Simulation of industrial man-machine systems

In the design of large industrial processes, ergonomics designers can benefit from the use of computer simulation of man/machine systems when on-site studies are too risky or costly and laboratory studies alone have questionable generalization. This paper provides an illustration of this methodology for a hot strip mill in the steel industry and a demonstration of ergonomic design applications. A special simulation package which was developed for small military systems was adapted to this large industrial case and applied to an older manually-controlled mill of the 1930s. The simulation model was then modified to reflect automation and manning changes found in the mills built in the 1950s and the simulation results verified the actual performance differences between these mills. Experiments in further design and manning changes were made in order to demonstrate the usefulness of simulation as a design-aiding technique.     

泡沫玻璃窑炉温度控制系统的设计与应用

针对泡沫玻璃生产线窑炉温度控制的工艺要求,设计并应用了P L C温度控制系统、P I D控制算法。现场应用表明,该系统运行稳定可靠,设计先进,界面友好,控制精度高,具有较高的实用价值,从而保证了产品的质量,降低了能耗,提高了企业竞争力。     

Cooling rate effects on the microstructure and phase formation in Zr51Cu20.7Ni12Al16.3 bulk metallic glass

A detailed transmission electron microscope (TEM) study has been conducted to investigate the microstructures of the Zr₅₁Cu_20.7Ni₁₂Al_16.3 metallic glass formed at different cooling rates. It has been found that the most competitive crystalline phase to the amorphous structure is an oxygen-stabilized FCC NiZr₂-type phase, which in turn acts as the leading phase to trigger the formation of other crystalline phases in the slow-cooled alloy.     

Fabrication of Er3+/Pr3+ Co-doped soda-lime glass thin films using RF magnetron sputtering method and optical property characterization

Er^3+/Pr³⁺ co-doped soda-lime glass thin films have been fabricated using RF magnetron sputtering method and their structural and optical properties have been studied. Deposition rate, crystallinity, and composition of glass thin films were investigated by scanning electron microscopy, transmission electron microscopy, and electron probe micro area analysis. Refractive index, birefringence and binding characteristics have been investigated using a prism coupler and X-ray photoelectron spectroscopy. Er³⁺/Pr³⁺ co-doped soda lime glass thin films were prepared by changing substrate temperature (room temp. ∼550^∘C), RF power (90 W–130 W), and Ar/O₂ gas flow ratio at processing pressure of 4 mTorr. Glass thin films could be obtained at the optimized processing condition at 350^∘C, RF power of 130 W, and gas flow of Ar:O₂ = 40:0 with maximum deposition rate of 1.6 μm/h. Refractive index and birefringence increased from 1.5614 to 1.5838 and from 0.000154 to 0.000552, respectively, as the content of Pr³⁺ increased. Binding energy of Pr3d also increased as the content of Pr³⁺ increased.     

改性三聚氰胺氰尿酸盐阻燃玻纤增强PA6的研究

采用改性三聚氰胺氰尿酸盐阻燃玻纤增强尼龙6,考察了阻燃材料的阻燃性能、加工流变性能、力学性能及热变形温度,分析了该阻燃剂的作用机理。     

稀土离子掺杂对长余辉发光玻璃发光性能的影响

选择制备了系列Eu^2＋，Dy^3＋共掺杂的硼铝酸锶长余辉发光玻璃。利用发光光谱、余辉衰减曲线、热释光谱系统研究了稀土离子掺杂对长余辉玻璃发光性能的影响。研究结果表明，不同掺量组合的Eu^2＋及Dy^3＋对长余辉玻璃发光性能有不同影响，在Eu^2＋及Dy^3＋掺量比为l：l（摩尔比）的情形下，随Eu^2＋离子掺量的增多，发光性能下降；在Eu^2＋及Dy^3＋掺量比为1：2的情形下，随Eu^2＋离子掺量的增多，发光性能增强。在此实验基础上，围绕缺陷形态及其与稀土离子间的能量传递，提出了可能的长余辉机制。     

Influence of Composition of Sm2O3-Containing Rare Earth Glass on Its Absorption Spectrum

Lanthanidemetalsarethe 5 7thto 71thelementsintheperiodictable ,thetrivalentionsforlanthanideareofvalenceelectronshell 4f0～ 14 6s2 ,whicharefairlystablewhenthe 4felectronsub layerisemptyoral mostempty ,halffullorfull .Becauseofbigenergydifferencebetweenba…     

细胞微注射玻璃针的制造

介绍了细胞微注射用玻璃微针的制造。实验结果表明以国产玻璃毛细管为原料,通过对加热温度、拉伸速度、拉伸长度及顺序的合理配置可以制造出各种规格的微注射用玻璃微针。为拉针器的国产化及商品化提供了技术基础。     

一点对多点通讯在卫星测试无线转发系统中的应用

分析了卫星测试无线转发中一点对多点通讯系统中的关键性技术：包括硬件连接、通讯方式及有关技术，并给出了具体方案。     

脉冲氙灯用截紫外石英玻璃管性能的研究

研究了不同CeO2浓度掺铈石英玻璃的光谱性能和机械强度，制备了几种不同杂质(CeO2，Al2O3，TiO2)含量的掺铈石英玻璃管，并且这些掺铈石英玻璃管用相同的工艺研制成大功率脉冲氙灯。对掺铈石英玻璃管的光谱性能、机械性能和热学性能进行了测试，并测试了脉冲氙灯放电的极限负载能量。通过对比实验表明，掺入适量的CeO2等杂质的掺铈石英玻璃管可以吸收氙等离子体的320nm左右的近紫外辐射，改善脉冲氙灯的辐射光谱。但CeO2等杂质的掺入降低了掺铈石英玻璃管的机械强度，导致掺铈石英玻璃管脉冲氙灯的极限负载能量比纯石英玻璃管脉冲氙灯有差距，影响了掺铈石英玻璃管脉冲氙灯的使用寿命。因此，有必要研制一种既能吸收氙等离子体的320nm左右的紫外辐射，又具有高强度的脉冲氙灯管壁材料。