�Լӿ��Ĵ���Ȼ�����ܽ������ʶ

本文根据四川天然气产能建设多年的实践,分析了产能建设的特点和存在问题,着重强调了当前搞好产能建设应注意的几个问题,供决策和工作参考。     

�¸�������в������Ȼ�����꾮�ٶȵ�;��

本文针对天然气井提高钻井速度问题,总结分析了盆地中部井身结构,水力、机械参数,聚合物钻井液,正注反挤固井等工艺技术对该地区钻速的影响。指出提高天然气井钻井速度,必须搞好系统工程,形成配套技术。     

含多孔物质硝胺发射药的温感特性

研究了多孔物质对于硝胺发射药在不同初温下的燃面调节作用，由于多孔物质的孔结构及其与基体界面状况的改变，使发射药低温燃面增大，而高温燃面减小，这有利于降低燃速温度系数．     

TiB2和SiCW对Al2O3陶瓷材料高温摩擦磨损特性的影响

研究了Ａｌ２Ｏ３、Ａｌ２ｏ３／ＴｉＢ２和Ａｌ２Ｏ３／ＴｉＢ２／ＳｉＣＷ三处陶瓷材料在不同条件下的擦靡损特性。结果表明：三种陶瓷材料与硬质合金摩擦副的摩擦系数随温度温度的增加有不同的变化规律，摩擦表面的Ｘ射线衍射分析表明，摩擦系数的变化与陶瓷物膜的和结构有关，在高温下Ａｌ２Ｏ３／ＴｉＢ２陶瓷材料摩擦表面形成了具有优良的高温润性的ＴｉＯ２氧化膜，因而ＴｉＢ２的加入明显改善了Ａｌ２Ｏ３陶瓷材料 摩擦磨损     

流延法制作AlN陶瓷基片工艺

研究出一种用流延法制作ＡＩＮ陶瓷基片的工艺。制备出性能优良的ＡＩＮ基片。经１６５０℃，保温２ｈ无压烧结制得的基片，其热导率达１３０Ｗ／（ｍ·Ｋ）、密度为３．３４ｇ／ｃｍ￣３，表面光滑平整，瓷体结构均匀，性能达到用干压法制备的同类基片的性能。     

Finite Element Analysis of a Moving Boundary Value Problem

A finite element formulation and the solution of a set of nonlinear coupled heat and mass transfer equations for a two-phase system with a moving evaporation interface is presented. The interface condition takes into account the moisture transfer balance at the moving boundary. The finite element results were compared with existing results for a single phase system for model validation. In the two-phase system, the movement of evaporation front has an appreciable effect on the temperature and moisture distribution inside the porous medium during drying. The effect of the nondimensional heat of vapourization parameter γ on the evaporation front, temperature and moisture distribution in porous medium was studied. The higher the value of γ, the slower is the movement of the evaporation front. The temperature decreased and the moisture content increased as the nondimensional vapourization parameter γ increased. This model has potential applications in studying the heat and mass transfer characteristics in food and biomaterials.     

核孔膜生产线膜微孔制备工艺实验研究

本文介绍核孔膜生产线,重点描述了膜微孔制备工艺的实验研究。对于PC和PES膜,已得到32种工况下的扩孔公式,其形式为D=A+Bt,其中D——孔径,t——扩孔时间,A,B为特定工艺参数下的常数值.通过实验。得到了膜孔密度N与300~#核反应堆功率P、热柱辐照位置L的经验公式,即N=6.97×10~5×10~3×101~(1.18L).在本生产线上可生产最大幅面为3 140mm×240mm,孔径为0.04～10 μm的多系列多规格的核孔膜产品。     

The traditional Yemeni window and natural lighting

The traditional Yemeni window is considered to be one of the most important elements that characterize the yemeni architecture. The beauty of the traditional Yemeni window comes from its four main components which combined the functions of view, lighting, ventilation, protection, and privacy. These functions can be controlled by the occupants according to their social and environmental needs. The four main components are the lower part (Taqah), the fanlight (Qamariyah), the wooden external overhang (Konnah), and the small vent (Shaquos). Since fanlights provide natural lighting during day-time, the area of the lower part can be reduced and its exterior shutters can be closed without the need for artificial lighting. The internal natural lighting that is provided by the upper and lower parts of the window was investigated to see its quality. In this investigation, there were two main goals. The first is the contribution and quality of the internal light provided by the Qamariyah when shutters are closed. The second is the effect of the internal simple white cloth curtains, in the lower part, in the internal light quality. Visual measurements were taken in a typical room of a traditional house of the Old City of Sana'a, Yemen. From the findings, it was found that the fanlights (Qamariyat) provide low and soft homogeneous internal lighting which was as low as 22 lux average. However, the occupants have the ability to increase level of lighting to as high as 600 or 700 lux. This can be done simply by deciding which shutter to open and how many of them to be opened. In this paper, the methodology and findings will be presented and discussed.     

生物工程发酵饮料—醋酸饮料

本文着重介绍醛酸饮料的形成、特点和营养保健作用。     

稀土Si_3N_4陶瓷材料中铝的络合滴定法测定

提出了强碱介质沉淀钇及有关杂质元素而与铝进行分离的方法。试液酸化后采用ＮａＦ析出法络合滴定测定铝。