基于MEMS微电极芯片的电穿孔系统

报道了一种基于微加工金电极的细胞电穿孔芯片及一套完整的细胞电穿孔系统。该系统能够在多种细胞系中实现高效细胞电穿孔(对典型HEK-293A(人胚胎肾细胞)细胞的穿孔效率高于90%,3T3-L1(小鼠胚胎成纤维细胞)的电穿孔效率高达80%)。并且具有手动模式和自动模式。同时,由于基于独特的电极设计,其所需电压也远低于现有设备(典型工作电压为60 V),成本更低,操作更安全。     

A universal dependence for thermal conductivity of metals and dilute alloys

A universal curve relating the maximum of thermal conductivity and its respective temperature with the residual electrical resistivity has been proposed for metals and dilute alloys. Based on the equation of that curve, a comparative analysis of selected literature data of thermal conductivity of metals, which have residual electrical resistivity in the range 10^–11<₀<10^–5. cm, have been performed. Using the data for 33 metals, confirmation of the Wiedemann-Franz law for the impurity component/T of thermal conductivity was obtained, which means that _th/_el1, where _th and _el are the parameters of the electron-lattice defect interaction obtained from measurements of thermal and electrical conductivity, respectively. Examples of the failure of the Wiedemann-Franz law are also presented, exhibiting the values of _th/_el in the range 0.16 to 25. Measurements of thermal conductivity in the range 2 to 20 K and determination of the residual electrical resistivity for the samples of Cd doped with Zn and quenched were performed, resulting in values _th/_el1.     

Thermal expansion of Pyros from 20 to 1273 K

Pyros, which is a Ni-base alloy (82% Ni, 8% Cr, 4% W, 3% Mn, and 3% Fe), has been used extensively in France since 1926 as a temperature sensor and as a reference material for thermal expansion measurements. In this paper we present recent data on the expansion and expansivity of Pyros from 20 to 1273 K. Expansivity results, obtained by taking the derivative of a cubic-spline polynomial fitting performed to the L/L experimental data, show that Pyros is a stable material in the 20 to 1273 K temperature range. Furthermore, since the expansivity values are similar to those of steels, Pyros should be of special interest to laboratories which are concerned with expansion measurements on steels. Therefore, we suggest that Pyros be considered as a suitable reference material for thermal expansion measurements on steels, and until more accurate results are obtained, we propose our results as reference data between 20 and 1273 K.Paper presented at the Ninth Symposium on Thermophysical Properties, June 24–27, 1985, Boulder, Colorado, U.S.A.     

低碳钢显微结构的EBSD表征

近年来,新开发的电子背散射衍射技术将多晶材料的显微组织、微区成分与结晶学数据分析联系起来,能对晶界类型、取向、位向差和结构及其分布进行观察、统计测定和定量分析,从而建立了晶界结构、取向和织构等与多晶材料性能的定量和半定量关系,成为现代材料研究的重要实验技术。笔者结合低碳钢生产中的一些实际问题,扼要介绍了电子背散射衍射技术中的晶体取向图在多晶材料显微结构表征中的应用。     

新型铸造镁合金开发现状

总结了近年来镁合金在高温抗蠕变、高韧性、高强度、高耐蚀性、降低成本和改善工艺性六大热点研究方向上取得的典型研究成果，重点阐述了对高温抗蠕变铸造镁合金的研究。并从热力学角度分析了镁合金中可能出现的各相对镁合金高温蠕变过程的影响，叙述了Mg-Al、Mg-Zn和Mg-RE系耐热合金的最新发明。     

边缘AI的霜雪识别系统设计与实现

为提高霜雪识别系统的识别率,开展了基于边缘AI的霜雪识别系统设计。综合海思嵌入式处理器Hi3559A高算力、低功耗特点,硬件部分采用模块复用的方法降低功耗和资源消耗,软件部分,从模型训练、模型量化、模型部署入手对MobileNetV2图像分类网络和ISP自适应处理算法进行改进,最终识别率99.7%,预处理时间0.3 s,图像分类时间0.8 s,模组平均功率2 W,鲁棒性好、性能稳定。由此可见Hi3559A智能相机模组可有效纠正雪深探测仪的疑误数据。     

Genome-Wide Analysis of the Late Embryogenesis Abundant (LEA) and Abscisic Acid-, Stress-, and Ripening-Induced (ASR) Gene Superfamily from Canavalia rosea and Their Roles in Salinity/Alkaline and Drought Tolerance

Canavalia rosea (bay bean), distributing in coastal areas or islands in tropical and subtropical regions, is an extremophile halophyte with good adaptability to seawater and drought. Late embryogenesis abundant (LEA) proteins typically accumulate in response to various abiotic stresses, including dehydration, salinity, high temperature, and cold, or during the late stage of seed development. Abscisic acid-, stress-, and ripening-induced (ASR) genes are stress and developmentally regulated plant-specific genes. In this study, we reported the first comprehensive survey of the LEA and ASR gene superfamily in C. rosea. A total of 84 CrLEAs and three CrASRs were identified in C. rosea and classified into nine groups. All CrLEAs and CrASRs harbored the conserved motif for their family proteins. Our results revealed that the CrLEA genes were widely distributed in different chromosomes, and all of the CrLEA/CrASR genes showed wide expression features in different tissues in C. rosea plants. Additionally, we introduced 10 genes from different groups into yeast to assess the functions of the CrLEAs/CrASRs. These results contribute to our understanding of LEA/ASR genes from halophytes and provide robust candidate genes for functional investigations in plant species adapted to extreme environments.     

含储能型虚拟同步发电机的直驱风机并网系统自适应协调阻尼控制策略

储能型虚拟同步发电机(VSG)的灵活控制特性能够为风电并网系统提供有效的频率和电压支撑,然而系统振荡特性会受到一定程度的影响,同时风电时变出力特性导致的运行点变化也将使得定参数阻尼控制表现出适应性不足的问题.为此,提出了适应风电出力时变特性的自适应协调阻尼控制策略.首先,在风电并网系统状态空间模型的基础上推导线性变参数模型,以直驱风机的有功功率为调度变量,根据稳定域确定运行空间范围;然后,利用间隙度量对运行空间进行划分,确定各子运行空间的典型运行点并将其作为多胞形顶点,建立调度增益与系统运行工况以及控制器的映射关系;最后,针对不同频率振荡模式协调设计自适应控制器.测试系统的仿真结果表明,所设计的自适应协调阻尼控制器不仅能够同时阻尼含储能型VSG并网系统中的次同步振荡和低频振荡,也能在风电出力大范围时变工况下保持良好的阻尼水平.     

应变速率对中碳低温贝氏体钢强塑性的影响

摘要：为探索低温贝氏体钢的断裂行为,研究应变速率对低温贝氏体钢TRIP效应的影响,采用不同应变速率的拉伸试验对低温贝氏体钢的强塑性进行研究。利用扫描电镜（SEM）、透射电镜（TEM）及X射线衍射（XRD）等试验方法对低温贝氏体钢的微观组织、断口形貌及裂纹走向进行表征。结果表明,随着应变速率的提高,试验钢的屈服强度由771MPa上升至806MPa,抗拉强度由1554MPa上升至1606MPa,断后伸长率由13.5%下降至9.0%。主要原因是高应变速率拉伸引发的绝热温升抑制了残余奥氏体的马氏体相变,对试验钢塑性造成负面影响。     

合金元素对低合金耐磨铸钢力学性能的影响

研究了低合金耐磨铸钢中台金元素C、Si、Mn、Mo，对钢的力学性能等的影响。结果表明，合金元素的合理有效搭配，可使钢在连续空冷条件下得到贝氏体为主的显微组织：钢中C、Mn含量增加，其硬度上升，冲击韧度下降，其中以Mn影响最大，C次之：Si、Mo对钢性能影响程度较小，均在研究的中等含量处取得性能的最佳值。