药物中间体2-[(2′-氰基联苯-4-基)甲基氨基]-3-硝苯甲酸乙酯的制备

本文介绍了以3-硝基-2-叔丁氧甲酰氨基苯甲酸乙酯为原料，在碱性条件下与4-(2-氰基苯基)-1-溴甲苯发生亲核取代反应制备2-[(2′-氰基联苯-4-基)甲基氨基]-3-硝苯甲酸乙酯的方法，产品经核磁共振验证其结构，产品收率达83％。本合成工艺条件温和，适合工业化生产。     

Preparation of glycol derivatives of partially hydrogenated soybean oil fatty acids and their potential as lubricants

Glycol diesters and mixtures of mono- and diesters have been prepared from methyl esters of partially hydrogenated soybean oil fatty acids and diethylene, dipropylene, neopentyl and triethylene glycols. The catalyst used in these reactions was a mixture of calcium acetate/barium acetate (3∶1, w/w). The reactions were carried out under nitrogen with 0.5% catalyst at temperatures in the range of 190–275°C. Borated esters of mixed mono- and diesters were prepared with 0.33 equivalent of boric acid per 1.0 equivalent hydroxyl group on the ester. Refractive indices, viscosities, and flash and fire points were determined for diesters, mixed mono- and diesters, and mixed diesters and borated esters. The viscosities, flash points and fire points indicate that these esters can be used as a component of lubricating oils. Wear-prevention characteristics of mixed diesters and borated esters indicated that they can be used as antifriction additives in lubricating oils. Lecture presented at the joint meeting of the International Society for Fat Research and the American Oil Chemists' Society in Toronto, May 10, 1992.     

一步法合成5-甲基海因

以氰化钠、碳酸铵、乙醛等为原料，常压下一步反应得到５甲基海因，总收率７０２％。其最佳操作条件为：反应温度７５℃，反应时间３ｈ，原料碳酸铵与氰化钠之比为２∶１，酸化回流ｐＨ值为２，酸化回流时间２ｈ。     

中国有机硅工业的发展空间

从中国的甲基氯硅烷建设热、金属硅对甲基氯硅烷生产的影响、下游产品的布局和发展、提高企业自主创新能力和知识产权保护意识、加强企业与．研究机构的合作、建立以企业为主体、产学研相结合的技术创新体系等几个侧面对中国有机硅工业的现状、存在问题及发展空间等进行了初步探讨。     

高选择性合成1-甲氧基-2-丙醇固体催化剂的筛选和催化作用

对碱土金属氧化物和两性氧化物等10种氧化物作为合成1 甲氧基 2 丙醇固体催化剂进行了催化性能筛选。发现在碱土金属氧化物MgO、CaO和BaO中,中强碱MgO具有较高的环氧丙烷(PO)转化率(71 07%)和1 甲氧基 2 丙醇(PPM)选择性(92 53%)。在两性氧化物中,ZnO具有较高的PO转化率(55 26%)和PPM选择性(92 37%)。系统考察了反应温度、催化剂用量、反应时间和原料摩尔配比对MgO、ZnO的催化作用特点的影响,发现MgO在催化性能和1 甲氧基 2 丙醇选择性方面表现出的综合性能优于其他催化剂。     

苯和二异丙苯烷基转移化反应的研究

研究了二异丙苯转移烷基化反应中，催化剂配制条件等因素对反应的影响，对均相条件下的二异丙苯转移烷基化反应动力学进行了研究，得到了反应动力学方程。     

A rapid test to measure performance,emission and wear of a diesel engine fueled with palm oil diesel

Results of performance, emission and tribological evaluations of palm oil methyl ester and its blends with conventional diesel in an automobile diesel engine test bed are presented. Polymerization and carbon deposits on the fuel injector were monitored. CO, CO₂, O₂, combustion efficiency and temperature of exhaust gases were also measured. Palm oil methyl ester and its blends have great potential as alternative diesel fuel. Performance and exhaust gas emission for palm oil methyl ester and its blends with conventional diesel are comparable with those of conventional diesel fuel. Palm oil methyl ester does not pose a severe environmental problem and will not deteriorate engine and bearing components.     

PPESK／PS共混物流变性能的研究

以溶液共沉淀的方法制备了含二氮杂萘联本结构的聚芳醚砜酮（PPESK）。聚苯乙烯（PS）共混物，用毛细管流变仪测定了共混物的流为性能。结果表明，在本实验条件下，PPESK／PS共混物熔体属假塑性非牛顿汉体，其熔体粘度随PS含量的增加、温度的升高、剪切速率的增大而下降。PS的加入有利于改善PPESK的熔融加工流动性。     

特种工程塑料聚芳醚酮

介绍了聚芳醚酮的发展概况、分类及其物化性能;重点对PEEK的性能及应用进行详细阐述;概述了PEEK 的最新研究成果,并指出其今后发展趋势。     

除草剂噻磺隆的合成

报道了以氯甲酸甲酯和2-甲氧羰基-3-氨基磺酰基噻吩为起始原料合成除草剂噻磺隆的方法。原料2-甲氧羰基-3-氨基磺酰基噻吩与氯甲酸甲酯生成2-甲氧羰基-3-甲氧羰基氨基磺酰基噻吩,再与2-氨基-4-甲氧基-6-甲基均三嗪反应生成噻磺隆。避免了异氰酸酯路线的种种缺点,具有收率高、含量高、成本低的特点。以2-甲氧羰基-3-氨基磺酰基噻吩计,总收率为77.73%,原药纯度达93.6%。