汽车覆盖件成形过程数值模拟研究

本文介绍汽车覆盖件成形过程有限元模拟两个软件ＩＴＡＳ—３Ｄ和ＤＹＮＡＭＩＣ的最新研究成果，基本原理和有关接触搜索、摩擦和拉伸筋模型等关键技术。并有两个应用实例     

回火过程应力场计算机模拟

回火过程应力场计算机模拟林家骝，杨振枢，于震宗，段贵明（清华大学）郭剑仁，史全兴，谢克仁（内蒙古第一机器厂）ＡＳｔｕｄｙｏｆＮｕｍｅｒｉｃａｌＳｉｍｕｌａｔｉｏｎｏｆＳｔｒｅｓｓＦｉｅｌｄｄｕｒｉｎｇＴｅｍｐｅｒｉｎｇ￥ＬｉｎＪｉａｌｉｕ；ＹａｎｇＺ...     

Analysis of the oscillatory behavior of double-walled carbon nanotube-based oscillators

Molecular dynamics simulations of oscillatory behaviors of double-walled carbon nanotube-based oscillators are performed. The second-generation empirical bond-order potential is used for the atomic interactions within a wall, and a registry-dependent and four different registry-independent van der Waals potentials are used for the atomic interactions between walls. It is found that the frequencies of the nanotube oscillators are sensitive to the choice of the van der Waals potentials. An almost non-decay oscillation is observed for the registry-dependent potential when there is no rocking motion. However, an apparent decay oscillation is observed when rocking motion occurs. A decay oscillation is observed for all registry-independent potentials even without rocking motion. Mechanisms leading to unstable oscillatory behavior are analyzed.     

充油S-SBR加工行为的研究

在中试装置上合成相对分子质量分布较宽的充油S-SBR，考察不同环烷油和芳烃油填充量的充油S-SBR的流变性能和混炼行为。结果表明，增大油的填充量能提高充油S-SBR的流动性能，充芳烃油S-SBR相对于充环烷油的S-SBR对温度更敏感，宽相对分子质量分布的充环烷油S-SBR的混炼性能优于S-SBR1204及E-SBRl778，竟相对分子质量分布的充芳烃油S-SBR的混炼性能优于S-SBR1204，Solprene380和E-SBR1712。     

富集均三甲苯塔的模拟与优化

在满足工艺要求的基础上，通过富集均三甲苯塔模拟与优化给出最佳操作条件，用于指导实际操作和设备改造．优化生产参数。     

钛酸钾品须填充UHMWPE复合材料的摩擦磨损性能研究

用钛酸钾晶须(PTW)对超高摩尔质量聚乙烯(UHMWPE)进行填充改性,考察了复合材料的摩擦磨损性能,研究了其结晶情况,观察了磨损表面形貌并分析了其机理.结果表明随着PTW用量的增加,复合材料的硬度、结晶度以及维卡软化点都有所增大.PTW提高了复合材料的耐磨性,但摩擦系数有所上升.PTW的加入使得UHMWPE的磨损机理从黏着磨损和塑性变形改变成疲劳磨损和轻微的塑性变形,提高了其抗磨粒磨损的性能.     

SIMULATION AND ESTIMATION OF LONG MEMORY CONTINUOUS TIME MODELS

Abstract. Some general properties of long memory continuous time processes are recalled or proved. Methods of simulation are studied. A comparison with the usual discrete time autoregressive fractionally integrated moving-average filter is made and illustrations are provided. Then, two methods of estimation of the parameters of such a model from a discrete sample are studied, both theoretically and empirically, with Monte Carlo experiments.     

射流流化床内流体力学行为的模拟研究

以流化床应用为代表的气固流动系统是许多化工过程中的重要组成部分 ,CFD( computational fluid dynamics)方法能够为其优化设计和放大提供所需要的信息 .本文采用双欧拉模型 ,与 Gidaspow等的实验结果进行了对比 ,模拟了二维射流流化床内气泡的形成规律 ,得到了带锥型分布器的流化床内瞬时空隙率和气固相速度分布等流体力学参数 .对锥型分布器流化床的实验结果表明 ,模拟得到的气泡的形状与实验现象相接近 .     

Modeling of fast pulse responses in the Multitrack: an advanced TAP reactor

A detailed transport model for the Multitrack setup, a TAP-like system, has been developed, which allows further analysis of adsorption, diffusion and catalysis phenomena. This includes the transport in the void part between the pulse valve and the reactor inlet. The effects of viscous flow and thermal transpiration, aspects that have not been studied in detail before for this type of setup, have been analyzed. A new expression for the modeling of the output signal is proposed depending on the positioning of the MS detector used in the study. The transport parameters of the model have been estimated by the analysis of the experimental pulse responses of the empty reactor system and the reactor charged with an inert packed bed. The proposed model reproduces the experimental pulse responses very well, and therefore can be extended to study systems with reacting or adsorbing beds by including the corresponding rate equations for the processes occurring in the bed of particles.