填料萃取塔液泛速度的计算

介绍了三种有代表性的填料萃取塔的液泛速度计算公式，并通过它们用于三种典型的液-液实验体系和两种不同填料的计算结果的比较，对这些公式的适用范围进行了讨论。     

用小尺寸R－CT试样研究核压力容器钢断裂韧性及与Charpy试样的比较

提出了一种用双边带深侧槽的小尺寸圆形紧凑拉伸试样评定核压力容器（ＲＰＶ）钢断裂韧性的单试作试验方法，给出了用该方法测定的两个厂家生产的核压力容器用Ａ５０８ＣＬ３钢的断裂韧性参数，还与Ｃｈａｒｐｙ试样的试验结果及大尺寸标准试样的试验结果进行了比较。研究结果表明：用双边带深侧槽的小尺寸Ｒ－ＣＴ试样测得的断裂韧性值比相同恻槽深度预制疲劳裂纹Ｃｈａｒｐｙ试样的测试值更接近有效断裂韧性值，所以，用于核压力容器断裂韧性的监测是可行的。     

TN-S系统接地方式中重复接地的探讨

通过对TN S系统接地方式中重复接地的探讨 ,介绍了重复接地对N线和PE线的不同作用 ,明确了TN S系统接地方式中重复接地的设计和施工方法。     

Selectivity of partial hydrogenation reactions performed in a pore-through-flow catalytic membrane reactor

The selectivity of partial hydrogenation reactions of unsaturated substrates was studied in a membrane reactor operating at 323 K and 40 bar hydrogen pressure. The reactor system was constructed as a loop of a saturation vessel and a membrane module in which the reaction mixture was resaturated with hydrogen up to 100 times. In a porous membrane made from cross-linked polyacrylic acid palladium nanoparticles were incorporated as catalysts. A well-defined residence time within the membrane was achieved due to a defined pore structure of the membrane and a convective mass flow of the reaction mixture through the membrane. The selectivity for the partially hydrogenated products was investigated as a function of the pore size of the PAA membrane and was compared to commercially available catalysts. Compared to experiments with supported catalysts (Pd/C and Pd/Al₂O₃) in a slurry and a fixed bed reactor the selectivity for the desired products could be increased by 3% (1-octyne) up to 40% (geraniol).     

Corroles as receptors in liquid membrane electrodes and their potentiometric response towards salicylic acid

Here, we report on the application of corroles as analytically active compounds in liquid membrane electrodes (ISE) that are sensitive towards salicylic acid and salicylate.The potentiometric signals generated by corrole-incorporated ISEs strongly depend on the pH of the aqueous sample solution and the membrane composition, such as the presence of lipophilic sites. Corrole incorporating ISEs are characterised by a low detection limit (4.0 × 10⁻⁵ M) and a wide linear range (4.0 × 10⁻⁵ to 5.3 × 10⁻³ M). Also, they are free from interference versus other organic anions.The mechanism of the generation of the potentiometric signals of corrole incorporating ISEs in the presence of salicylate anion, as well salicylic acid, will be discussed.     

软式操纵系统中张力调节器的设计研究

软式操纵系统是通过钢索张力来传递操纵力的,钢索张力的变化直接影响飞机的操纵性能。张力调节器就是使钢索在各种状态下保持张力恒定的一种调节装置。对张力调节器的原理、结构形式进行了综合论述,并结合设计实例来说明钢索张力调节器的设计过程及设计中各参数的选取原则。     

Flows in rectangular microchannels driven by capillary force and gravity

Capillary phenomena was studied and discussed by the scholars about 200 years ago, but the progress was slow due to the limited equipment and manufacture precision of the microchannel. In recent years, because of the rapid development of MEMS and micromachining, many applications of the capillary flow is widely developing in some modern processes, such as underfilling of flip chip, flow in microfluidic chip or biochip, and a variety of other fields.     

ISOFLUX膜——微滤膜极品

介绍一种新型的恒通量的微滤膜———ISOFLUX 膜 ,该种膜的膜通量衰减比通常的微滤膜要小得多 ,对ISOFLUX 膜的原理和数学模型进行了推导 ,并给出了对牛奶进行冷杀菌过滤的结果 .     

浸入凝胶法聚合物膜形成机理的研究现状

从热力学、传质动力学、相分离机制和固化过程几方面综述了浸入凝胶过程中聚合物膜形成机理的研究现状 .指出浸入凝胶成膜过程是传质交换和由传质交换引发的相分离以及其后的固化过程之间相互竞争的复杂非平衡过程 ,膜结构是上述几个过程竞争的结果     

Strength of Metals at High Strain Rates

Results of metal testing in impact tension–compression and indentation are analyzed. As the analysis of these data demonstrates, the strength of metals increases greatly with strain rates and at moderate indentation rates. At high indentation rates, a decrease in the specific energy (per unit volume of a displaced material) necessary for the formation of a conical cavity was observed. The account of the effects of viscosity, temperature increase upon plastic deformation and its localization can be used to explain the above phenomena.