水上地震折射互换法误差分析

在理论上，用源检互换的方法进行折射地震勘探是没有误差的，在某些特殊条件下无法铺设检波器而又必须进行折射地震勘探时它也是唯一的选择，然而，在实际工作中，由于各种因素的影响，其误差是不可忽略的。为此，本文从地震折射运动学的角度对水上地震折射互换法因过河钢丝绳的重量、水的流速和流向、炮点深度等客观因素造成的解释误差进行了分析，揭示了水上地震折射互换法应注意的问题。这对水上地震折射互换法的资料解释进行误差校正提供了理论基础。     

一种基于像素自适应仲裁的OSD分层混合结构设计

数据混合是OSD分层显示的关键技术之一.本文基于OSD的分层结构及数据组织结构特点,提出一种OSD分层显示的单混合结构,该结构采用基于像素自适应仲裁的策略,按照层优先级次序,对多个OSD图层信号实时地切换显示.FPGA验证结果表明,该结构在满足OSD分层混合显示、实现菜单选择鼠标控制等高级人机对话功能的前提下,其硬件资源开销比多混合结构节省约33%以上,且具有良好的层次可扩展性和操作灵活性.     

Techniques and Apparatus for Measuring Rotational Core Losses of Soft Magnetic Materials

In many situations such as the cores of a rotating electrical machine and the T joints of a multiphase transformer, the local flux density varies with time in terms of both magnitude and direction, i.e. the flux density vector is rotating. Therefore, the magnetic properties of the core materials under the rotating flux density vector excitation should be properly measured, modeled and applied in the design and analysis of these electromagnetic devices. This paper presents an extensive review on the development of techniques and apparatus for measuring the rotational core losses of soft magnetic materials based on the experiences of various researchers in the last hundred years.     

综合线损分析系统研究

描述了综合线损分析系统应该具有的主要功能和分析内容，介绍了系统实现中应该注意的几个问题、系统内容和实现方法。     

小议变动成本法的合理性

企业对盈亏临界点的计算通常是以变动成本法为基础，但也有以制造成本法为计算基础的，对于这两种成本方法计算的几种盈亏临界点的情况，本文结合案例，通过比较分析认为：盈亏临界点的计算应当以变动成本法为基础更为合理。     

油气吸收回收系统的研究及工业应用——(Ⅱ)工业试验及效果分析

在油气吸收回收系统中型试验的基础上，开发了常温常压吸收法工业化油气回收系统，并进行了工业应用。结果表明，该油气回收系统平均回收率可达95．13％，每年可回收汽油529t；装车期间装车口周围环境大气中总烃浓度平均降低98．06％。企业通过实施油气回收系统，节能及经济效益明显，且很好地改善了装车场所的作业环境，克服了油气排放带来的安全隐患。     

煤粉着火难易模型的初步建立

利用沉降炉试验系统，针对不同煤质的煤种进行了着火燃烧试验，采用回归分析方法确定了煤粉着火难易模型，按照该模型计算得到的着火温度指数与实际试验中测量得到的结果相符合，证明了模型的精确性。     

Fire performance of wood (Pinus radiata) treated with fire retardants and a wood preservative

In this work, we co‐formulated an oil‐borne copper naphthenate/permethrin wood preservative system with synthetic polymer‐based fire‐retardant additives prior to the impregnation of Pinus radiata sapwood. We evaluated what effect, if any, the preservative had upon the fire performance properties of the fire retardants and whether the fire retardants impacted on the fungicidal and termiticidal efficacy of the preservative. The fire retardants included halogenated and phosphorus‐based systems. A mass loss calorimeter, in conjunction with a thermopile, was used to measure the time to ignition and the peak heat release rate (PHRR) from which the fire performance index (FPI) was determined. The preservative properties were evaluated using termite and soil‐block decay bioassays. In summary, we found that the rate of fire growth was reduced when the fire retardants were used in combination with the wood preservative. We also found that the PHRR was a better determinant of fire performance than the FPI. The performance of the wood preservative was enhanced against fungal decay and termite attack when used in combination with the fire retardants. The fire retardants also demonstrated some wood preservative properties of their own. Copyright © 2008 John Wiley & Sons, Ltd.     

MC^2电缆介质结构及阻抗分析

本文将用数学和实验两种方法证实MC～2电缆不仅能保证特性阻抗变化不超出电缆技术规范。而且能保证在设计频率范围内电缆结构反射损耗最小。     

Spatially resolved infrared spectroscopy: a novel technique for in situ study of spatial surface coverage during CO oxidation on supported catalysts

A spatially resolved infrared (IR) imaging technique to monitor the linear adsorbed CO coverage on supported catalyst surface combining an IR bandpass filter and an IR thermography camera has been developed. Images acquired during the CO adsorption/desorption and ignition indicate that the technique provides an excellent method to image the change of surface coverage with a spatial resolution. It is expected that the combination of infrared thermography with spatially resolved imaging of surface coverage will provide a deeper insight in the dynamics of spatio-temporal patterns on heterogeneous catalysts.