Polyethylene mixed crystal infra-red spectroscopy: The influence of matrix isotopic species on guest conformation

The chain conformation of solution-crystallized polyethylene has previously been confirmed by infra-red spectroscopy, using the CD₂ bending bandshape for samples with a minority of the deuterated species^1–3. The method of calculating the i.r. band profile from molecular conformational models is now developed to give a more accurate representation of doublet splittings and to include the singlet component. The CH₂ bending profile is calculated for samples with a deuterated matrix, and the good agreement with experimental data indicates that the same molecular model is applicable for samples with the deuterated polymer as either guest or matrix, for identical crystallization conditions. This result implies that isotopic fractionation is unimportant under these conditions.     

云2-平1多台阶变方位水平井钻井液技术

云2-平1井是位于复杂断块油气田上的一口中曲率半径水平井,水平段长820.86 m,水平段多台阶、方位角变化幅度大(29.6°),井下摩阻大,钻井液的携砂、润滑及防卡能力是该井钻井成功的关键。该井选用有机正电胶-聚合物钻井液体系,用高分子量聚合物胶液进行维护,以提高体系的悬浮携岩及防塌能力,通过加入液体磺化沥青、原油及与之相配伍的固体乳化剂来提高润滑性,配合良好的四级固控设备及时清除有害固相,使钻井液性能稳定且易于调整,增强了泥饼的韧度和强度,完全达到了充分悬浮携带岩屑、润滑防卡、稳定井壁的要求。在钻进过程中仔细观察钻井液的动切力、动塑比、静切力初终值、固相含量、含油量、膨润土含量等性能参数的变化,“细化、超前、配套”是该井钻井液性能稳定、效果良好的主要维护处理经验。下套管、钻杆输送测井顺利,井下摩阻始终小于10 kN,全井安全无事故,仅用45d8 h钻完3200 m的进尺。     

非化学计量LaNi5型储氢合金的性能

采用富La混合稀土与Ni、Co、Mg等元素组合，获得了一种非化学计量LaNi5型储氢合金、用金相、XRD和SEM-EDX等方法分析了该合金的组织结构，研究了合金的气相储氢特性以及电化学性能，结果表明：在1.6MPa氢压和温度29℃下，该合金的储氢量达到1.58%（质量分数），该合金的放电容量为380mAh/g。经300次循环后容量保持率为55%，该合金的基体是CaCu5型结构的LaNi5相，但有第二相（LaMg)Ni3析出，这种第二相的形成是导致该合金大容量的关键。     

Optimal Operation of Reservoir Systems using Simulated Annealing

A stochastic search technique, simulated annealing (SA), is used to optimize the operation of multiple reservoirs. Seminal application of annealing technique in general to multi-period, multiple-reservoir systems, along with problem representation and selection of different parameter values used in the annealing algorithm for specific cases is discussed. The search technique is improved with the help of heuristic rules, problem-specific information and concepts from the field of evolutionary algorithms. The technique is tested for application to a benchmark problem of four-reservoir system previously solved using a linear programming formulation and its ability to replicate the global optimum solution is examined. The technique is also applied to a system of four hydropower generating reservoirs in Manitoba, Canada, to derive optimal operating rules. A limited version of this problem is solved using a mixed integer nonlinear programming and results are compared with those obtained using SA. A better objective function value is obtained using simulated annealing than the value from a mixed integer non-linear programming model developed for the same problem. Results obtained from these applications suggest that simulated annealing can be used for obtaining near-optimal solutions for multi-period reservoir operation problems that are computationally intractable.     

柔性制造系统的托盘优化

本文讨论Job-shop型柔性制造系统的托盘优化问题,给出了求最小托盘数的算法,把托 盘优化问题化成了求解线性整数规划问题.     

Modelling the rate of secondary succession after farmland abandonment in a Mediterranean mountain area

Secondary succession after farmland abandonment has become a common process in north Mediterranean countries, especially in mountain areas. In this paper, a methodology is tested which combines Markov chains and logistic multivariate regression to model secondary succession after farmland abandonment in environments where abiotic constraints play a major role, like mountain areas. In such landscapes, a decay in the succession rate with time is usually found, as the best locations are progressively occupied. This is frequently addressed using non-stationary Markov chains. Here, we test if the combination of logistic multivariate regression with Markov chains, however, allows for spatially distributed transitions probabilities based on abiotic factors and therefore, it is able to reproduce the preferential colonization of the most favourable locations. The model is tested in the Ijuez Valley in the Spanish Pyrenees, which underwent generalized land abandonment during the 1950s. Results confirm a substantial improvement in the prediction success of the Markov-logistic model when compared to the standard Markov chain approach. As a result, the decay in the succession rate can be successfully modelled. The specific results for our study area are discussed further in an ecological context. The methodology proposed is applicable to any landscape where vegetation dynamics are constrained by environmental factors. However, the inclusion of land use as an explanatory factor would be necessary in human-managed landscapes.     

合山电厂3个机组主厂房定向爆破拆除

介绍了广西合山电厂 1#～3# 机组主厂房定向爆破设计与施工.该工程不仅规模大、环境十分复杂、工期紧、难度高、风险性极强,最大特点是拆除发电设备与爆破同步进行施工.     

An adaptive non‐conforming finite‐element method for Reissner–Mindlin plates

Adaptive algorithms are important tools for efficient finite‐element mesh design. In this paper, an error controlled adaptive mesh‐refining algorithm is proposed for a non‐conforming low‐order finite‐element method for the Reissner–Mindlin plate model. The algorithm is controlled by a reliable and efficient residual‐based a posteriori error estimate, which is robust with respect to the plate's thickness. Numerical evidence for this and the efficiency of the new algorithm is provided in the sense that non‐optimal convergence rates are optimally improved in our numerical experiments. Copyright © 2003 John Wiley & Sons, Ltd.     

紧凑式轧机变形规程优化设计

本文从紧凑式轧机的轧制变形特点出发,分析了其变形规程设计的主要特点和方法,讨论了限制其道次变形量的基本因素,给出了优化设计的目标函数和约束条件。指出,类似这种具有复杂约束的轧制变形问题采用混合罚函数法处理更为有效,并成功地采用该方法进行了变形规程的试设定。     

2~#加压站煤气热值检测及控制

本文叙述了马钢引进美国ＦＬＵＩＤ　ＤＡＴＡ公司的热值仪与计算机控制系统，有效地解决了煤气混合加压生产中热值的检测与控制问题。