Evaluation of an ultra‐wide bandwidth wireless indoor non‐line‐of‐sight channels

In this paper, based on the analysis of the experimental data using a new post‐processing method for time‐domain channel measurements, a new double‐cluster statistical model for UWB systems with a bandwidth lower than 1 GHz in non‐line‐of‐sight (NLOS) indoor propagation environment is proposed. By using the proposed model, both the model itself and the parameter estimation of the corresponding model are simplified. By defining the polarity of a particular model parameter, the model has the flexibility to deal with both ‘soft NLOS’ and ‘hard NLOS’ indoor propagation environments. Therefore, the channel impulse responses (CIRs) generated by the proposed model ‘resemble’ the measured CIR better than the SV (Saleh‐‐Valenzuela)/IEEE 802.15.3a model not only in terms of the average values, but also in terms of the cumulative distribution functions (CDFs) of the small‐scale statistics. Copyright © 2008 John Wiley & Sons, Ltd.     

Unified fixed‐point analysis of IEEE 802.11 WLAN under saturated and unsaturated conditions

Most of analysis so far for IEEE 802.11 wireless local area networks (WLANs) focuses on saturated condition. However, it is of practical value to take into account the unsaturation case. In this paper, we modified Bianchi's Markov back‐off model to make it applicable to unsaturated condition and the analytic results are provided by employing the renewal‐reward theorem. Under our proposed model, we study the fixed‐point solution of the system and provide a condition to guarantee both the uniqueness and balance of the fixed point. From the fixed point, we find that under unsaturated condition, network parameters should be adjusted according to the traffic load. Then, we study the system throughput. In the case where there are a large number of nodes, we provide closed‐form formulas for the collision probability, the aggregate attempt rate, and the throughput. We find that in such a scenario, the system yields similar performance as that under saturated situation. Moreover, we compare all the results with those under saturated condition and find the latter is a special case of our results. Hence, all of our analysis based on unsaturated condition well covers saturated condition. Our analytical results are validated through ns2 simulations. Copyright © 2010 John Wiley & Sons, Ltd.     

Surface‐Enhanced Raman Scattering Using Microstructured Optical Fiber Substrates

Microstructured optical fibers (MOFs) represent a promising platform technology for fully integrated next generation surface enhanced Raman scattering (SERS) sensors and plasmonic devices. In this paper we demonstrate silver nanoparticle substrates for SERS detection within MOF templates with exceptional temporal and mechanical stability, using organometallic precursors and a high‐pressure chemical deposition technique. These 3D substrates offer significant benefits over conventional planar detection geometries, with the long electromagnetic interaction lengths of the optical guided fiber modes exciting multiple plasmon resonances along the fiber. The large Raman response detected when analyte molecules are infiltrated within the structures can be directly related to the deposition profile of the nanoparticles within the MOFs via electrical characterization.     

Encapsulation of Nanoparticles Using Nitrilotriacetic Acid End‐Functionalized Polystyrenes and Their Application for the Separation of Proteins

The use of nitrilotriacetic acid end‐functionalized polystyrenes (NTA‐PS) as a multifunctional nanocarrier for the aqueous dispersion of CdSe, γ‐Fe₂O₃ and gold nanoparticles (NPs) is described. When the amphiphilic end‐ functionalized polystyrenes and NPs are dissolved together in tetrahydrofuran, the addition of water causes the spontaneous formation of micellar aggregates, resulting in the successful encapsulation and aqueous dispersion of NPs. Transmission electron microscopy (TEM), scanning electron microscopy (SEM), photoluminescence (PL) spectroscopy, and vibrating sample magnetometer (VSM) are used to characterize the structure and properties of the NPs‐containing micellar aggregates (nanocarrier). After complexation of Ni²⁺ with NTA on the surface of the nanocarrier containing γ‐Fe₂O₃, specific binding between Ni‐NTA complex and histidine‐tagged (His‐tagged) proteins enables selective separation of His‐tagged proteins using a magnet.     

Ideal Energy‐Level Alignment at the ZnO/P3HT Photovoltaic Interface

Hybrid semiconductor‐polymer nanostructured solar cells hold the promise of photovoltaic energy conversion based on abundant and nontoxic materials and scalable manufacturing processes. After a decade of intense research activity, hybrid solar cells still exhibit low short‐circuit currents and moderate open‐circuit voltages. These bottlenecks call for a detailed understanding of the physics underlying the device operation at the nanoscale. Using first‐principles calculations the ideal energy‐level alignment of hybrid solar cell interfaces based on the wide bandgap semiconductor ZnO and the polymer poly(3‐hexylthiophene) (P3HT) is investigated. The interfacial charge transfer is quantified and it is shown that this effect increases the ideal open‐circuit voltage with respect to the electron‐affinity rule by as much as 0.5 V. The results of this work suggests that there is significant room for optimizing this class of excitonic solar cells by tailoring the semiconductor/polymer interface at the nanoscale.     

Cold isostatic pressing technique for producing highly efficient flexible dye‐sensitised solar cells on plastic substrates

One of the biggest challenges for making dye‐sensitised solar cells (DSCs) on plastic substrates is the difficulty in making good quality nanoporous TiO₂ films with both good mechanical stability and high electrical conductivity. Cold isostatic pressing (CIP) is a powder compaction technique that applies an isostatic pressure to a powder sample in all directions. It is particularly suitable for making thin films on plastic substrates, including non‐flat surfaces. Cold isostatically pressed nanocrystalline TiO₂ electrodes with excellent mechanical robustness were prepared on indium tin oxide (ITO)‐coated polyethylene naphthalate (PEN) substrates in the absence of organic binders and without heat treatment. The morphology and the physical properties of the TiO₂ films prepared by the CIP method were found to be very compatible with requirements for flexible DSCs on plastics. This room‐temperature processing technique has led to an important technical breakthrough in producing high efficiency flexible DSCs. Devices fabricated on ITO/PEN films by this method using standard P‐25 TiO₂ films with a Ru‐complex sensitiser yielded a maximum incident photon‐to‐current conversion efficiency of 72% at the wavelength of 530 nm and showed high conversion efficiencies of 6.3% and 7.4% for incident light intensities of 100 and 15 mW cm⁻², respectively, which are the highest power conversion efficiencies achieved so far for any DSC on a polymer substrate using the widely used, commercially available P‐25 TiO₂ powder. Copyright © 2011 John Wiley & Sons, Ltd.     

^99mTc—MIBI评价缺血／再灌注心肌活力的实验研究

应用＾９９ｍＴＣ－ＭＩＢＩ对家兔缺血／再灌注心肌细胞及线粒体代谢和活力进行了评价，将家兔ＬＡＤ阻断２０ｍｉｎ，３ｈ再灌主，于灌注后２－５ｍｉｎ静脉注射＾９９ｍＴｃ－ＭＩＢＩ，结果缺血３ｈ组缺血心肌再灌注早期（１０ｍｉｎ）晚期（３ｈ）相对放射性活度，心肌ＡＴＰ含量均明显低于缺前２０ｍｉｎ组，非缺血心肌和缺血２０ｍｉｎ心肌＾９９ｍＴｃ－ＭＩＢＩ亚细胞分布与ＳＤＨ活性呈显著正相关（ｒ＝０．８８，Ｐ〈０．