ECS-100 DCS控制系统在离子膜制碱装置中的应用

介绍某公司引进的离子膜制碱装置采用国产DCS系统的原由，系统的结构及特点。详细论述ECS-100 DCS在装置的特殊控制、顺序控制、联锁等方面的应用情况。     

低压反渗透复合膜NTR—7250的脱盐性能

测定了ＮＴＲ－７２５０膜的脱盐性能。结果表明，该膜水通量约为ＣＡ膜的５倍；脱盐率主要受阴离子控制，并随电荷数递增；水中结垢成分被优先除去，ＳＯ４＾２－，硬度和ＨＣＯ３＾－除去率分别大于９７％，８１％，７６％；该膜抗氧化能力与ＣＡ膜相当，而适用ＰＨ范围更宽，并且可在较高水温下长期使用。     

Corrosion inhibition of carbon steel in acid chloride solution using ethoxylated fatty alkyl amine surfactants

Four novel non-ionic ethoxylated fatty alkyl amine surfactants (I–IV) were synthesised and investigated as corrosion inhibitors of carbon steel in 1 M hydrochloric acid solution using gravimetric, open circuit potential and potentiostatic polarisation techniques. The percentage inhibition efficiency (η%) for each inhibitor increased with increasing concentration until the critical micelle concentration (cmc) was reached. The maximum inhibition efficiency approached 95.1% in the presence of 400 ppm of the inhibitor (IV). It was found that the adsorption of the surfactants on carbon steel followed the Langmuir adsorption isotherm. Potentiostatic polarisation data indicated that these surfactants act as mixed type inhibitors. The values of activation energy (E _a*) of carbon steel dissolution in 1 M HCl were calculated in the absence and presence of 400 ppm of each inhibitor. Finally, scanning electron microscopy (SEM) was used to examine the surface morphology of polished carbon steel surfaces and those immersed in 1 M HCl in the absence and presence of 400 ppm of inhibitor (IV).     

亚砜基改性纤维素膜的SO2气体渗透性能研究

分别使用二甲基亚砜浸泡的物理方法及苯基乙烯基亚砜加成的化学方法对纤维素膜进行了改性,并对改性膜的性能进行了测试.结果表明改性后纤维素膜仍为致密结构,SO2的渗透性能及其对N2的分离性能明显提高,其中改性液中添加二甲基亚砜的均相化学加成反应所得的改性膜具有较好的SO2渗透稳定性.     

Sorption and permeation of solutions of chloride salts, water and methanol in a Nafion membrane

The sorption of water–methanol mixtures containing a dissolved chloride salt in a Nafion 117 membrane, and their transport through the membrane under the driving force of a pressure gradient, have been studied. Both type of experiments was performed by using five different salts: lithium chloride, sodium chloride, cesium chloride, magnesium chloride and calcium chloride. It was observed that both the permeation flow through the membrane and the membrane swelling increase significantly with the methanol content of the solutions. These facts are attributed to the increase in wet membrane porosity, which brings about the increase of the mobility of solvents in the membrane, besides the increase of the mobility of the polymer pendant chains. In contrast, the influence of the type of electrolyte on the membrane porosity and permeability is not very important, with the exception of the CsCl solutions, which is probably due to the small hydration ability of the Cs⁺ ion.     

磷钨杂多酸催化乙醇和乙酸酯化反应的研究

以多孔钛片为支撑体,制备了磷钨杂多化合物薄膜化催化剂。在膜催化器上,考察了薄膜化催化剂对乙醇和乙酸合成乙酸乙酯的催化性能。结果表明,薄膜化催化剂显著提高了催化活性;当n(乙醇)∶n(乙酸)=1.5∶1,原料流量2.55mL/h;在反应温度为110℃时,乙酸乙酯产率可达97%,且薄膜催化剂的处理很方便,不污染环境。     

膜分离活性污泥法在辣根废水处理中的应用

本文以处理辣根废水为例，介绍一种新的水处理方法-膜分离活性污泥法，并阐述了膜分离活性污泥法如何解决污泥膨胀问题以及传统活性污泥法所不具有的特性。     

制袋机薄膜速度传感方法与定长控制

提出了实现薄膜张力传感的薄膜速度传感方法,设计了基于ARM处理器和嵌入式实时操作系统的薄膜定长伺服控制系统。采用巧妙的机械变换技术实现薄膜长度变化的传感,从而建立具有线性特性的薄膜速度传感数学模型。采用ARM7 TDMI核心处理器和μC/OS-II嵌入式实时操作系统平台,研发了薄膜定长伺服控制系统。核心技术成功应用到双列中封高速制袋机的控制系统中,运行速度达到24000 P/h,成品率超过99.6%。     

Molecular dynamics studies of a model polymer-catalyst-carbon interface

Classical molecular dynamics simulations are performed to obtain insights into structural and dynamical behavior of water and O₂ transport through a model polymer membrane, and at the interface of such hydrated polymer with graphite-supported nanocatalyst platinum particles. Water clustering is observed near the membrane hydrophilic sites constituted by sulfonic groups, which due to their affinity with platinum, are located near the metallic surface. It is found that the diffusion of water through the model hydrated polymer membrane depends strongly on the level of membrane hydration due to contribution from various mechanisms whose relative weights change with the degree of hydration. Possible scenarios for O₂ diffusion are also analyzed.     

甲酸甲酯合成与转化的催化技术

本文评述了甲酸甲酯(MF)合成与转化的催化技术,展示了从MF出发发展C_1化学的可能途径,在MF的合成方面详细地分析了从甲醇出发的羰化法、脱氢法和氧化法催化技术,简介了我们的有关研究工作。