不锈钢上激光熔敷涂层结构特征与质量研究

采用5kW连续CO2激光器对经等离子喷涂的NiCoCrAlY结合层和ZrO2陶瓷层进行二次重熔处理，并利用金相显微镜、扫描电镜、电子探针和显微硬度计对激光熔敷涂层进行了显微结构、元素分布以及显微硬度观察与测试，结果表明：多道搭接工艺能降低熔敷涂层气孔率，ZrO2陶瓷层稀释度低，与基体结合完好，并观察到NiCoCrAlY合金层中存在明显的对流图案，加入了TiO2-Al-Ti添加剂的ZrO2陶瓷层激光重熔后得到了无裂纹的定向生长柱状晶，并且呈现一次枝晶平均间距为2．3μm的表层和平均间距为3．8μm的次表层结构。     

后热处理对新型马氏体耐热钢焊缝性能的影响

针对电力施工过程中对具有冷裂倾向的马氏体型耐热钢焊后后热处理时机选择与标准存在差异，即是否必要在冷却至100-120℃恒温一段时间后再进行后热处理的问题，安排了一系列的试验对后热处理的最佳时机予以讨论，对热处理后的焊缝组织进行力学性能试验和金相分析，对冲击后的试样进行了断口分析。试验证明，后热处理时机的不同对马氏体耐热钢焊缝冲击韧度有比较大的影响，马氏体耐热钢的后热处理应在马氏体转变完全后开始较为合适。     

Surface modification of starch nanocrystals through ring‐opening polymerization of ε‐caprolactone and investigation of their microstructures

Bionanoparticles of starch obtained by submitting native potato starch granules to acid hydrolysis conditions. The resulted starch nanoparticles were used as core or macro initiator for polymerization of ε‐caprolactone (CL). Starch nanoparticle‐g‐polycaprolactone was synthesized through ring‐opening polymerization (ROP) of CL in the presence of Sn(Oct)₂ as initiator. The detailed microstructure of the resulted copolymer was characterized with NMR spectroscopy. Thermal characteristic of the copolymer was investigated using DSC and TGA. By introducing PCL, the range of melting temperature for starch was increased and degradation of copolymer occurred in a broader region. X‐ray diffraction and TEM micrographs confirmed that there was no alteration of starch crystalline structure and morphology of nanoparticles, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of the graft yield of maleic anhydride on the rheological behaviors,mechanical properties,thermal properties,and free volumes of maleic anhydride grafted high‐density polyethylene

The rheological behavior, thermal properties, and molecular mobility of a series of maleic anhydride (MA) grafted high‐density polyethylenes were characterized and evaluated. The rheological behavior was studied with a Haake minilaboratory. The viscosity of the samples in their melt state decreased with an increase in the graft yield, and this could be attributed to the higher molecular mobility for samples with a higher degree of grafting. The thermal properties were investigated with dynamic mechanical analysis and differential scanning calorimetry. Positron annihilation lifetime measurements were used to study the effect of the degree of grafting on the chemical environment and the atomic‐scale free‐volume properties. It was found that the grafted MA group played a significant chemical inhibition role in positronium formation when the graft yield was low. The results also indicated that the higher the degree of grafting was, the broader the free‐volume distribution was. The relationship between the microstructure and rheological behavior is discussed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Epoxidation of high trans‐1,4‐polyisoprene and its properties

A new organic‐solvent‐free water‐phase suspension method was used to synthesize partially epoxidized high trans‐1,4‐polyisoprene (TPI) to improve its properties, including oil resistance and wet‐skid resistance. The epoxidation was conducted in an aqueous peracetic acid solution and on the TPI granules prepared by a bulk precipitation method with supported titanium catalyst. The effects of the synthesis conditions, including reaction temperature, reaction time, and pH value, on the epoxy content were investigated. Epoxidized trans‐1,4‐polyisoprene (ETPI) with epoxy contents between 10 and 80% were obtained within 4 h. Both the amorphous and crystalline regions of TPI were epoxidized. The crystallization properties decreased with increasing epoxy content. ETPIs possessed lower mechanical properties than TPI but could be enhanced by vulcanization. The oil resistance and wet‐skid resistance were significantly improved after epoxidation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

NMR studies of poly(2-hydroxy ethyl methacrylate-co-2-vinyl pyridine)

Copolymers of 2-hydroxy ethyl methacrylate-2-vinyl pyridine (H/V) of different composition were synthesized by free radical bulk polymerization using azobisisobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The copolymer compositions were calculated from ¹H NMR spectra. The reactivity ratios for H/V copolymers obtained from a linear Kelen-Tudos method (KT) and nonlinear error-in-variables method (EVM) are r_H = 0.50 ± 0.10, r_V = 1.04 ± 0.08 and r_H = 0.55, r_V = 1.06 respectively. The complete spectral assignment of methine, methylene, methyl, carbonyl, and aromatic carbon regions in term of compositional and configurational sequences of H/V copolymers were done with the help of ¹³C{¹H} NMR, distortionless enhancement by polarization transfer (DEPT), two-dimensional heteronuclear single quantum coherence (HSQC) along with total correlated spectroscopy (TOCSY). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

2197铝锂合金的组织和性能

通过力学性能测试和显微组织观察研究了2197合金组织和性能之间的关系。结果表明,2197合金具有中等强度,小的各向异性,强的热稳定性。该合金在T8状态下能获得最佳的强度和塑性配合,在T6峰时效状态以析出少量δ′相、θ′相和T_1相联合强化为主。在2197合金的相组成中,T_1相析出数量不占主导地位,Al_6Mn弥散质点的析出有利于减小各向异性。2197合金中Li含量较低,使其呈现较强的热稳定性。     

粉末冶金低合金钢的制备和性能研究进展

从粉末制备、成形工艺、烧结工艺和组织控制等方面,系统的介绍了国内外粉末冶金低合金钢的制备技术,并对其研究方向和应用前景进行了展望。     

Investigation of the Correlation between Texture and Microstructure on a Submicrometer Scale in the TEM

In recent years the investigation of local texture and microstructure by analysis of electron backscatter diffraction patterns (EBSP) in the SEM has become a very powerful and popular method. With the introduction of SEM with field emission guns (FEG) the spatial resolution of EBSP measurements could be enhanced from 500 nm with a tungsten emitter to better than 50 nm. This evolution of SEM techniques raises the question whether transmission electron microscopy (TEM) still has fields of application in texture research. The present article answers this question with a clear “yes” and presents three examples of investigations where TEM is indispensable. The three examples comprise the investigation of the correlation between dislocation structure and deformation texture, a study on nucleation mechanisms of recrystallization in highly deformed metals and the investigation of microtexture and microstructure in nanocrystalline materials. Together with the presentation of these cases some of the necessary measurement techniques are described briefly. It is shown that TEM has to be applied when highest spatial resolution of orientation determination and imaging and high accuracy of orientation determination are to be reached, when the three‐dimensional and quantitative characterization of lattice defects is required or when materials with a high density of lattice defects are to be investigated.     

T(x) phase diagram of the Cu2Se-Al2Se3 system

Twenty alloys of various compositions in the Cu₂Se-Al₂Se₃ system were prepared and investigated. The T(x) phase diagram of the Cu₂Se-Al₂Se₃ system was obtained from x-ray diffraction, differential thermal analysis, and microstructure investigation for the first time. The homogeneity region of the CuAlSe₂ semiconducting compound was established. Previous articles by this author were presented with the spelling of his name as B.V. Korzun.