Electron-Impact Cross Sections for Dipole- and Spin-Allowed Excitations of Hydrogen,Helium, and Lithium

Electron-impact excitation cross sections are presented for the dipole- and spin allowed transitions from the ground states to the np ²P states for hydrogen and lithium, and to the 1snp ¹P states for helium, n = 2 through 10. Two scaling formulas developed earlier by Kim [Phys. Rev. A 64, 032713 (2001)] for plane-wave Born cross sections are used. The scaled Born cross sections are in excellent agreement with available theoretical and experimental data.     

硼酸使掺铁铝酸锂发光增强的现象

在硼酸存在下合成了掺铁铝酸锂荧光体,研究了在不同温度下硼酸加入量对荧光体发光强度的影响,并通过X射线粉末衍射和粒度分析,初步探讨了发光增加的原因。     

The thermodynamic performance of a new solution cycle in double absorption heat transformer using water/lithium bromide as the working fluids

In this paper, a new solution cycle in the double absorption heat transformer is presented and the thermodynamic performance of this new cycle is simulated based on the thermodynamic properties of aqueous solution of lithium bromide. The results show that this new cycle is superior to the cycle being studied by some researchers. This new solution cycle has a wider range of operation in which the system maintains the high value of COP and has larger temperature lifts and operation stability. The relationship between the absorber and the absorbing evaporator is more independent and this makes the operation and control of the system more easier.     

Ethynedithiol‐based polyeneoligosulfides as active cathode materials for lithium‐sulfur batteries

Ethynedithiol‐based polyeneoligosulfides have been synthesized in 96% yield by the reaction of sodium acetylides (HC?CNa, NaC?CSNa) and elemental sulfur through the Na? C_sp bond in liquid ammonia with the following spontaneous polymerization of ethynedithiols (HSC?CSH) formed by the hydrolysis. The polyeneoligosulfides synthesized are brown powders (up to 77% sulfur content, mp 128–184°C), partially soluble in organic solvents. They are high‐resistance semiconductors (10^?13 to 10^?14 S cm^?1), possess paramagnetic (10¹⁷ to 10¹⁸ spin g^?1) and redox properties. The oligosulfides obtained, being redox systems capable of reversible redox processes, provide high values of discharge capacity (345–720 mA h g^?1) of rechargeable lithium‐sulfur batteries. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of Li+ ions on structure,properties, and actuation of cellulose electro‐active paper actuator

We have reported an electro‐active paper actuator from regenerated cellulose. After dissolving cellulose fibers with a solution of lithium chloride in N,N‐dimethylacetamide, cellulose was regenerated by combining distillation of cellulose solution along with washing with the mixture of deionized water, isopropyl alcohol, and running water. However, the effect of Li⁺ ions on structure, properties, and the actuation behavior of the actuator was not studied. This article describes the changes in these parameters when the Li⁺ ions are removed by subjecting it to different running water exposure time. The structure and properties of cellulose electro‐active paper and its actuation behavior were studied. As Li⁺ ions content reduced from 4354.17 to 10.26 ppm by increasing the exposure time of running water, crystallinity, Young's modulus, and bending displacement decreased. Details about the investigation have been explained. This elimination of ions is important to increase the piezoelectric effect in EAPap by decreasing the ion migration effect. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

聚氧乙烯 - 聚氧丙烯 - 聚苯乙烯多嵌段聚合物的力学和导电性能研究

研究了聚苯乙烯含量对聚氧乙烯－聚氧丙烯－聚苯乙烯多嵌段聚合物的力学性能及其与ＬｉＣｌＯ４络合物的离子导电性能的影响；并以电导率较高的络合物为电解质，Ｎａ１＋ｘＶ３Ｏ８复合物和Ｌｉ片分别为正、负极组装了薄型锂电池并测定其放电性能。     

LiMn2O4纳米粉的湿化学合成与表征

采用湿化学方法，通过水溶液中的化学反应直接合成纳米级LiMn2O4化合物，其结构基本上为无定型，但XRD图谱中已出现LiMn2O4特征峰，说明在水溶液中已初步形成尖晶石结构，运用XRD，SEM，TG－DTA等现代检测手段对样品的性能进行进行了表征，XRD及SEM等分析结果表明，合成样品经简单热处理后，晶型结构完善，形貌规整，均匀，比表面积积显著减小，粒度明显变粗。TG－DTA热分析证明，样品在低于900℃的温度下进行热处理时，仅发生LiMn2O4的晶化过程，产物的化学组成稳定，该法合成锂离子电池正极材料LiMn2O4，具有工艺流程简单，产物的成分，结构及粒度均匀等特点。     

碱-碳酸盐反应热力学讨论

应用热力学方法探讨了温度对碱 碳酸盐反应的影响 ,反应温度升高时 ,反应的推动力减弱。对碱与碳酸盐发生反应生成沉淀时所需碱的浓度以及温度的影响进行了讨论。 2 98K ,pH≥ 10 .6时 ,碱 碳酸盐反应能发生 ,反应温度升高 ,碱 碳酸盐反应所需碱的浓度相应增大。对氢氧化锂与碳酸盐反应可能生成碳酸锂沉淀时溶液的碱的浓度作了计算 ,2 98K ,pH≥ 13.1时 ,氢氧化锂与碳酸盐反应除生成水镁石和方解石外还能生成碳酸锂沉淀 ,反应温度升高时 ,反应生成碳酸锂沉淀所需碱的浓度变化不大     

Na+掺杂对LiNi1/3Co1/3Mn1/3O2结构和电化学性质的影响

采用高温固相法成功制备了不同Na+掺杂浓度的Li_1-xNa_xNi_1/3Co_1/3Mn_1/3O₂锂离子电池正极材料,探究了Na元素掺杂对层状氧化物正极材料结构以及电化学性能的影响。通过X射线粉末衍射仪和扫描电子显微镜表征了材料的结构和形貌,结果表明,当x≤0.3时,样品不会出现其它杂相;当x＞0.3时,样品中会出现NaNi_1/3Co_1/3Mn_1/3O₂的杂相。同时随着掺杂浓度的增加,样品的阳离子混排度逐渐增加。电化学性能结果表明,少量Na+的掺入可以提高LiNi_1/3Co_1/3Mn_1/3O₂在0.2C,0.5C下的放电比容量并增强其循环稳定性,但会损坏材料的倍率性能。     

多级结构MoS2/C复合材料的储锂性能

利用二硫化钼和葡萄糖为原料,采用一锅乙醇/水复合溶剂热-后热处理法制备了绣球花状结构MoS₂/C复合材料。考查了乙醇/水复合溶剂的合理组成和MoS₂/C复合材料中碳的合理含量,分别采用SEM和TEM表征了MoS₂/C材料的形貌结构,通过TGA测试和计算了材料中的碳含量。采用循环伏安、恒流充放电和交流阻抗等测试了MoS₂/C复合电极的电化学性能。结果表明,MoS₂/C复合材料拥有多级花球状结构,缓解了MoS₂的团聚,使电极材料的利用率和电化学稳定性显著提高。当V（乙醇）：V（水）为1：2,碳含量为50%时,MoS₂/C复合电极在200 mA·g^-1的电流密度下,充放电循环100次后,可逆容量达到762 mA·h·g^-1。