甲醇/正己烷的渗透汽化分离的研究 Ⅰ.渗透汽化膜的研制

本文研制了从甲醇／正己烷体系中分离甲醇的渗透汽化复合膜ＣＡ／ＰＡＮ（ＰＥＳ）、ＰＶＡ／ＰＡＮ（ＰＥＳ）。实验证明膜对该体系有较高的选择分离性和良好的渗透性，当进料甲醇浓度为３％时，渗透通量Ｊ≈０．６００ｋｇ／ｈ·ｍ２，分离因子α→∝。本文还考察了不同操作条件对膜分离性能的影响及膜的稳定性和均匀性。     

EXAFS and XPS Investigations of Cu/ZnO Catalysts and Their Interaction with CO and Methanol

Several investigations have been carried out on Cu/ZnO catalysts by employing extended Xray absorption fine structure (EXAFS) and Xray photoelectron spectroscopy (XPS). EXAFS investigations of Cu/ZnO catalysts subjected to hydrogen reduction show the presence of Cu¹⁺ species and Cu microclusters. The proportion of Cu¹⁺ depends on the rate of increase of the reduction temperature and on the amount of alumina added. An XPS study of the interaction of CO with model Cu/ZnO catalysts prepared in situ in the electron spectrometer shows the formation of CO₂ ^-, CO₃ ^2- and C₂O₄ ^2- species, their proportion relative to CO increasing with the Cu¹⁺/Cu⁰ ratio. A study of the interaction of CH₃OH with Cu clusters deposited on ZnO films reveals reversible molecular adsorption and the formation of CH₃O on clean Cu clusters. If the Cu clusters are pretreated with oxygen, however, both CH₃O and HCOO^- species are produced. Model Cu/ZnO catalyst surfaces containing both Cu¹⁺ and Cu⁰ species show interesting oxidation properties. On a Cu⁰-rich catalyst surface, only the CH₃O species is formed on interaction with CH₃OH. On a Cu¹⁺rich surface, the HCOO^- ion is the predominant species.     

天然气年产4万吨甲醇联产年产2.5万吨合成氨代替重油设计

利用现生产重油制氨的1000m~3(V_n)(O_2)/h空分,建设天然气并联换热蒸汽转化串纯氧部分氧化制甲醇和氨两用合成气,成为4万吨/年甲醇联产2.5万吨/年氨的生产单元组合,既节能节气、降低投资和生产消耗及成本,又充分利用现有设备发挥生产能力,同时还可增加产品和产量。     

C307型中低压甲醇合成催化剂的工业应用

简述了德士古水煤浆气化工艺流程及设备,介绍了C307型甲醇合成催化剂的物化性能及装填情况,主要介绍了该催化剂在兖矿鲁南化肥厂的前期使用情况,并对使用结果进行了评价,C307甲醇合成催化剂低温活性好、选择性好、低还原收缩率、副产物少,经济效益显著。     

全球甲醇工业生产现状与发展趋势

综述甲醇工业技术现状,分析目前国内外甲醇工业的生产发展情况,未来3～5a国内甲醇装置将供过于求,建议控制国内甲醇装置建设过热的势头,提出加快甲醇下游生物产品的开发步伐.     

清液体系中高性能T型沸石分子筛膜的合成

由摩尔组成为SiO2:Al2O3:Na2O:K2O:H2O=1:0.015:0.25:0.08:25的澄清溶液,在预涂晶种的管状莫来石支撑体上水热合成T型沸石分子筛膜.在高于100℃清液体系中合成出了高性能T型沸石分子筛膜.用X射线衍射(X-ray diffraction,XRD)仪和扫描电子显微镜(scanning electron microscope,SEM)对150℃下合成35 h的分子筛膜进行了表征.XRD谱表明:T型沸石分子筛成功地生长在预涂晶种的支撑体上.支撑体的外表面覆盖着20 μm厚有取向的晶体层.从SEM照片判断,起到分离作用的是生长致密的中间层,而不是表层.在150℃下制备的膜,对水/乙醇、水/异丙醇混合物具有高渗透汽化分离性能.优异的渗透汽化性能归因于在涂有晶种的多孔支撑体上生长了一层高结晶度且缺陷较少的T型沸石分子筛晶体层.     

ZrO2 和Al2O3支撑的MFI 型沸石分子筛膜:支撑体材料对膜性能的影响

采用水热合成法，以纯SiO2为源物质，在介孔Y2O3掺杂的ZrO2(YZ)及大孔α-Al2O3支撑体上制备出高质量的MFI型沸石分子筛膜，通过H2／n-C4H10气体混合物的渗透分离和p-xylene的蒸发研究了不同支撑体上MFI型沸石分子筛膜分离性能，在较低温度范围，YZ支撑的MFI型沸石分子筛膜中n-C4H10的渗透率比Al2O3支撑的膜高很多，最大n-C4H10与H2的分离率达到500，Al2O3支撑的膜中py-xylene的蒸发流量随时间下降很快，而YZ支撑的膜中的蒸发流量则变化缓慢，用XRD对膜的晶体结构进行分析，通过多种温度下热处理不同支撑体上的膜样品研究了其热稳定性与支持体材料的关系，YZ支撑的MFI型沸石分子筛膜的MFI结构在1000摄氏度后仍能保持，而Al2O3支撑的膜950摄氏度时已完全转变为石英相，研究结果表明，YZ支撑的MFI型沸石分子筛膜比Al2O3支撑的膜表现出更好的厌不性，热稳定性以及抗阻塞性。     

Heterogeneously assisted oxidation of adsorbates from carbonmonoxide, methanol and ethanol by hydrogen peroxide solutions on platinum electrodes in sulphuric acid

The influence of hydrogen peroxide on the adsorption and oxidation of carbon monoxide, methanol and ethanol adlayers on porous Pt electrodes were studied in 2 M sulphuric acid solution by means of cyclic voltammetry and differential electrochemical mass spectrometry (DEMS). The oxidation of adsorbed species is observed at electrode potentials far less negative than those required for electrochemical adsorbate oxidation. The oxidation by H₂O₂ is dependent on its concentration in solution, as well as on the adsorbates and their coverages. In all cases the isolated adlayers are oxidised by dissolved H₂O₂. However, the presence of H₂O₂ during adsorption partially inhibits adlayer formation from CH₃OH and C₂H₅OH, but avoids almost completely the adsorption of carbon monoxide. The removal of the residues from the surface by dissolved hydrogen peroxide probably occurs through O_ad species formed during the heterogeneous decomposition reaction of H₂O₂ on Pt.     

Electrooxidation of methanol at platinum–ruthenium catalysts prepared from colloidal precursors: Atomic composition and temperature effects

The electrocatalytic oxidation of methanol was investigated on PtRu electrodes of different atomic compositions at several temperatures (from 25 to 110 °C). Very active catalyst nanoparticles supported on active carbon (Vulcan XC 72) were obtained using the colloidal synthesis developed by Bönnemann et al. [11], allowing easy variation of the atomic composition. These electrocatalysts were characterized by TEM, EDX and XRD; results indicate that they consist of platinum nanoparticles decorated by ruthenium. Methanol oxidation was studied as a function of composition, temperature and methanol concentration. Two effects were investigated: the effect of the working temperature and the effect of the atomic composition. It appeared that for lower methanol electrooxidation overvoltages, the best catalysts are ruthenium-rich, whereas at higher overvoltages the best one is the Pt + Ru (80:20)/C composition, irrespective of the working temperature, either in half-cell or in a single DMFC.     

A highly stable and efficient catalyst for direct synthesis of LPG from syngas

Liquefied petroleum gas (LPG) fuel was directly synthesized from syngas over a hybrid catalyst which contained a methanol synthesis catalyst and zeolite. The new hybrid catalyst composed of (Pd–Ca/SiO₂) and β-zeolite, showed a high activity and selectivity for LPG production. X-ray diffraction (XRD) characterization of the catalyst was used to analyze the deactivation of (Pd–Ca/SiO₂)/β-zeolite.