中央空调的水处理

本文扼要介绍了中央空调循环冷却水和冷冻水系统中常见的问题及其原因,并对冷却水和冷冻水的处理程序作了初步的阐述.     

莫达非尼的绿色化学合成

采用[bm im]BF4离子液体作为反应溶剂,以二苯甲硫醇为原料,经醚化、氨解、氧化得到新型提神醒脑药物莫达非尼。讨论了不同的氯乙酸酯和反应温度对醚化反应收率的影响,讨论了不同的二苯甲硫乙酸酯对氨解反应收率的影响,及离子液体的回收使用。研究表明,采用氯乙酸甲酯作为醚化试剂,反应时间4 h,反应温度100℃,二苯甲硫醇∶氯乙酸甲酯=1∶1.5(摩尔比),室温下氨解反应20 h,二苯甲硫乙酰胺收率76%;采用过氧化氢作为氧化试剂,反应时间3 h,反应温度60℃,过氧化氢∶二苯甲硫乙酰胺=1∶1(摩尔比),莫达非尼收率79%,反应总收率可达48%。     

Modification of leather properties by grafting. I. Effect of monomer chain on the physico‐mechanical properties of grafted leather

Although leather has a number of desirable properties such as thermal stability and fire retardancey, in addition to high toughness, it has a few drawbacks such as weight, high water absorption, poor soil and rot resistance, and nonuniformity. If these defects are overcome, leather's usefulness would be further enhanced and its competitive position with respect to synthetics would increase. This study reports the physical and mechanical properties of buffalo leather after chemical graft copolymerization with ethyl acrylate, butyl acrylate, and 2‐ethyl hexyl acrylate using benzoyl peroxide as an initiator. The optimum conditions for grafting (e.g., monomer and initiator concentrations, temperature and time of grafting, and solvent leather ratio) were extensively investigated. The study achieved outstanding properties for buffalo leather in reduction of water uptake after grafting, especially on using 2‐ethyl hexyl acrylate and butyl acrylate monomers. FT‐IR and solid ¹³C‐NMR for leather before and after grafting confirmed the grafting process.© 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1478–1483, 2003     

硫醇自组装膜的电化学研究进展

综述了在金电极上硫醇自组装膜的电化学表征方法，性质和应用，介绍了自组装膜上的电子传递机理，并进行了简要的展望。     

Specificity of the pheromone system ofAdoxophyes orana andClepsis spectrana

The pheromone system of the summer fruit tortrix mothAdoxophyes orana (Fischer von Röslerstamm) consists of a mixture ofcis-9- andcis-11-tetradecen-1-ol acetate (cis-9- andcis-11-TDA, respectively) in a ratio of 9:1. Substitution of one or both of these compounds by related unsaturated acetates reduced the attractancy. Onlycis-11-TDA could be replaced bycis-11-tridecen-1-ol acetate (cis-11-TriDA), although the 9:1 mixture ofcis-9-TDA andcis-11-TriDA was less attractive in the field than the pheromone system itself. The major component of the pheromone system of the leaf rollerClepsis spectrana (Treitschke)(cis-9-TDA:cis-11-TDA=1:9) could also be replaced bycis-11-TriDA, again with some reduction in attractancy.     

Coking kinetics of a Cr2O3/Al2O3 catalyst during 1-butene dehydrogenation: Effect of H2 partial pressure

The influence has been studied of the partial pressure of hydrogen (0–30 kPa) upon the coking rate of a Cr₂O₃/Al₂O₃ commercial catalyst during 1-butene dehydrogenation. Coke deposition has been analysed using a monolayer-multilayer reversible coke growth model (MMRC model). This model provides good fits to the experimental data, within the range of partial pressure of H₂ studied, and allows us to estimate the main kinetic parameters involved in the coking-deactivation process. The results obtained reveal a dual effect of hydrogen: competition against 1-butene for the active sites and the removal of coke precursors from the catalyst surface. Bom effects diminish the coking rate as the H₂ partial pressure is increased.     

YL-1OO型自动加药装置在乙烯循环水场的应用

介绍了国产YL-100型自动加药装置功能及其在中国石化茂名石化乙烯工业公司乙烯循环水场的应用情况,结果表明其运行平稳,总磷测试数据可靠,可达到循环水自动加药控制的目的。     

Electrochemical performance of nanocrystalline Li3V2(PO4)3/carbon composite material synthesized by a novel sol–gel method

A novel sol–gel method based on V₂O₅·nH₂O hydro-gel was developed to synthesize nanocrystalline Li₃V₂(PO₄)₃/carbon composite material. In this route, V₂O₅·nH₂O hydro-gel, NH₄H₂PO₄, Li₂CO₃ and high-surface-area carbon were used as starting materials to prepare precursor, and the Li₃V₂(PO₄)₃/carbon was obtained by sintering precursor at 750 °C for 4 h in flowing argon. The sol–gel synthesis ensures homogeneity of the precursors and improved reactivity. The sample was characterized by XRD, SEM and TEM. X-ray diffraction results show Li₃V₂(PO₄)₃ sample is monoclinic structure with the space group of P2₁/n. The TEM image indicates that the Li₃V₂(PO₄)₃ particles modified by conductive carbon are about 70 nm in diameter. The Li₃V₂(PO₄)₃/carbon system showed that the discharge capacities in the first and 50th cycle are about 155.3 and 143.6 mAh/g, respectively, in the range of 3.0–4.8 V. The sol–gel method is fit for the preparation of Li₃V₂(PO₄)₃/carbon composite material which may offer some favorable properties for commercial application.     

碳钢贮热水箱的模拟腐蚀试验及涂层耐蚀性能研究

碳钢贮热水箱长期在30～80°C温变的热水环境中工作,易受到热水及水中杂质的腐蚀。研究了不同温度下Q235钢在自来水及含100μg/mLNaCl的自来水中的腐蚀速率。对裸钢及其涂覆相同厚度的不同涂层──酚醛环氧(自制)、钛纳米聚合物和改性聚乙烯后在70°C自来水中的极化曲线进行了比较。采用动电位扫描极化曲线测量和电化学交流阻抗谱法(EIS)分别对涂覆不同涂层的Q235钢进行了耐蚀性能研究。结果表明,3种防腐涂层均具有较佳的抗热水性,耐蚀能力较强,适宜对Q235钢贮热水箱进行防护。     

Sex pheromone specificity as a reproductive isolating mechanism among the sibling speciesArchips argyrospilus andA. mortuanus and other sympatric tortricine moths (Lepidoptera: Tortricidae)

MaleArchips argyrospilus (Walker) were maximally attracted to a 60404200 admixture of (Z)-11-tetradecenyl, (E)-11-tetradecenyl, (Z)-9-tetradecenyl and dodecyl acetates. The identification of (Z)-9-tetradecenyl acetate, in addition to the other 3 components reported previously, is the first report of a 4-component pheromone system in moths.Archips mortuanus Kearfoot, a sibling species, was maximally attracted to a blend of the same components, but in a 90101 mix of the tetradecenyl acetates. Among a number of tortricine moths that co-occur on apples and other hosts in New York, British Columbia, and elsewhere, differences in diel rhythms of attraction and seasonal distribution are insufficient to maintain reproductive isolation. Although the attractant systems of these species often possess components in common, males are maximally attracted to a speciesspecific blend. In tortricine moths attraction specificity appears to be a paramount mechanism for species partitioning.