Small-angle neutron scattering from branched epoxide resins

Small-angle neutron scattering experiments in the range of q² from 0.01 to 25 nm⁻² have been carried out on branched epoxide resins based on bisphenol-A at the Institute Laue—Langevin (I.L.L) in Grenoble (q=(4π/λ) sin(θ/2)). Measurements were made with six samples in the range of M_W from 1500 to 19 000 and four concentrations between 1.3 and 10% (w/w) in deuterated diglyme. The results are as follows: (i) The mean square radius of gyration follows a relationship S²_z=4.69×10⁻⁴M^1.20_W (nm²). (ii) In all cases fairly large second virial coefficients A₂ are obtained which, however, decrease strongly with molecular weight. Above M_W=2500, the virial coefficient follows the relationship A₂=1.6M^−0.85_W (mol cm³g⁻²). (ii) The reciprocal particle scattering factor as a function of q² exhibits only a slight upturn and otherwise shows the behaviour of a randomly branched polycondensate. The slight upturn is discussed as being caused by the finite volume of the monomeric unit. Possible reasons for the high exponent in the S²_z versus M_W dependence are briefly discussed.     

环氧胶粘剂增韧改性研究进展

概述了关于近些年环氧树脂以及环氧树脂胶粘剂增韧改性的研究进展情况,简单地介绍了以无机刚性填料(颗粒)增韧改性环氧胶粘剂的情况,比较详细地叙述了以橡胶弹性体和热塑性树脂增韧改性环氧胶粘剂的一些重要研究情况及相关的增韧机理,指出了国内外之间环氧胶粘剂发展的差距,同时提出了环氧胶粘剂将来的重点和发展趋势。     

Internal fracture of notched epoxy resins

The brittle fracture of round-notched epoxy resin bars subjected to plane strain bending has been studied at varying strain rates. Observations of fracture processes and surface morphologies revealed that the internal crack was nucleated at the plastic-elastic boundary when the plastic deformation zone at the notch root reached a certain size. A slip-line field theory allows calculation of the stress components at the plastic-elastic boundary from a knowledge of the location of the internal crack. An analysis of the data concluded that the triaxial stress level ahead of the plastic zone was raised by plastic constraints to an ideal fracture stress which is considerably larger than that of glassy thermoplastics.     

Vernonia oil–based acrylate and methacrylate polymers and interpenetrating polymer networks with epoxy resins

Acrylate and methacrylate monomers were obtained by reacting vernonia oil, a naturally epoxidized oil, with acrylic or methacrylic acid. The highest conversion (85–98%) of epoxy groups was obtained when the reaction was performed with an excess of the carboxylic acid at 100–120°C. The acrylate and methacrylate monomers of vernonia oil were characterized by IR and NMR spectroscopy. These monomers were then cured by sunlight in the presence of benzophenone to produce transparent films. In addition, interpenetrating polymer neworks (IPNs) were prepared in a two‐step technique from the sunlight‐cured methacrylate of vernonia oil, as the elastomeric component, in combination with a cured epoxy resin (a bisphenol A–type resin). Dynamic mechanical analysis showed good compatibility between the networks of the two cured polymers. An IPN with a 1 : 1 composition of the two polymer components exhibited the properties of a reinforced elastomer. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3835–3843, 2004     

Moisture absorption behavior of rubber‐modified epoxy resins

The moisture absorption behavior of diglycidyl ether of bisphenol A/ethylene diamine resins incorporating a carboxy‐terminated butadiene–acrylonitrile rubber was investigated and associated with their morphology of phase separation. Although the diffusion coefficient of moisture was increased with the rubber content, its activation energy and free volume for moisture diffusion were barely changed until phase inversion occurred. After phase inversion, the free volume was significantly increased, and the activation energy decreased. In addition, the moisture absorption also reduced the β‐transition temperature of the resins and slightly increased the glass‐transition temperature before phase inversion. However, the reverse was found after phase inversion. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3718–3724, 2002     

Reactivity,chemical structure,and molecular mobility of urea–formaldehyde adhesives synthesized under different conditions using FTIR and solid‐state 13C CP/MAS NMR spectroscopy

This study was conducted to investigate the effects of reaction pH condition and hardener type on the reactivity, chemical structure, and molecular mobility of urea–formaldehyde (UF) resins. Three different reaction pH conditions, such as alkaline (7.5), weak acid (4.5), and strong acid (1.0), were used to synthesize UF resins, which were cured by adding four different hardeners (ammonium chloride, ammonium sulfate, ammonium citrate, and zinc nitrate) to measure gel time as the reactivity. FTIR and ¹³C‐NMR spectroscopies were used to study the chemical structure of the resin prepared under three different reaction pH conditions. The gel time of UF resins decreased with an increase in the amount of ammonium chloride, ammonium sulfate, and ammonium citrate added in the resins, whereas the gel time increased when zinc nitrate was added. Both FTIR and ¹³C‐NMR spectroscopies showed that the strong reaction pH condition produced uronic structures in UF resin, whereas both alkaline and weak‐acid conditions produced quite similar chemical species in the resins. The proton rotating‐frame spin–lattice relaxation time (T_1ρH) decreased with a decrease in the reaction pH of UF resin. This result indicates that the molecular mobility of UF resin increases with a decrease in the reaction pH used during its synthesis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 2677–2687, 2003     

改善高吸水树脂性能的主要技术方案

文章介绍了盐的存在对高吸水树脂吸水性能的影响，重点论述了提高高吸水树脂耐盐性、吸水速度和吸水后水凝胶强度的技术方案。     

Effect of Resins on Asphaltene Self‐Association and Solubility

In previous studies, asphaltenes and resins have been treated as two distinct fractions of a crude oil. The asphaltenes were assumed to be the only self‐associating fraction. However, there is evidence that resins also participate in this self‐association. In this study, molar masses of mixtures of asphaltenes and resins were measured with vapour pressure osmometry. Precipitation from the same mixtures dispersed in solutions of toluene and pentane were also measured. The data were modelled with previously developed self‐association and precipitation models. Model results with asphaltenes and resins characterized as a single distribution and as individual components are compared. The data and the modelling suggest that asphaltenes and resins are better characterized as a single distribution of self‐associating components.     

Toughening of cycloaliphatic epoxy resins by poly(ethylene phthalate) and related copolyesters

Poly(ethylene phthalate) (PEP) and poly(ethylene phthalate–co‐ethylene terephthalate) were used to improve the brittleness of the cycloaliphatic epoxy resin 3,4‐epoxycyclohexylmethyl 3,4‐epoxycyclohexane carboxylate (Celoxide 2021?), cured with methyl hexahydrophthalic anhydride. The aromatic polyesters used were soluble in the epoxy resin without solvents and effective as modifiers for toughening the cured epoxy resin. For example, the inclusion of 20 wt % PEP (MW, 7400) led to a 130% increase in the fracture toughness (K_IC) of the cured resin with no loss of mechanical and thermal properties. The toughening mechanism is discussed in terms of the morphological and dynamic viscoelastic behaviors of the modified epoxy resin system. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 388–399, 2002; DOI 10.1002/app.10363     

Glucamine-based gemini surfactants II: Gemini surfactants from long-chain <Emphasis Type="Italic">N</Emphasis>-alkyl glucamines and epoxy resins

Gemini surfactants were synthesized by reaction of long-chain N-alkyl glucamines with epoxy resins. Analogous to the synthesis of gemini surfactns from long-chain N-alkyl glucamines and α, ω-diepoxides (1), the reaction in methanol at 70°C could be used to convert the starting materials selectively and almost quantitatively. N-Octyl glucamine, N-decyl glucamine, and N-dodecyl glucamine were combined with several epoxy resins, mainly technical glycidyl ethers of diols. Syntheses involving equimolar amounts of amine resulted in quantitative conversion of the epoxy resins, and epoxide and products could be isolated quantitatively by removing the solvent. Gemini surfactants having hydrophobic or hydrophilic spacers were preparared according to their structures and the hydrophilic properties of the epoxy resin. Surface tensions were measured, and foaming propertiers were examined to characterize surface-active properties of these surfactants. The more hydrophilic products were of particularly high surface activity. Tensiometric studies showed a reduction of surface tension to 30–34 mN/m and critical micelle concentrations in the range of 2–35 mg/L. Comparison of gemini surfactants from long-chain N-alkyl glucamines and diepoxides of α,ω-diolefins (chain lengths: C₈, C₉, C₁₀, and C₁₄) with those based on epoxy resins showed similar or lower surface activities using hydrophobic epoxy resins and much better surface-active properties using hydrophilic epoxy resins (e.g., based on glycerol). This, together with the easier availability, makes the epoxy resin-based products interesting surfactants. Products having very good surface-active properties are available, especially using glycidyl ether of aliphatic diols or glycerol.