Effects of phosphorus addition on the magnetic properties of sintered Fe-50 wt.% Ni alloys

Phosphorus was added to Fe-50 wt.% Ni in the form of a coated composite powder via an electroless plating process. Addition of phosphorus to Fe-50 wt.% Ni facilitated increases in density and grain size, both of which were beneficial to magnetic performance. Because of the homogeneous distribution of phosphorus in the powder, the optimal phosphorus addition was much lower than for those using Fe₃P as the phosphorus precursor. The optimal phosphorus addition was close to its maximum solubility in Fe-50 wt.% Ni (about 0.5 wt.%), above which precipitation of excessive phosphorus in the form of iron nickel phosphide, (Fe,Ni)₃P, effectively degraded the magnetic properties of Fe-50 wt.% Ni. Without the addition of phosphorus, good magnetic properties could be achieved only when the sintering temperature was high enough (>1200 °C) to result in a high sintered density and large grains in the sintered structure.     

An Optimization Method For Estimating Phase Compositions And Amounts In Two—Phase Nickel Base Superalloys

根据已知镍基合金成分和γ′相成分，运用分层宽容多目标优化法，分别计算了γ相成分及γ′相含量．优化测算过程的实现是通过建立使杠杆定律等式两端数值差最小和两相共格错配度最小的目标函数，并通过设置γ′相含量和基体相成分取值范围的约束条件而实现的．验证了该方法的可行性和准确性．     

Nickel Electroplating

NICKEL ELECTROPLATING has been practicallyused for decades.There is an unknown part in theplating,although this is easy to plate.Applications ofthe plating are described from the practical viewpoint.Purpose of Nickel Electroplating(1)Decorative,and corrosion resistanceNickel electroplating is deposited on iron,cupper,zinc and aluminum substrate etc.,and chromiumplating is usually deposited on nickel plating.Hexavalent chromium plating has an important effecton the corrosion resisitan…     

金属镍电沉积中枝晶分形生长的研究

将分形几何与电化学原理相结合,通过改进的有限扩散凝聚模型(diffusion-limited aggregation,DLA),采用基于Microsoft Visual C 6.0的Open GL编程,对点电极为阴极进行二维电沉积时沉积产物的形貌进行了模拟.以环形金属镍为阳极,石墨为阴极,用自行设计的试验设备制备了二维的金属镍枝晶以验证模拟结果.结果表明,在保持电压恒定的条件下,镍沉积层的形貌特征为具有分形结构的枝晶,这与采用DLA模型模拟所得的二维枝晶形貌具有相似性,表明该模型对枝晶电沉积的实验研究具有很好的指导意义.     

Initial stages of tin electrodeposition from sulfate baths in the presence of gluconate

Tin electrodeposition in its initial stages in acid sulfate/gluconate baths was studied with varying tin and gluconate concentrations using potential-controlled electrochemical techniques. The deposit morphology was observed by scanning electron microscopy (SEM). A comparison with tin electrodeposition from acid sulfate baths in the absence of gluconate was also carried out. Use of a highly acidic bath leads to nonuniform deposits, even in the presence of gluconate; at pH 4 deposits are uniform, brilliant and suitable for finishing applications. Tin crystallites have a well defined morphology which depends on bath agitation conditions. In the absence of agitation, the crystallites have the same tetragonal shape as in a sulfate bath without gluconate.     

硫酸钾生产出现问题的机理分析及改进建议

曼海姆法硫酸钾生产装置出现 3个问题 :原料 KCl中有机碳的分析结果非常高 ;测定副产盐酸总酸度 ,加 1～ 2滴甲基橙不显红色 ;分析副产盐酸中 SO4 2含量超标 (≥ 0 .1% )。分析产生以上问题的原因并提出解决措施     

Partial Oxidation of Methane to Syngas over Calcined Ni–Mg/Al Layered Double Hydroxides

The catalytic partial oxidation of CH₄ to syngas was carried out over an Ni–Mg/Al mixed-oxide catalyst prepared from layered double hydroxide-type precursors. The catalysts were characterized by XRD, TPR, UV-DRS, XRF, BET and CHNS analysis. The effects of the catalyst composition and the calcination temperature on the catalytic performance and the extent of catalyst deactivation were investigated. Ni–Mg/Al oxide catalysts converted CH₄ into syngas efficiently with high selectivity. The catalyst performance was strongly related to the Ni particle size and the calcination temperature. The catalysts that were calcined at higher temperature exhibited a better catalytic performance. In conclusion, the NiAl₂O₄ spinel phase had a positive effect on the stability of the catalyst.     

关于生产精制元明粉的探讨

介绍了以山西运城南风自产芒硝为原料生产精制元明粉的几种工艺,以及国内外精制元明粉的市场及生产状况.精制工艺包括化学除杂法、原料优选法、重结晶法.结果表明,精制元明粉的生产过程实质是一个除杂、提纯过程：对于钙离子含量高的原料,可采用化学除杂法;对于氯离子含量高的原料,可采用氯离子富集法、冷冻法或洗涤法;镁离子较难去除,可采用水硝洗涤、冷冻法.     

Effect of MoS2 morphology on the HDS activity of hydrotreating catalysts

We have applied near-edge X-ray absorption fine structure (NEXAFS) to characterize the surface and bulk properties of Li_xNi_1–xO catalysts. In our experimental set-up, NEXAFS spectra of powder materials could be obtained by measuring the intensity of either electron-yield or fluorescence-yield. While the electron-yield method is sensitive only to the top few atomic layers, the fluorescence-yield method can detect species up to a few thousands angstroms deep into the bulk structure. The ability to distinguish surface and bulk compositions is demonstrated in studies of a number of Li_0.5Ni_0.5O samples, of which the surface compositions vary as a function of preparation procedures. In addition, NEXAFS investigations following the reaction of Li_xNi_1–xO with CH₄ have also been carried out and the results indicate that the initial surface reaction intermediates are Li₂CO₃.     

四异丁氧基镍酞菁的合成及其溶剂效应

4 异丁氧基邻苯二腈与氯化镍在强有机碱 1 ,8 二氮杂双环 (5 ,4,0 )十一碳烯 7催化下反应 ,合成了四异丁氧基镍酞菁 ,产物经FT -IR、元素分析、UV -Vis吸收光谱和1 H NMR表征了结构 ;并研究了其溶剂效应 ,结果表明 :最大吸收峰波数ν与函数 f(n ,ε)存在一定的线性关系 ,线性相关系数为 0 940 2 ,而Bayliss函数项 (n2 - 1 ) /(2n2 +1 )决定了最大吸收波长 (λmax)的位移变化 ;化合物的λmax在不同溶剂中随聚集程度增加 ,发生一定程度的蓝移