一种改进选择算子的遗传算法在泊松曲线沉降预测模型中的应用

选择算子是遗传算法的重要算子之一,它对于种群的多样性和算法的收敛性具有重要的影响。本文对轮盘赌选择算子进行改进,将适应值分组应用于种群个体的选择中,提出适应度分组轮盘赌,并将该方法用于泊松曲线沉降预测模型的优化。实验结果表明,该算法为泊松曲线沉降预测模型的参数估计提供一种有效的方法。     

Helmholtz共振腔气动噪声数值仿真

为探究出一套完整、准确的气动噪声仿真方法,用FLUENT和Actran仿真Helmholtz共振腔旁接管道系统模型.针对流场仿真,采用六面体网格建模,分析选择合适的网格密度,明确网格及边界条件的影响,以获得准确的声源信息;运用Lighthill声类比方法对声场进行仿真,采用数值计算、传声损失仿真和气动噪声仿真计算等3种方法提取管道内部场点声压级频谱曲线,分析曲线峰值频率特征,包括共振频率分析和声模态分析等.采用CFD软件与声学仿真软件相结合的方法,可以有效进行流场和声场的仿真.     

Photoshop色阶和曲线工具的对比分析

介绍了Photoshop软件中色阶和曲线工具的主要功能。通过几种不同的色彩调整示例,给出了色阶和曲线工具达到同样调整效果的方法要点和对比分析,从而得到曲线和色阶工具在调整功能、范围和难易等方面的区别,方便在实际应用中针对不同的调整效果选择不同的调整工具。     

基于ECC-ZKP的农产品供应链可控身份管理与认证模型

基于区块链的农产品供应链中,当参与主体数量规模越来越大时,节点与企业之间的1：1匹配关系将造成节点数量众多,从而造成网络开销大、共识效率低等问题。针对这些问题,引入中间件使得节点与企业之间1：1关系变为1：n的关系,对所涉及到的企业身份管理以及相互之间的认证,提出一种基于ECC-ZKP（elliptic curve cryptosystem-zero—knowledge proof）的可控身份管理与认证模型,实现身份的可控管理和完成可信交易前所需要的身份认证。通过模型分析和仿真实验分析结果表明,该模型能够提供较高的安全性,能够有效进行身份的管理和认证,且节点与企业之间1：n关系相比较于1：1关系减少了网络开销并提高了共识效率。     

堆石混凝土单轴受压应力-应变全曲线试验方法研究

为了研究堆石混凝土应力-应变全曲线,采用碟形弹簧与钢柱组合成附加刚性元件增强压力机的刚性,研究了碟形弹簧并联与串联联结装置的变形量和刚度以及实现单轴受压端部减摩措施,提出了一种堆石混凝土单轴受压应力-应变全曲线的试验方法。在混凝土压力试验机上进行了堆石混凝土立方体试件单轴受压试验,测得了堆石混凝土受压应力-应变全曲线。试件破坏形态表明,采用的端部减摩措施有效,测得的应力-应变曲线下降段验证了碟形弹簧与钢柱组合装置能够吸收试件破坏时混凝土压力试验机存储的变形能。研究结果为在混凝土压力试验机上进行堆石混凝土单轴受压应力-应变全曲线提供了可行、简便、经济的测试方法。     

阿姆河流域耕地变化及水土匹配特征分析

基于中亚阿姆河流域4个分区1990—2015年间土地利用变化和水资源等数据,运用耕地变化速率、洛伦兹曲线和基尼系数法以及水土资源匹配系数对阿姆河流域耕地变化和水土匹配状况进行了综合分析。结果表明:1990—2015年阿姆河流域耕地以146.74 km²/a的速度在扩张,且各时期、各分区扩张的速度不同;在不考虑咸海来水不断减少、生态持续恶化的前提下,绿洲区匹配状况属比较公平和相对合理状况;阿姆河流域水土资源空间分布存在明显的错位现象;全流域生态用水被农业用水严重挤占,阿姆河流域灌溉面积、灌溉用水量成为影响咸海水量及面积变化的重要因素,是一种不可持续的用水方式。     

Adaptive synchronization of master–slave systems with mixed neutral and discrete time‐delays and nonlinear perturbations

This paper investigates the delay‐dependent adaptive synchronization problem of the master and slave structure of linear systems with both constant neutral and time‐varying discrete time‐delays and nonlinear perturbations based on the Barbalat lemma and matching conditions. An adaption law which includes the master‐slave parameters is obtained by using the Lyapunov functional method and inequality techniques to synchronize the master‐slave systems without the knowledge of upper bounds of perturbation terms. Particularly, it is shown that the synchronization speed can be controlled by adjusting the update gain of the synchronization signal. A numerical example has been given to show the effectiveness of the method. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

A relation between interfacial and bulk properties along the saturation curve

A liquid-vapor interface in thermal equilibrium was considered, where the pressure tensor depends upon the density (z) and the position z. The surface tension coefficient results are parametrized with the bulk compressibility, liquid-vapor density difference, and interfacial width along the saturation curve. Previous results at the triple and critical points reported by other investigators are verified. Also included is a plot of the computed results using the parametric equation and experimental data for different substances.     

Teleoperation to robotics at Langley Research Center

A popular conception of the evolution of remote manipulation is a progression from teleoperation to telerobotics and then to robotics. This is logical because in going from teleoperation to robotics there would appear to be a continuous decrease in manned workload, an increase in system complexity, and an increase in the amount of intelligence in the automated system. During the past 10 years NASA Langley Research Center (LaRC) has been involved in all three areas. The decision on which system is most suitable for a task depends not only on the task, but on the allocation of responsibility for intelligence or high level control. The operator may be responsible for all intelligence and control functions, they may be shared between the operator and the automated system, or they may be performed by an autonomous system. This paper discusses some of the experiences in each area in applications related to possible space tasks and some of the lessons learned.     

基于码本模型和多特征的早期烟雾检测

提出一种基于码本模型和多特征的早期烟雾检测算法。首先,利用码本模型进行前景提取;然后,结合烟雾的颜色模型和形状特征模型检测前景中的疑似烟雾区域;最后,利用烟雾的动态特性,有效地降低误检率,提高算法的鲁棒性。通过ROC曲线对比,实验结果表明,该算法具有良好的烟雾检测能力。同时,能够满足实时性要求,具有较高的实用价值。