已二醇二丙烯酸酯对真丝的接枝改性研究

研究了用二醇二丙烯酸酯为接枝单体、过硫酸铵（APS）为引发剂对真丝的接枝共聚反应，分析了接枝率的影响素，并测试了改性真丝的主要应用性能。结果表明：乳液和乙醇/水为溶剂的2种体系都能在真丝上获得较高接枝率。对于乙醇/水体系v(乙醇）：v(H2O）=1:1，接枝单体20～30g/L,2%甲酸4ml，引发剂APS 0.5g/L,65～70℃接枝60min的接枝率高。改性后真丝的断裂强度、延伸度、吸湿性能都可获得改善，对酸、碱的溶解性提高，但染色性能提高不明显，对泛黄性改善一般。     

Thermally induced microstructural changes in cotton fibers: A free‐volume study

I measured positron lifetime in natural polymer–cotton fibers as a function of isochronal annealing temperature in the range 27–290°C. The variations in the positron results indicated structural changes occurring in the cotton fibers and determined the glass‐transition temperature as 80°C. Activation energies were measured separately for the crystalline and amorphous regions, indicating the versatility of the technique. These values were close to the O? H bond dissociation energy, suggesting O? H bond dissociation, the most probable process occurring under thermal treatment. As an extension of the positron results, the molecular weight of the cotton fibers was determined to be 1,200,000 based on free volume, which was within the range suggested for cotton. There seemed to be an indication that crosslinking changed the spiral structure of cotton fibers to the network type. However, this needs to be validated by other measurements. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3336–3345, 2002     

Films and fibers of oriented single wall nanotubes

As-produced nanotubes form a light, fragile and isotropic soot. Different efforts are made to process nanotubes into macroscopic forms of more practical use and more controlled properties. We briefly review in this paper two methods recently proposed to make films of magnetically aligned nanotubes and fibers by using an electrophoretic method. Preferential orientation of the nanotubes in the plane of the films or along the fiber axis is an important feature of the obtained materials. Then we describe in details a different, spinning like, process for making fibers out of single wall carbon nanotubes. This process consists of dispersing the nanotubes in a surfactant solution, re-condensing the nanotubes in the flow of a polymer solution to form a nanotube mesh, and then collating this mesh to a nanotube fiber. The behaviors of the surfactant-stabilized dispersions, which are also presented, are critical for this process. The degree of nanotubes alignment in dried fibers has been characterized by X-ray scattering. It is found to be smaller than the alignment obtained in the previous materials. However, the processing is simpler and faster and potentially scalable for large-scale production.     

HYSIM软件模拟天然气加工工艺流程的研究(Ⅰ)——系统中无循环物流

本文结合大庆油田天然气矿场加工实际生产装置,讨论了应用HYSIM烃类工艺模拟软件对含有不确定组分的体系进行流程模拟计算的特点、塔设备严格模拟计算过程中输入规定的选择、以及多股流换热器和吸附脱水工艺的模拟计算方法。     

砂岩气藏水基欠平衡钻井逆流自吸效应实验研究

采用水基钻井液欠平衡钻开砂岩气层时，欠平衡压差往往并不能完全抵消岩石的自吸毛细管力，从而产生逆流自吸效应。这种自吸效应可能对砂岩气藏水基欠平衡钻井的储层保护效果产生影响，但目前与之有关的实验研究还很缺乏。为此，设计了一套实验装置，模拟水基欠平衡条件，研究了砂岩基块孔隙逆流自吸规律及其影响因素。结果表明，水基欠平衡钻井过程的逆流自吸效应引起岩石气相渗透率降低，削弱欠平衡钻井的储层保护效果；欠平衡压差越小，逆流自吸作用越强，过小的欠压值不能起到欠平衡钻井保护储层的作用；随着逆流自吸时间延长、围压增加和黏土矿物膨胀，逆流自吸导致气相渗透率下降的程度加剧；逆流自吸引起的气相渗透率下降速率可以表示成时间的幂函数。     

PAN共聚纤维的热氧化研究

本工作采用连续式实骏装置与方法,借助力学测试、X射线衍射、元素分析、红外光谱等技术,系统地研究了PAN共聚纤维在连续热氧化过程中化学、结构、性能间的联系,亦对PAN基碳纤维力学性能提高的途径进行了探讨。研究结累表明:在热氧化过程中,PAN共聚体系的热化学反应主要发生在250℃左右;其间纤维的序态结构变化剧烈,易使纤维产生结构缺陷,进而影响热氧化纤维力学性能的变化。     

0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷的相结构研究

利用XRD，XPS和TEM等测试手段对0.64BaTi4O9-0.36BaEu2Ti4O12/BaTi4O9纤维复合陶瓷新材料的相结构进行了研究。研究结果表明：随着BaTi4O6纤维的加入，烧结试样表面O元素的含量提高，材料中Ti^3 离子和Ti^2 离子的含量降低，材料介电性能有所提高。     

天然气的储存

随着能源结构的调整,天然气在一次能源中的比重逐步增大,天然气的储存成为人们日益关注的课题,作者就此作一综述。     

天然气制液态烃新工艺

丰富的天然气资源,特别是边远地区分散的中小天然气田和油气共生的油气田的天然气,由于产量达不到管线长输的规模效益,又远离消费市场,很难开发利用.为此,作者在天然气两段催化氧化制合成气和费-托合成研究的基础上,提出了一种流程较短、投资和操作费用较低的天然气合成液态烃新工艺,可将丰富的天然气资源,特别适合将边远地区分散的中小天然气田的天然气转化为无硫、无氮、无芳烃、无重金属污染和便于输运的优质石蜡基液态产品.该产品可经轻度加氢改质得到高品质的柴油掺合组分、润滑油基础油高等附加值产品.该工艺副产的燃料气可用于发电,或作为燃料气使用.