了３，５ 二羟基苯甲醇，总收率达７５％，提供了一条较为简便的适合于工业化生产的合成方法。     

高纯纳米碳酸锶干燥设备的选型和使用

微波干燥器用于干燥高纯纳米碳酸锶,其热效率比传统干燥方法提高5%～10%,可达80%以上,生产环境大大改善,提高了碳酸锶的干燥技术水平。