A 6 million-ton/year Mining Project Goes Into Operation at Hudehe Copper Mine

【正】Recently, a 6 million -ton/year mining project went into operation at Hudehe Copper Mine,the largest copper mine in Xinjiang. Arken Imirbaki, director of the...     

On the experimental and numerical investigation of clay/epoxy nanocomposites

Due to increasing use of clay/epoxy nanocomposites in industry, investigation of mechanical properties of clay nanocomposites has become of great interest. While the stiffening mechanism of clay nanocomposites is well documented, there is still not a clear understanding about how addition of clays affect the fracture behavior of clay/epoxy nanocomposites. The main aim of this paper is to measure and explain the effect of clays on ductility reduction of these nanocomposites. First, epoxy and clay/epoxy nanocomposites with different clay weight ratio were built. Then, the damage parameters of epoxy and clay/epoxy nanocomposites were measured by variation of the elasticity modulus. Based on loading–unloading experiments, the Lemaitre damage parameters for epoxy and clay/epoxy nanocomposites were extracted. Crack initiation and propagation in dog-bone sample were simulated for epoxy and clay/epoxy nanocomposites using the eXtended Finite Element Method (XFEM). The comparison between experimental and numerical results shows that the proposed method can predict the crack initiation location and propagation path in clay/epoxy nanocomposites.     

TK250-14/430同步电动机特殊故障判断检修

通过分析TK250-14/1430I同步电动机转子短路环连接处易松动问题的产生原因,找出了解决该问题的具体办法,具有一定的参考价值。     

SCMA场景下的极化码编解码方案改进研究

极化码是目前唯一一种被证明可达到信道容量的编码方式,稀疏码分多址接入(Sparse Code Division Multiple Access,SCMA)可以提高频谱资源的利用率和接入系统的用户接入数量。为了提升SCMA与极化码的联合系统的误码率性能和译码时延,使联合系统的应用越来越广泛,提出了2种降低译码复杂度的方式:简化的左信息更新方式和剪枝译码算法。简化的左信息更新方式对于N=256,N=1 024的极化码分别能降低37. 6%和44. 6%的存储资源占用数;剪枝译码算法在码率为0. 5时能降低50%左右的计算复杂度。基于简化的SCAN算法改进了联合检测译码算法,在接收机采用外循环迭代的结构,引入了阻尼机制,选取最优的阻尼方式和最优阻尼值。仿真分析了所提联合检测译码算法与原有联合检测译码算法的误码率性能差异,外迭代接收机性能与内外双循环迭代的接收机性能相同,采用阻尼机制联合接收机的性能比无阻尼接收机的性能高0. 8 dB左右,SJIDD的误帧率性能比保留宽度为32的SCLJDD的性能低0. 7 dB左右,但能使接收机处理时延降至原来的1/4～1/8。     

压电式微定位工作台及其控制系统

为了提高机床的定位精度，研究、设计了一种以柔性铰链为导向元件、压电陶瓷为驱动器的微定位工作台。微定位工作台在滚珠丝杠副驱动的基础上，对工作台进行了二次精定位。给出了工作台的设计简图，并对其动力学模型进行了分析，结合检测装置和微机控制系统，设计了基于前馈控制同数字PID反馈控制相结合的复合控制的微定位控制系统。实测表明，微定位工作台定位分辨率可达到0．01μm，可满足精密、超精密加工的需要。     

几种基于最大互信息准则的联合均衡方法性能比较

在块传输系统中，采用预编码—后均衡相结合的联合均衡技术能够有效克服信道的色散效应。本文针对无线信道中三种用滤波器组实现的块传输系统的联合均衡方法，就系统的最大互信息量和误码率性能作了分析比较。理论分析和仿真结果表明，作者提出的MMI—DFEl方法具有最佳性能。     

Multi-User MIMO Mobile CDMA Uplink System Employing Turbo Coding and Joint Detection Through a Multipath Rayleigh Fading Channel

In this paper, a generalized multiple-input multiple-output (MIMO) antenna system that can be fitted to the uplink of a wireless communication system is considered for the general case of multi-user. At the transmitter, the information bits are Turbo coded, then interleaved and passed through a serial-to-parallel converter. The channel is assumed bad urban suffering from multipath Rayleigh fading resulting in inter-symbol and multiple access interferences (ISI and MAI). At the front-end of the receiver, a number of receiving antennas are used followed by a joint multi-user estimator based on the Minimum Mean Square Error Block Linear Equalizer (MMSE-BLE).Computer simulations demonstrate a significant performance improvement in both single user and multi-user cases.This paper depends in parts on that presented at the 11th European Wireless Conference, Cyprus, Nicosia, pp. 187–192, April 2005. Yasmine A. Fahmy was born in Guiza, Egypt, on June 4, 1976. She received the B.Sc., M.Sc. and Ph.D. degrees in Communication and Electronics engineering from Cairo University, Egypt on 1999, 2001 and 2005 respectively. She is presently an assistant professor at Cairo University, Egypt. Her current field of interest is wireless communication and channel estimation. Hebat-Allah M. Mourad received her B.Sc., M. Sc. and Ph.D. degrees in electrical communication engineering from Cairo University, Egypt, in 1983, 1987 and 1994 respectively. Since 1983, she has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently associate professor there. Her research interests include optical fiber communications, mobile and satellite communications. Emad K. Al-Hussaini received his B.Sc degree in Electrical Communication Engineering from Ain-Shams University, Cairo, Egypt, in 1964 and his M.Sc and Ph.D. degrees from Cairo University, Giza, Egypt, in 1974 and 1977, respectively. From 1964 to 1970, he was with the General Egyptian Aeroorganization. Since 1970, he has been with the Department of Electronics and Communications, Faculty of Engineering, Cairo University, and is currently professor there. He was a research fellow at Imperial College, London, UK, and at the Moore School of Electrical Engineering, University of Pennsylvania, Philadelphia, PA, USA, in the academic years 1976/1977 and 1981/1982, respectively. In 1990, he received the Egyptian national encouragement award for outstanding engineering research. He has written several papers for technical international journals and conferences. His research interests include signal processing, fading channel communication, modulation, and cellular mobile radio systems. Dr Al-Hussaini is a senior member of IEEE. He is listed in Marquis Whos Who in the World and in the IBC (International Biographical Center, Cambridge) for outstanding people of the 20th century.     

对美军联合战术信息分发系统的通信干扰研究

根据联合战术信息分发系统（JTIDS）的工作方式和信号特点,探讨了干扰JTIDS的技术样式,分析了对JTIDS进行组合干扰（由宽带噪声干扰与非相干瞄准式伪码扩频干扰构成）的效果．提出了有效干扰JTIDS的具体方法。     

可堆积饼式旋转关节的设计

提出了可堆积饼式旋转关节的结构原型,介绍了设计该旋转关节时需要考虑的因素以及关键部分的设计方法,并且设计加工了一个L波段饼式旋转关节,给出了实验结果,验证了该方法的可行性。     

碳纳米管的大面积合成及磁性(英文)

通过溶胶凝胶法和氢气还原法制备出Co纳米颗粒并以此作为催化剂材料,通过催化裂解苯的方法,实现了较低温度(460℃)下在Co纳米颗粒表面上合成碳纳米管。采用X射线衍射、激光喇曼光谱、场发射扫描电镜、透射电子显微镜和振动样品磁强计对所合成的碳纳米材料进行了表征。通过优化实验参数,可制备出最大产率和纯度分别为约50和98.02%(质量分数)的碳纳米管。由于铁磁性Co纳米颗粒的进入,使得整个复合物表现出比较好的磁性能。和以往以苯作为碳源合成碳纳米材料相比,此合成方案简单、成本低,且对环境无任何危害,非常适用于磁性碳纳米复合物的批量合成。