Effects of an organic phosphorus nucleating agent on crystallization behaviors and mechanical properties of poly(propylene)

The effects of an organic phosphorus nucleating agent on the crystallization behavior and mechanical properties of poly(propylene) were investigated. As the concentration of nucleating agent increased from 0 to 0.8%, the tensile and flexural strengths of the nucleated poly(propylene) resin increased by 15%, the flexural modulus increased by 35%, the crystallization peak temperature increased by 10°C, and the nucleation density (calculated with the nonlinear Voltrra integral equation) increased by 10⁶ times. Mechanical properties increased with nucleation density. Linear equations between the mechanical properties and the logarithmic nucleation density were revealed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 297–301, 2003     

重钙装置改产DAP的工程实践

介绍瓮福重钙装置采用混合工艺改产 DAP的技术改造及试车概况、试车中出现的问题及解决措施。     

TiB2的SHS合成过程理论分析

在ＴｉＢ２陶瓷材料的自蔓延高温合成（简称ＳＨＳ）过程中，通过改变原料的起始温度，稀释剂的含量和原始颗粒的尺寸等都可以调节合成过程的绝热温度，产物中熔融相的含量，以及燃烧波蔓延的速度，人而最终影响合成产物的结构和性质。本文对上述各种关系进行了理论计算和分析，其结果对实际合成与制备过程将有着重要的指导作用。     

时间Petri网与CAGA算法相结合的并行测试研究

在并行测试的研究中对于任务的测试次序一直是个研究重点及难题。用时间Petri网建立关于并行测试系统的模型,并首次用元胞遗传算法(CAGA)对模型中的变迁序列进行搜索,快速得到最好的测试序列。通过仿真结果表明,该算法展示了很好的收敛效果,并且与已有的研究成果相比更具优势。     

Removal of chromium (VI) from dilute aqueous solutions by activated carbon developed from Terminalia arjuna nuts activated with zinc chloride

Different structured activated carbons were prepared from Terminalia arjuna nuts, an agricultural waste, by chemical activation with zinc chloride for the adsorption of Cr(VI) from dilute aqueous solutions. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor, g/g). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. A high surface area of was obtained at a chemical ratio of 300%, carbonization time and temperature of 1 h and 500 °C, respectively. The activated carbon developed shows substantial capability to adsorb Cr(VI) from dilute aqueous solutions. The parameters studied include pH, adsorbent dosage, contact time, and initial concentrations. The kinetic data were best fitted to the Lagergren pseudo-first-order model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. The maximum removal of chromium was obtained at pH 1.0 (about 99% for adsorbent dose of 2 g/l and 10 mg/l initial concentration).     

HDPE耐环境应力开裂性能的研究及改进

对HDPE的耐环境应力开裂性能进行了研究。试验表明:采用共混及化学改性的方法,HDPE的耐环境应力开裂性能有了很大提高,为解决HDPE树脂在制作管材时出现的短时间内应力开裂问题提供了依据。     

EMD-IT去噪算法的阈值估计方法

为解决EMD-IT去噪算法中阈值难以确定的问题,提出一种基于高斯白噪声能量分布的阈值估计方法。将含噪信号进行经验模态分解并估计各固有模态函数(IMF)中噪声的能量;根据模态单元阈值的含义,在各IMF中利用去除掉的模态单元包含的总能量等于噪声能量这一准则估计阈值。合成数据和实际心电信号的去噪仿真实验验证了该方法的有效性,其是自适应的且避免了阈值选择的主观性。     

THE EFFECT OF PRECIPITATION PARAMETERS ON PREPARATION OF LITHIUM FLUORIDE (LIF) NANO-POWDER

Lithium fluoride powder (LiF) is a white powder with a density of 2.64 gr/cm³ and a melting point of 848°C. This powder has several applications such as flux, glaze, soldering, and aluminum melting process, but one of the most important uses of this powder is its application in dosimetry. The commercial powders currently used for this purpose have average sizes of 5 to 10 micrometers; the objective of this research is to produce LiF powder with nano-metric particle size. In this study, the reaction of LiOH + HF → LiF + H₂O has been selected from among several reactions that were able to produce LiF powder, and some precipitation parameters such as temperature, time, agitation type, and supersaturation degree have been controlled. The morphology, phase analysis, and particle size distribution of the resulting powders were analyzed by SEM, XRD, and LPSA. Finally, lithium fluoride nano-powder was synthesized at a temperature of 25°C, pH about 2-3, reaction time less than 1 s, and agitation by ultrasonic bath.     

Miscibility behavior of blend of polyesteramides of linseed oil and dehydrated castor oil with poly(methacrylic acid)

Blending of two polymers in solution is a simple and cost‐effective technique to improve upon the physical and mechanical properties of the component polymers through synergism. To obtain maximum synergy in their properties, the component polymers should be miscible with each other on molecular scale. Polymer blends of complex physicomechanical properties are being actively investigated. Poly(methacrylic acid) (PMAA), a commercial polymer, yields transparent, hard, brittle, and water‐sensitive films. It has been blended with natural polymers like dextran, collagen, and gelatin to obtain films with improved physical and mechanical characteristics. Polyesteramides, which are easily synthesized from vegetable seeds oil, a sustainable resource, have found application in surface coatings. These oligomeric products do not make free standing films in the ambient condition. The polyesteramides from vegetable seeds oil can be used to obtain blend with PMMA of improved mechanical and water absorption properties. In this study, linseed oil polyesteramide (LOPEA) and dehydrated castor oil polyesteramide (DCPEA), the source oils with different unsaturation in their fatty acid chains, were blended with PMAA through mixing in solution in the ratio DCPEA/LOPEA: PMAA as 80/20, 70/30, 60/40, 50/50, 40/60, 30/70, and 20/80. In the first instance, the miscibility of the two components was investigated in solution by viscosity and ultrasonic measurements and in solid phase through differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). Moisture absorption by the blend was also studied. DCPEA and LOPEA show immiscibility with PMAA in solution phase while LOPEA with more unsaturation in the fatty acid chain of the oil was found more immiscible than DCPEA. DCPEA shows a narrow miscibility window in the solid phase while LOPEA was found immiscible with PMAA in the solid phase too. Uptake of moisture was found to be markedly reduced in the blends of DCPEA/LOPEA with PMAA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1367–1374, 2007:     

镁铝水滑石及其复合体系对PVC热稳定性能的调控

采用比色法、热失重法等研究了不同镁铝摩尔比的水滑石(LDHs)对PVC糊热稳定性能的影响。结果表明,在镁铝比分别为2、3、4的样品中,镁铝比为2的LDHs对PVC的热稳定效果最佳;将其与传统的铅盐、有机锡稳定剂复配,均具有良好的协同效应,可以实现对PVC糊热稳定性能的控制。其中,PVC/Mg-AlLDHs/Sn以100∶1.5∶1.5(质量份数,下同)比例复合后的体系,不仅热稳定性能优于传统的的铅盐体系,而且具有较低的糊黏度及较好加工流变性能。