塑料旋转成型的特点与研究

介绍了塑料旋转成型的原理和主要特点，对旋转成型制品中易出现的气泡和弯曲，收缩现象，以及冲击强度低的原因进行了分析研究，相应地提出了减少或消除旋转成型制品中的气泡，减少或消除制品收缩和弯曲，以及提高制品冲击强度的主要途径。     

Ammonium phosphate slurry rheology and particle properties—The influence of Fe(III) and Al(III) impurities, solid concentration and degree of neutralization

Ammonium phosphate slurries are produced from impure phosphoric acid that contains Fe(III), Al(III) and Mg(II) ions. The insolubility of these metal ions and the onset of solid formation determined as a function of pH or mole ratio (MR) of ammonia to phosphoric acid were consistent with the trend for the pH of formation of the first hydrolysis product that decreases in the following order: Fe(III)<Al(III)<Mg(II). The hydrolysis products of Fe(III) formed at pH>2.0 or MR>0.5 initiate ammonium phosphate crystallization, reduce the size of particles formed and generate attractive interparticle forces. Similarly, the Al(III) hydrolysis products formed later at pH>2.6 MR>0.7), will also initiate further crystallization, adsorb on particles and produce attractive forces. The attractive forces and the high number concentration of particle—particle interactions are responsible for the increased viscosity and non-Newtonian flow behavior displayed at increasing Fe(III) and Al(III) concentration. Mg(II) ions are not hydrolyzed at MR<1.0 so its effect on rheology is negligible and its effect at MR<1.0 is also small as its concentration is much smaller than that of Fe(III) and Al(III) ions. The change in slurry viscosity with the degree of neutralization is also explained in terms of particle size distribution, solubility and solids concentration variations.     

Two-variable periodic perturbation of kinetic oscillations

Using one of the generic models (CO oxidation on Pt with surface-oxide formation) predicting kinetic oscillations in heterogeneous catalytic reactions, we show that the efficiency of two-variable periodic perturbations with respect to converting natural period-1 oscillations to period-l oscillations at the forcing frequency is remarkably sensitive to the kind of perturbations used. Counter-phase perturbations are much more effective compared to in-phase perturbations. The physics underlying these findings is suggestive of their applicability to many other models and/or real systems exhibiting kinetic oscillations.     

Liquid-Phase Catalytic Hydroxylation of Phenol Using Cu(II), Ni(II) and Zn(II) Complexes of Amidate Ligand Encapsulated in Zeolite-Y as Catalysts

Copper(II), nickel(II) and zinc(II) complexes of amidate ligand 1,2-bis(2-hydroxybenzamido)ethane(H₂hybe) encapsulated in the super cages of zeolite-Y have been prepared and characterized by spectroscopic studies and thermal as well as X-ray diffraction (XRD) patterns. These complexes catalyze the liquid-phase hydroxylation of phenol with H₂O₂ to catechol as a major product and hydroquinone as a minor product. Considering the concentration of substrate and oxidant, amount of catalyst, temperature of the reaction and volume of solvent, a best-suited reaction condition has been optimized to get maximum hydroxylation. Under the optimized reaction conditions, [Cu(hybe)]-Y has shown the highest conversion of 40% after 6h, which is followed by [Ni(hybe)]-Y with 37% conversion and [Zn(hybe)]-Y has shown the poorest performance with 33% conversion. All these catalysts are more selective towards catechol formation (90%), irrespective of their catalytic performance.     

Removal characteristics of disinfection by-products formation potential by bioaugmentation activated carbon process

The high-active bacteria were screened from 8 dominant bacteria obtained from the natural water body,and then the bioaugmentation activated carbon was formed by hydraulic immobilization of the high-active bacteria. Plant-scale studies on removal characteristics of disinfection by-products formation potentials (DBPFP) by bioaugmentation activated carbon process were conducted for micro-polluted raw water treatment. The results show that the bioaugmentation activated carbon process has adopted better purification efficiency to THMFP and HAAFP than traditional biological activated carbon process,and that average removal efficiencies of THMFP and HAAFP can reach 35% and 39.7% during the test period,increasing by more than 10% compared with traditional biological activated carbon process. The removal efficiencies of THMFP and HAAFP are stable because of the biodegradation of the high-active bacteria and the adsorption of active carbon. The biodegradability of CHCl3 formation potential is better as compared with that of CHCl2Br and CHClBr2 formation potentials among THMFP,and high removal efficiency of CHCl3formation potential is obtained by bioaugmentation degradation of the high-active bacteria. The biodegradability of HAAFP is better in comparison with that of THMFP,and the chemical properties of HAAFP are propitious to adsorption of activated carbon. Thus,HAAFP is on predominance during the competitive removal process with THMFP.     

基于PSO的多机器人编队控制

提出了一种新的编队算法。该算法针对不同的编队形状,根据机器人的位置信息,构造不同的函数,利用群体智能优化算法中的微粒群算法进行函数优化,优化过程中的最优解作为机器人的运动方向。最后利用该算法实现了线形、三角形、六边形和圆形编队,仿真结果表明了该算法的有效性。     

Characterization of NOM and THM formation potential in eutrophic reservoir water

Resin adsorption technique with XAD-8 and XAD-4 was used to characterize the raw water from Erlong reservoir in Jilin province of China. The NOM chemical composition sequences of four organic fractions in the raw water,from high to low,are fulvic acid (FA) fraction,hydrophilic non-acid (HPINA) fraction,hydrophilic acid (HPIA) fraction,and humic acid (HA) fraction. Experimental results show that FA is the main precursor of THMFP among the four organic fractions. However,HA or hydrophobic acid exhibits the highest chlorination activity in forming THMs. It is also found that the value of FI/DOC or SUVA and the specific THMFP have better positive correlation. It is implied that certain source water has unique nature of NOM and DBPs.     

Spacecraft formation control strategy on Sun-Earth Lissajous orbit

To carry out the deep space exploration tasks near Sun-Earth Libration point L2, the CRTBP dynamic model was built up and the numerical conditional quasi-periodic orbit (Lissajous orbit) was computed near L2. Then, a formation controller was designed with linear matrix inequality to overcome the difficulty of parameter tuning. To meet the demands of formation accuracy and present thruster’s capability, a threshold scheme was adopted for formation control. Finally, some numerical simulations and analysis were completed to demonstrate the feasibility of the proposed control strategy.     

高含硫气藏中元素硫沉积形态和微观分布研究

元素硫沉积是高含硫气藏开采过程中存在而又必须解决的难题之一.随着高含硫气藏储层压力不断下降,元素硫溶解度也不断下降,一旦元素硫溶解度低于元素硫含量,元素硫就会从地层中沉积下来.沉积的元素硫会堵塞地层孔隙,降低渗透率,严重影响气井产能.为了研究元素硫在地层中的沉积形态和沉积特征,利用自主设计的实验流程和实验方法,使TD5-1井高含硫气体通过岩芯,并降低压力让元素硫在岩芯中沉积下来,然后对沉积了元素硫的岩芯进行电镜扫描和能谱分析,首次得到了元素硫在岩芯中的沉积形态,即元素硫主要以膜状形式分布在岩芯孔隙壁面上.该研究结果为深入认识、掌握元素硫沉积规律以及指导高含硫气藏合理开发奠定了基础.     

添加剂对PVDF／PU复合膜成膜速度、结构与性能的影响

研究成孔添加剂聚乙二醇（PEG）和LiCl对聚偏氟乙烯（PVDF）／聚氨酯（PU）铸膜液体系的成膜动力学以及膜性能的影响．结果表明：加入PEG、LiCl均能加快成膜速度,膜的水通量有很大程度的提高,而截留率下降．不同相对分子质量PEG对成膜的影响略有不同．相对分子质量越大,黏度因素起到的作用越大,使得成膜速度随相对分子质量增加而稍有降低;相对分子质量越大,截留率下降得越明显;相对分子质量为4000时,PVDF／PU复合膜的综合性能最好．