湿硫化氢环境下的球罐腐蚀状况分析

在湿硫化氢环境下 ,尤其储存介质中的硫化氢含量超标时 ,很容易对储存容器壳体 (含焊缝和母材 )造成硫化氢应力腐蚀或氢鼓包。作者较仔细分析了 1 0 0 0m3 丙烯球罐产生硫化氢应力腐蚀开裂和40 0m3 LPG球罐产生氢鼓包的原因。提出了此类设备在设计选材、设备制造、施工安装和使用维护等环节应注意的问题。     

Using bald eagles to indicate the health of the Great Lakes' environment

The bald eagle (Haliaeetus leucocephalus) is one of the most studied birds of North America, and a great amount of natural life‐history information, including the response of various stressors on the eagles' ability to reproduce, are well known. In Michigan, the eagle has been chosen to track the trends of bioaccumulative compounds of concern across watersheds in the state. The state has been divided into major watersheds, and 20% of these are surveyed each year. A control area in northern Minnesota, Voyageurs National Park, is also sampled annually. We report here on the methods used, the preliminary results of the 1999 field season, and how differences in mercury concentrations varied over a 10‐year period. Mercury in feathers of nestling eagles declined over time only in Lakes Michigan and Huron, but have not decreased among other subpopulations in Michigan. Concentrations of polychlorinated biphenyls (PCBs) and 4,4′‐DDE in blood plasma from nestling eagles have declined over time for most subpopulations; however, they remain greater for breeding areas associated with the Great Lakes' food web. Sea eagles of the genus Haliaeetus are a good sentinel species to track trends in bioaccumulative compounds in aquatic systems.     

纳米颗粒的测量与表征

介绍了用于纳米颗粒测量的电镜观察法、X射线衍射线宽法、激光粒度分析法、比表面积法、颗粒沉降法、扫描探针显微术以及小角X射线散射等,并对其测量原理、测量过程、适用范围及测量方法的优缺点进行了讨论。     

固定化微生物脱除工业酸性废气中H_2S的研究

以H 2软性填料作为氧化亚铁硫杆菌的固定化载体 ,构成了固定床生物反应器。在一定操作条件下 ,考察了固定床生物反应器对Fe2 +的氧化速率 ,最大可达 7.6 7g/ (L·h)。并对固定床生物反应器运行中在载体表面形成的络合物进行了研究 ,X射线衍射证明此络合物为黄钾铁矾 [KFe3(SO4 ) 2 (OH) 6]。     

Single and matrix HgCdTe photovoltaic detectors

The recent researches and technological developments of middle and long wavelength infrared HgCdTe photovoltaic detectors are presented. Structure, topology, design and performance of HgCdTe photodiodes, silicon readout electronics, Focal Plane Arrays both staring and time delay and integration types, thermal imagers are discussed. Negative differential conductance, bistability and high frequency oscillations under background infrared radiation in HgCdTe photodiodes are reported.     

A Nonvolatile Organic Memory Device Using ITO Surfaces Modified by Ag‐Nanodots

We report on a single‐layer organic memory device made of poly(N‐vinylcarbazole) embedded between an Al electrode and ITO modified with Ag nanodots (Ag‐NDs). Devices exhibit high ON/OFF switching ratios of 10⁴. This level of performance could be achieved by modifying the ITO electrodes with some Ag‐NDs that act as trapping sites, reducing the current in the OFF state. Temperature dependence of the electrical characteristics suggest that the current of the low‐resistance state can be attributed to Schottky charge tunnelling through low‐resistance pathways of Al particles in the polymer layer and that the high‐resistance state can be controlled by charge trapping by the Al particles and Ag‐NDs.     

Simultaneous sulfide and acetate oxidation under denitrifying conditions using an inverse fluidized bed reactor

BACKGROUND: Simultaneous removal of sulfur, nitrogen and carbon compounds from wastewaters is a commercially important biological process. The objective was to evaluate the influence of the CH₃COO^?/NO₃^? molar ratio on the sulfide oxidation process using an inverse fluidized bed reactor (IFBR). RESULTS: Three molar ratios of CH₃COO^?/NO₃^? (0.85, 0.72 and 0.62) with a constant S^2?/NO₃^? molar ratio of 0.13 were evaluated. At a CH₃COO^?/NO₃^? molar ratio of 0.85, the nitrate, acetate and sulfide removal efficiencies were approximately 100%. The N₂ yield (g N₂ g^?1 NO₃^?‐N consumed) was 0.81. Acetate was mineralized, resulting in a yield of 0.65 g inorganic‐C g^?1 CH₃COO^?‐C consumed. Sulfide was partially oxidized to S⁰, and 71% of the S^2? consumed was recovered as elemental sulfur by a settler installed in the IFBR. At a CH₃COO^?/NO₃^? molar ratio of 0.72, the efficiencies of nitrate, acetate and sulfide consumption were of 100%, with N₂ and inorganic‐C yields of 0.84 and 0.69, respectively. The sulfide was recovered as sulfate instead of S⁰, with a yield of 0.92 g SO₄^2?‐S g^?1 S^2? consumed. CONCLUSIONS: The CH₃COO^?/NO₃^? molar ratio was shown to be an important parameter that can be used to control the fate of sulfide oxidation to either S⁰ or sulfate. In this study, the potential of denitrification for the simultaneous removal of organic matter, sulfide and nitrate from wastewaters was demonstrated, obtaining CO₂, S⁰ and N₂ as the major end products. Copyright © 2008 Society of Chemical Industry     

Sensitometric characteristics of an all‐solid‐state photoelectrochromic pixel for an electrochromic light‐addressable display

Abstract— An all solid‐state photoelectrochromic element (PECE) was developed on the basis of electrochromic layers of WO₃ and polyaniline with a layer of polymer electrolyte placed on a base of polyamidosulfoacid, in which a thin‐film CdS_xSe_1?x photoresistor was used as an electronic key. The dependence of the sensitometric characteristics of the PECE on the applied voltage was studied.     

Synthesis of selenium nanoparticles in the presence of silk fibroin

This paper describes a solution-phase approach to the synthesis of selenium nanoparticles by reducing selenious acid solution with ascorbic acid in the presence of silk fibroin. The monodispersed spherical selenium colloid particles obtained were very stable in silk fibroin solution and characterized by Atomic force microscopy and X-ray techniques. The influences of temperature and ultrasonication on the morphology of selenium nanoparticles were also discussed. The experiments showed that the selenium nanoparticles with various morphologies could be obtained under different temperatures and the appropriate ultrasonication time was 60 min. This result indicated that the silk fibroin molecules intimately associated with the surface of the selenium particles and controlled the growth particles.     

钻井过程中硫化氢的处理工艺

目的：防止钻井过程中出现的硫化氢对人身安全和钻具造成危害。方法：分析氢脆破坏机理和处理硫化氢的化学原理。结果：提出了处理硫化氢的关键技术，并结合塔中162井的实钻经验，总结出了钻井过程中对硫化氢的几点认识。结论：提高泥浆pH值、加入除硫剂及提高泥浆密度等措施是钻井过程中处理硫化氢的关键技术，从而有利于富含硫化氢的灰岩、白云岩等裂缝性油气藏的钻井生产。