从煤矸石制取氯化铝联产橡胶填料的研究

在实验室小试、中试装置上进行了从煤矸石制取氯化铝联产橡胶填料的研究，考察了煤矸石性质、工艺条件等对产品质量的影响，结果发现最佳工艺参数为焙烧温度６００～ｑ００℃．焙烧时间为１５～９０ｍｉｎ．焙烧温度对产品质量影响更为显著，制得结晶氯化铝产品质量达到合格品标准，填料用作橡胶制品填充剂具有较好补强与抗曲性能，其胶片的物理机械性能达到普通橡胶板标准。     

粘土橡胶纳米复合材料研究进展

简要概述了粘土的有机改性机理、橡胶/粘土纳米复合材料的制备方法、结构与表征和橡胶/粘土纳米复合材料的研究进展.     

Improvement of polymer blend properties by changing sequence of mixing

The basic objective of this article is to improve the polymer blend properties by changing mixing sequence. Blending of two elastomers does not lead to a molecularly homogeneous blend (true solution), but to a heterogeneous system in which both polymer phases are present. In this article, the detailed study of heterogeneous distribution of carbon black as well as blend inhomogenity and the physicomechanical including dynamic mechanical properties of the blend has been carried out. The choice of the blend was natural rubber/polybutadiene rubber as 85:15. Heterogeneous carbon black distribution study was also performed in differential scanning calorimeter. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2735–2742, 2007     

填料并用对双组分室温硫化导热硅橡胶性能的影响

以α,ω-二羟基聚二甲基硅氧烷为基胶,Si3N4、AlN、Al2O3为导热填料,制备了填充型双组分室温硫化（RTV-2）导热硅橡胶.研究了填料Si3N4/Al2O3或AlN/Al2O3并用对RTV-2硅橡胶导热性能、工艺性能及力学性能的影响.结果表明,当填料的总体积分数为0.45时,对于Si3N4/Al2O3填充体系,随着体系中Al2O3体积分数的增加,RTV-2导热硅橡胶的热导率先升后降、拉伸强度先增后减,而扯断伸长率则呈逐渐升高的趋势,基料的粘度先减后增;当Al2O3的体积分数为0.14时,RTV-2导热硅橡胶的热导率最高、拉伸强度最大,基料的粘度最小,综合性能最佳.对于AlN/Al2O3填充体系,随着体系中Al2O3的体积分数的增加,RTV-2导热硅橡胶的热导率先升后降、拉伸强度及扯断伸长率先减后增,基料的粘度呈上升趋势;当Al2O3的体积分数为0.07时,RTV-2导热硅橡胶具有较好的导热性能和工艺性能,但力学性能偏低.     

Melt‐compounded natural rubber nanocomposites with pristine and organophilic layered silicates of natural and synthetic origin

Composites based on natural rubber (NR) and containing organophilic and pristine layered silicates of natural and synthetic origin were produced by melt compounding and sulfur curing. The curing, thermomechanical, and mechanical properties of the mixes, which contained 10 phr (parts per hundred parts of rubber) silicates, were determined. The dispersion of the silicates was studied by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Organophilic clays accelerated the sulfur curing of NR, which was believed to occur because of a complexation reaction in which the amine groups of the clay intercalants participated. The property improvements caused by the fillers were ranked as follows: organophilic clays > pristine synthetic layered silicate (sodium fluorohectorite) > pristine natural clay (purified sodium bentonite) > precipitated nonlayered silica (used as a reference). This was attributed to partial intercalation of the organophilic clay by NR on the basis of XRD and TEM results and to the high aspect ratio of the fluorohectorite. Apart from intercalation, severe confinement (i.e., the collapse of the interlayer distance) of the organoclays was observed. This peculiar feature was traced to the formation of a zinc coordination complex, which extracted the amine intercalant of the organoclays, thus causing the collapse of the layers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 813–819, 2004     

Rice husk ash filled natural rubber. I. Overall rate constant determination for the vulcanization process from rheometric data

Black rice husk ash (BRHA) and white rice husk ash (WRHA) were incorporated into natural rubber (NR) using a laboratory‐size two‐roll mill. A conventional vulcanization system (CV) was chosen and cure studies were carried out on a TI‐100 Curometer. The torque curves were obtained at 150, 160, 170, and 180°C. The overall rate and the apparent activation energy for the vulcanization process were calculated for each compound assuming that vulcanization follows first‐order kinetics. For comparison purposes, two commercial fillers, precipitated silica (Zeosil‐175) and carbon black (N762), were also used. It was observed that addition of WRHA to NR compounds increased the cross‐linking rate and lowered the apparent activation energy more markedly than the other fillers. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1194–1203, 2003     

充油S-SBR加工行为的研究

在中试装置上合成相对分子质量分布较宽的充油S-SBR，考察不同环烷油和芳烃油填充量的充油S-SBR的流变性能和混炼行为。结果表明，增大油的填充量能提高充油S-SBR的流动性能，充芳烃油S-SBR相对于充环烷油的S-SBR对温度更敏感，宽相对分子质量分布的充环烷油S-SBR的混炼性能优于S-SBR1204及E-SBRl778，竟相对分子质量分布的充芳烃油S-SBR的混炼性能优于S-SBR1204，Solprene380和E-SBR1712。     

三元乙丙橡胶/蒙脱土纳米复合材料的制备方法与应用前景

橡胶／蒙脱土纳米复合材料的优异性能使其成为橡胶工业中富有潜力的一类新型材料。笔者综述了三元乙丙橡胶(EPDM)／蒙脱土纳米复合材料的制备方法、性能和工业应用领域等，讨论了蒙脱土片层的表面修饰、插层剂的选择以及复合材料的制备方法对材料性能的影响，并提出了三元乙丙橡胶／蒙脱土纳米复合材料这一新型橡胶材料在轮胎工业上的应用前景。     

热膨胀硅橡胶在复合材料成型工艺中的应用

简要介绍了热膨胀硅橡胶的性能和特点,热膨胀模成型工艺的原理,并应用其研制了复合材料制件。热膨胀硅橡胶适于制造热膨胀芯模。     

动态硫化技术及其发展

结合动态硫化技术的发展史,重点评述了国外80年代该技术的发展及其特点,揭示了TPV性能及特征与制备条件的关系;简介我国开发研究TPV的概况,并提出了看法。