碳酸钙填充塑料成本分析

碳酸钙粉体经过活化、造粒处理填充到聚乙烯薄膜,可使填充制品成本降低。随着填料的增加,其加工性能逐渐变差,单位质量塑料产品体积减小。经测算,使用填充剂后成本的降低足以弥补因体积减小产生的损失。对于薄膜制品而言,填充量小于10%效益增加不明显;超过30%,则不容易稳定成膜,影响成品质量。     

GYM系列亿丰磨在非金属矿物超微粉碎中的应用

干法生产超细粉是我国非金属粉体的重要加工工艺之一，传统的粉磨设备难以达到大量生产d97=2—10μm超细粉的要求，且生产效率低。阐述了采用多磨轮、多磨道原理设计的GYM-83型亿丰磨在生产粒径为11μ的碳酸钙干粉时，其累积分布达98％，粒径为2μm的占总质量44．96％，产量达到了1250kg／h，且基建投资少，性价比好。     

PE-LLD／EVA／Mg（OH）2／复合阻燃剂高效无卤阻燃体系的研究

采用线形低密度聚乙烯/乙烯-醋酸乙烯共聚物作为复合材料主体,表面处理过的氢氧化镁(Mg(OH)2)为主阻燃剂,以微胶囊化红磷和自制硅类阻燃剂为核心的复合阻燃剂为阻燃增效剂,重点探讨了Mg(OH)2和复合阻燃剂的阻燃效果。结果表明,Mg(OH)2与复合阻燃剂并用具有良好的协同效应,当Mg(OH)2用量40份,复合阻燃剂5～7份时,可获得较高的氧指数,垂直燃烧试验通过FV0级,且材料抗静电能力提高,力学性能、加工性能较好。     

绿色水处理剂氢氧化镁应用的研究进展

氢氧化镁(氧化镁)被称为绿色安全的废水处理剂,本文评述了氢氧化镁在环境保护方面的研究与应用进展,包括工业废水中铅、铬、镍等重金属离子的去除和酸性废水的中和处理,并列举了氢氧化镁对一些实际废水的良好处理效果,包括其对一些特殊废水如含硼废水和放射性废水的处理效果,最后展望了其在生产和应用方面的发展前景。     

硼酸与硫酸镁对硼收率影响的分析

介绍了在硼酸生产工艺中影响硼收率的主要因素。以生产系统中硼酸浓度和硫酸镁两个方面探讨了对硼收率影响的原因，并把分析结果应用于生产实践中，调整了部分工艺参数。证明：调整酸化浓度，控制母液中硼酸含量，硼的收率比以往确有提高，是一种不增加设备，不增加投资的行之有效的方法。     

盘式干燥机在高纯碳酸钡生产中的应用

对盘式干燥机的工作原理、结构特点进行了详细介绍，并将其它干燥设备和盘式干燥机作了对比，指出高纯碳酸钡行业采用盘式干燥机可以将生产成本降到最低限度，而产品质量可以得到很大提高。盘式干燥机也可用于高纯碳酸锶、硫酸钡等粘性物料的干燥，效果也非常理想，应用前景广阔。     

Estimation of Concentration of Particles in Polymerizing Fluid during Centrifugal Casting of Functionally Graded Polymer Composites

The concentration of uniformly distributed particles in a fluid changes with time in the direction of gravitational or centrifugal force to form a concentration gradient. The change in the concentration is an outcome of velocity variation of particles in a fluid. A modified equation for terminal velocity, v _m of particles in polymerizing-fluid under centrifugal force is proposed to estimate the changes in the volume fraction of particles in the graded composites. The proposed equation introduces the effect of cure kinetics of polymer and its effect on particle movement in the model that was based on the modified Stoke’s law, considering the parameters related to particle hindrance, centrifugal force, particle dimensions, viscosity variation etc. The model predictions of concentration changes at the different locations of samples were compared with calcium carbonate filled polysulphide-modified-epoxy graded composites prepared by centrifugal casting.. The effect of particle size, delayed curing rate of matrix were explored. The simulated results are in good agreement with those of experiments.     

镁盐对印染废水脱色处理研究

用镁盐对印染工业酸性染料和混合活性染料废水脱色处理。考察了pH值和镁盐添加量等对脱色效果的影响，同时将镁盐和亚铁盐的脱色效果进行了比较。实验结果表明：镁盐具有良好的脱色效果，在镁盐添加量为600mg/L，pH值11．0－11．5的条件下，脱色率达91％以上，说明镁盐是一种安全、无毒、无害的“环境友好型”绿色水处理剂。     

碳酸钙对乙烯-丙烯酸丁酯共聚物阻燃与力学性能及热降解行为影响研究

采用极限氧指数法、热重分析和差示扫描量热分析等研究了碳酸钙（CaCO3）对乙烯-丙烯酸丁酯共聚物（EBA）阻燃及热降解行为的影响，探讨了CaCO3对EBA力学性能和熔体流动速率的影响。结果表明，CaCO3降低了EBA的拉伸强度、断裂伸长率和熔体流动速率，但复合阻燃材料仍具有良好的加工性能；当CaoCO3含量为60％（质量分数，下同）时，阻燃材料的极限氧指数可达28．5％。CaCO3通过EBA在热降解过程中与之发生化学反应来改变EBA的热降解行为，提高在高温下的热稳定性，降低EBA的热降解速率，促进高温下成炭在凝缩相中发挥阻燃作用。此外，CaCO3与EBA在热降解过程中形成隔热、隔氧的多孔泡沫膨胀结构，可进一步加强阻燃效果。     

Kinetics of methane hydrate formation in aqueous electrolyte solutions

Experimental data on the kinetics of methane hydrate formation in aqueous electrolyte solutions are reported. The experiments were carried out in a semi-batch stirred tank reactor in three NaCl and two KCl solutions as well as in a solution containing a mixture of NaCl and KCl at three different nominal temperatures from 270 to 274 K and at pressures ranging from 3.78 to 7.08 MPa. The kinetic model developed by Englezos et al. (1987a) was adapted to predict the growth of hydrates. The model is based on the crystallisation theory coupled with the two-film theory for gas absorption in the liquid phase. The kinetic rate constant which appears in the model was that obtained earlier for methane hydrate formation in pure water. The effect of the electrolytes was taken into account through the computation of the three-phase equilibrium conditions and the corresponding fugacities. Overall, the model predictions match the experimental data very well with the largest prediction error being less than 10%.