金属－橡胶硫化粘接过程中分子取向行为的间接证据

对金属－橡胶热硫化粘接复合体的剥离行为进行了研究，同一粘接试样的双向１８０°剥离试验显示出了巨大的差异。本文分析了弹性材料在硫化过程中的分子行为，并提出了相应的新假设，认为这是由于金属－橡胶在硫化粘接过程中分子取向交联行为所致。这种双向１８０°剥离破坏现象可被看作是金属－橡胶硫化粘接过程中分子取向行为的间接证据。     

玻璃包装改进及经济效益分析

论述了平板玻璃包装技术改进对提高包装质量和企业经济效益的影响,介绍了平板玻璃包装箱(架)的性能,简述了计算机辅助设计及计算机辅助管理在玻璃包装结构设计及包装质量管理中的效用。     

对遂昌金矿采场结构参数的探讨

对于遂昌金矿合理的采场结构参数，目前没有理想的确定方法。本文联系上盘围岩的构造裂隙，矿房的支护形式等提出采场稳定跨度判断指标。经４０个采场的检验，值信度达９７．５％。     

含能材料分子结构与感度的相关性

综述了国外近年来含能材料分子结构参数与感度相关关系的最新研究成果。研究表明：某些芳香族硝基化合物的撞击感度与Ｃ－ＮＯ２键强度有关；硝胺及脂肪族硝基化合物的冲击波感度与分子中Ｎ－ＮＯ２键的数目，长度和分子量相关。     

Phase separation studies in RIM polyurethanes catalyst and hard segment crystallinity effects

Polyurethanes were prepared from pure 4,4′-diphenylmethane diisocyanate (MDI), 1,4-butane diol (BDO) or 1,2-ethane diol (EDO) and α,ω-hydroxyl poly(propylene oxide) (PPO) by reaction injection moulding (RIM). Hard segment (MDI + BDO or EDO) level was 45–50 wt%. The PPO had about 20% ethylene oxide copolymerized in at the chain ends to provide 80% primary OH end groups. M_n was varied from 2000 to 4000. Dibutyl tin dilaurate catalyst and mould temperature were varied. Dynamic mechanical, wide-angle X-ray, differential scanning calorimeter, molecular weight and tensile elongation measurements were made on the RIM polyurethanes. At low reaction rates (low catalyst or temperature) highly crystalline, well phase separated but low molecular weight polymers were produced. At high catalyst or temperature levels more poorly phase separated but high molecular weight, tough polymers resulted. Higher M_n PPO gave better phase separation and EDO gave higher melting temperatures. Preventing hard segment crystallinity by substituting asymmetric MDI or glycols resulted in phase compatibility.     

透湿膜的透湿机理与膜的研究概况

基于透湿膜的空气除湿是一种比较新颖的空气除湿方法。本文介绍了各种膜在空气除湿领域的应用情况，结合对膜制备工艺的简要介绍，侧重对原除湿原理，亲水性的高分子纤维素膜，凝胶膜和分子筛无机膜在空气除湿领域的研究和进展进行了分析。     

手套箱气氛中氚化水处理的工艺研究

分子筛吸附柱和热金属镁床是手套箱气氛中氚化水 (HTO)搜集和分解处理的一种有效手段。测试了分子筛柱对气氛中水的吸附性能和热金属镁床对HTO的分解性能。结果表明 :分子筛柱对气氛中水的吸附效率 >99 99% ,在空气中水含量为 3 4× 1 0 - 3～ 4 2× 1 0 - 3条件下 ,未发现吸附柱水的贯穿现象 ;热金属镁床对HTO的分解率 >99 9% ,当金属镁的消耗量大于 80 %时 ,未见分解率明显降低。     

高层建筑损伤识别中的补偿算法

本文在已有研究工作的基础上，提出了处理激励测量信息不完备情况下的补偿算法。此方法主要针对高层建筑动力检测中强迫激励的情况，是一种基于时域的识别方法，该方法实际上是利用客观工程实际中结构系统激励所具有的物理持征作为识别计算的辅助条件，来解决测量信息的不完备性问题。算例分析表明了该方法的可行性。     

Defects in molecular beam epitaxial GaAs grown at low temperatures

We have utilized a variable energy positron beam and infrared transmission spectroscopy to study defects in GaAs epilayers grown at low temperatures (LT-GaAs) by molecular beam epitaxy. We have measured the Doppler broadening of the positron-electron annihilation gamma ray spectra as a function of positron implantation energy. From these measurements, we have obtained results for the depth profiles of Ga monovacancies in unannealed LT-GaAs and Ga monovacancies and arsenic cluster related defects in annealed LT-GaAs. We have also studied the effects of the Si impurities in annealed LT-GaAs. The infrared transmission measurements on unannealed LT-GaAs furnish a broad defect band, related to As antisites, centered at 0.370 eV below the conduction band.