自韧Si3N4陶瓷的显微结构及其性能研究

利用热压的方法制得室温断裂韧性和抗弯强度分别为１１．２ＭＰａ·ｍ￣（１／２）、８２３ＭＰａ，高温（１３５０℃）断裂韧性和抗弯强度分别为２３．９ＭＰａ·ｍ￣（１／２）、６３０ＭＰａ的自韧Ｓｉ＿３Ｎ＿４陶瓷。研究了显微结构和力学性能之间的关系。结果表明：玻璃相的含量、β－Ｓｉ＿３Ｎ＿４的长径比等对性能有重要影响。分析了自韧Ｓｉ＿３Ｎ＿４陶瓷的增韧机理，通过ＳＥＭ明显观察到Ｓｉ＿３Ｎ＿４中存在裂纹偏转、分支和β－Ｓｉ＿３Ｎ＿４拔出现象。     

马来酸及其酐和衣康酸与PP熔体接枝反应机理的研究

以马来酸酐作对照，用热分析、流变、化学分析等方法，研究了马来酸和衣康酸在非隔氧条件下与ＰＰ熔体催化接枝反应的特点和规律，阐述了单体结构－单元反应相对速率－－接枝产物结构之间的关系，提出了３种接枝物的结构模型。     

精轧油膜轴承密封失效机理的初步分析

对油膜轴承密封出现的进水、漏油现象作了大量的调查、测量和统计分析，找出了产生质量事故的根本原因，提出了解决措施。     

雁翎油田注氮气提高采收率工艺技术

在现有的提高采收率方法中,注气驱是应用较广、效果较好的方法,特别是注氮气驱由于其气源广泛、价廉经济、无腐蚀性,以及要求的油藏地质结构特征和原油的物理性质等因素的变化范围广泛等特产,这种提高采收率的方法应用的最为普及,代表了目前提高采收率的发展方向。结合雁翎油田实例,简要介绍了注氮气提高采收率的机理、注气井组建设、制氮工艺及注气后的采油完井方式、方法。     

乙烯基三甲基硅烷等离子体聚合反应历程

应用色谱—质谱(GC-MS)及裂解色谱-质谱(PGC-MS)测定了乙烯基三甲基硅烷等离子体聚合反应中的气体冷凝物及聚合物,研究推导了等离子体聚合反应历程。单体在气相中被电子撞击,然后扩散到基底,在基底发生链增长和链终止反应。     

Stationary and traveling hot spots in the catalytic combustion of hydrogen in monoliths

In the course of catalytic combustion of hydrogen (1-5% H₂ in air) in monolith reactors, strongly localized stationary and traveling hot spots arise in response to a sudden and persistent rise of gas flow velocity. Such hot spots may occur, e.g. in a catalytic converter following the acceleration of a car or in a catalytic combustor as a result of a load increase. This phenomenon is illustrated by simulations using a two-phase reactor model. The temperature overshoot of the adiabatic limit is typically of the order of the adiabatic temperature rise itself.The following mechanism underlies this behavior. Light fuel is supplied to the catalytic wall by fast diffusion (in the direction perpendicular to flow), while the heat released by reaction is removed from the wall by the slower, mixture-averaged heat conduction. This leads to accumulation of heat at the catalytic surface that eventually saturates at high temperatures. The hot spots may exhibit intricate dynamics, propagating downstream or upstream, or they may remain stationary. The direction of propagation depends on the relative strength of convective downstream and conductive upstream contributions to the overall displacement of reaction fronts. Generally, the hot spot tends to drift downstream at low flow velocities, remain stationary at intermediate flow velocities, and drift upstream at high flow velocities.     

GH871 合金的蠕变断裂机制

对采用AIM+ESR和VIM+ESR工艺冶炼的GH871合金在650 ℃的蠕变性能及特征的研究表明,与用AIM+ESR工艺冶炼的GH871合金相比,用VIM+ESR工艺冶炼的GH871合金在蠕变断裂过程中裂纹萌生的形式(包括裂纹形状及形成时间)和裂纹扩展至裂纹连接所需的时间均表现出明显韧化的特征.     

Mechanism for the Peritectic Reaction and Growth of Aligned Grains in YBa2Cu3O6+x

It is experimentally observed that the peritectic reaction, 211 + liquid → 123, can be driven essentially to completion in 1 h at an undercooling of only ∽30°C. The kinetic data, together with the observed microstructures, are inconsistent with the normal mechanism of the peritectic reaction. It is proposed that the mechanism of the reaction involves dissolution of 211 particles into the liquid and precipitation of solid 123. The aligned grain structure is explained through sympathetic nucleation of new 123 grains on existing grains.     

n-Al2O3/Ni复合镀层的组织与滑动磨损性能研究

用电刷镀技术制得了镍基n-Al2O3复合镀层，并对镀层的滑动磨损性能进行了试验研究。纳米复合镀层的表面形貌比较细腻，镀层中纳米粒子分布均匀，与基质金属结合紧密。镀层显微硬度达到HV700，比快速镍镀层提高约40％。滑动磨损试验结果表明，随着纳米粒子含量的增大，镀层的耐磨性提高，摩擦系数也呈增大趋势；但当镀层中n-Al2O3粒子的超过2.56%(质量分数）时，镀层的耐磨性显著下降。纳米复合镀层的磨损机制以疲劳磨损为主，而快速镍底层以粘着磨损为主。     

石灰竖窑工作衬砖蚀损机理的探讨

阐述了石灰竖窑的预热带、煅烧带和冷却带工作衬砖蚀损机理，并讨论了如何根据耐火砖性能和石灰竖窑不同区域的蚀损机理，选择耐火材料。