凹凸棒粘土用作高水速凝注浆悬浮剂

以凹凸棒粘土作为高水速凝固化充填材料的悬浮稳定剂，考察了不同制浆机械对凹凸棒粘土制浆率的影响。采用高剪切混合乳化机预制的1％凹凸棒粘土浆配制高水速凝固化充填材料甲、已料单浆可获得满意的悬浮稳定效果。其充填体结石抗压强度早期发展迅速，后期持续增长。采用此工艺，注浆料的材料成本仅增加2％。     

Critical transistors nexus based circuit-level aging assessment and prediction

Accurate age modeling, and fast, yet robust reliability sign-off emerged as mandatory constraints in Integrated Circuits (ICs) design for advanced process technology nodes. In this paper we introduce a novel method to assess and predict the circuit reliability at design time as well as at run-time. The main goal of our proposal is to allow for: (i) design time reliability optimization; (ii) fine tuning of the run-time reliability assessment infrastructure, and (iii) run-time aging assessment. To this end, we propose to select a minimum-size kernel of critical transistors and based on them to assess and predict an IC End-Of-Life (EOL) via two methods: (i) as the sum of the critical transistors end-of-life values, weighted by fixed topology-dependent coefficients, and (ii) by a Markovian framework applied to the critical transistors, which takes into account the joint effects of process, environmental, and temporal variations. The former model exploits the aging dependence on the circuit topology to enable fast run-time reliability assessment with minimum aging sensors requirements. By allowing the performance boundary to vary in time such that both remnant and nonremnant variations are encompassed, and imposing a Markovian evolution, the probabilistic model can be better fitted to various real conditions, thus enabling at design-time appropriate guardbands selection and effective aging mitigation/compensation techniques. The proposed framework has been validated for different stress conditions, under process variations and aging effects, for the ISCAS-85 c499 circuit, in PTM 45 nm technology. From the total of 1526 transistors, we obtained a kernel of 15 critical transistors, for which the set of topology dependent weights were derived. Our simulation results for 15 critical transistors kernel indicate a small approximation error (i.e., mean smaller than 15% and standard deviation smaller than 6%) for the considered circuit estimated end-of-life (EOL), when comparing to the end-of-life values obtained from Cadence simulation, which quantitatively confirm the accuracy of the IC lifetime evaluation. Moreover, as the number of critical transistors determines the area overhead, we also investigated the implications of reducing their number on the reliability assessment accuracy. When only 5 transistors are included into the critical set instead of 15, which results in a 66% area overhead reduction, the EOL estimation accuracy diminished with 18%. This indicates that area vs. accuracy trade-offs are possible, while maintaining the aging prediction accuracy within reasonable bounds.     

Recommending suitable learning scenarios according to learners’ preferences: An improved swarm based approach

The paper presents a new approach for recommending suitable learning paths for different learners groups. Selection of the learning path is considered as recommendations to choosing and combining the sequences of learning objects (LOs) according to learners’ preferences. Learning path can be selected by applying artificial intelligence techniques, e.g. a swarm intelligence model. If we modify and/or change some LOs in the learning path, we should rearrange the alignment of new and old LOs and reallocate pheromones to achieve effective learning recommendations. To solve this problem, a new method based on the ant colony optimisation algorithm and adaptation of the solution to the changing optimum is proposed. A simulation process with a dynamic change of learning paths when new LOs are inserted was chosen to verify the method proposed. The paper contributes with the following new developments: (1) an approach of dynamic learning paths selection based on swarm intelligence, and (2) a modified ant colony optimisation algorithm for learning paths selection. The elaborated approach effectively assist learners by helping them to reach most suitable LOs according to their preferences, and tutors – by helping them to monitor, refine, and improve e-learning modules and courses according to the learners’ behaviour.     

家电卷材涂料用HDI改性聚酯树脂的研制

以己二异氰酸酯（HDI）改性聚酯树脂与氨基树脂配制成家电用卷材涂料。阐述了氨酯键对涂膜性能的贡献。探讨了HDI用量对涂膜性能的影响。     

Synthesis of Pseudoionones by Acid and Base Solid Catalysts

The preparation of pseudoionones by aldol condensation reaction between citral and acetone have been carried out in the presence of acid (HY and beta zeolites), an acid–base (amorphous aluminophosphate) and basic catalysts such as an aluminophosphate oxynitride, MgO and different activated hydrotalcites. The results showed that acid or acid–base catalysts were not successful for performing in one pot the preparation of ionones. MgO and calcined hydrotalcites showed excellent activity and selectivity to pseudoionones, with calcined hydrotalcite more selective than MgO. Moreover, the rate of reaction can be improved by activating the hydrotalcite through rehydration. This activation can be successfully done by simply adding the optimum amount of water to the calcined hydrotalcite before reaction. The inhibiting effect of the concentration citral on the catalytic activity of rehydrated hydrotalcites that has been reported to occur at 273 K can be avoided by working at a reaction temperature of 333 K.     

电厂电气运行中常见故障分析及其应对措施探讨

为了保证电厂的生产效率,必须要分析电气的运行特征,确定电气故障发生的原因,综合考虑多方面因素,选择切实可行的措施解决问题。简要分析了电厂电气运行常见故障发生原因,并提出了相应的解决措施。     

D级压力容器制造许可证鉴定评审中企业存在问题综述

阐述了在D级压力容器制造许可证取换证鉴定评审过程中,取换证制造企业存在的较为普遍的问题。     

TESTS FOR FRACTIONAL INTEGRATION:A MONTE CARLO INVESTIGATION

Abstract. The performance of the Geweke-Porter-Hudak (GPH) test, the modified rescaled range (MRR) test and two Lagrange multiplier (LM) type tests for fractional integration in small samples is examined using Monte Carlo methods. Both the GPH and MRR tests are found to be robust to moderate autoregressive moving-average components, autoregressive conditional heteroskedasticity effects and shifts in the variance. However, these two tests are sensitive to large autoregressive moving-average components and shifts in the mean. It is also found that the LM tests are sensitive to deviations from the null hypothesis. As an illustration, the GPH test is applied to two economic data series.     

Zonal disintegration phenomenon in enclosing rock mass surrounding deep tunnels -- Elasto-plastic analysis of stress field of enclosing rock mass

The zonal disintegration phenomenon (ZDP) is a typical phenomenon in deep block rock masses. In order to investigate the mechanism of ZDP, an improved non-linear Hock-Brown strength criterion and a bi-linear constitutive model of rock mass were used to analyze the elasto-plastic stress field of the enclosing rock mass around a deep round tunnel. The radius of the plastic region and stress of the enclosing rock mass were obtained by introducing dimensionless parameters of radial distance. The results show that tunneling in deep rock mass causes a maximum stress zone to appear in the vicinity of the boundary of the elastic and the plas-tic zone in the surrounding rock mass. Under the compression of a large tangential force and a small radial force, the rock mass in the maximum stress zone was in an approximate uniaxial loading state, which could lead to a split failure in the rock mass.     

Investigation on the electrocatalytic characteristics of SnO_2 electrodes with nanocoating prepared by electrodeposition method

SnO2 electrodes have many advantages in the degradation of toxic or bio-refractory organic wastewater,and SnO2 is a kind of anode material which has the potential to be widely used.Electrocatalytic effi-ciency and service life of Ti\SnO2 electrodes are key factors that can influence its applications.In order to enhance the electrocatalytic characteristics of Ti\SnO2 electrodes,a type of electrocatalytic electrode with nanocoating was prepared by direct current(DC)electrodeposition method and thermal oxidati...