聚偏氟乙烯/聚丙烯酸酯复合乳液的合成与性能

在含氟表面活性剂存在下，将聚偏氟乙烯超声分散于甲基丙烯酸甲酯和丙烯酸丁酯的混合单体中进行乳液聚合，制备了聚偏氟乙烯／聚丙烯酸酯复合乳液。采用动态光散射DLS、透射电镜TEM和红外光谱FT—IR对乳液组成及乳胶粒子的形态进行了表征，并对聚合物胶膜的性能进行了测试分析。结果表明：聚偏氟乙烯的加入，使复合乳液膜的拉伸强度显著增大，吸水率减小。     

DSC and synchrotron-radiation X-ray diffraction studies on crystallization and polymorphic behavior of palm stearin in bulk and oil-in-water emulsion states

The crystallization and polymorphic behavior of palm stearin (PS) in a bulk state and in oil-in-water (O/W) emulsion droplets (average diameter, 1.7±0.3 μm) was observed by using DSC, optical microscopy, and in situ X-ray diffraction with synchrotron radiation (SR-XRD). For the bulk sample the DSC measurements revealed three main exothermic peaks at approximately 31 (large), 21 (small) and 3°C (medium) on cooling, and broad endothermic peaks at approximate −3 (small), 8, 15 to 25 (medium), and 37 and 53°C upon heating. The SR-XRD patterns taken during cooling from 60 to −5°C clarified that the DSC exothermic peaks around 31 and 3°C corresponded to crystallization of the α form of high-melting and low-melting fractions, respectively, and that the occurrence of β′ corresponded to the small exothermic peak around 21°C. The XR-XRD patterns taken during heating from −5 to 60°C demonstrated that the DSC endothermic peaks corresponded to the following transformation processes: melting of α of the low-melting fraction (−3°C), melt-mediated transformation from α to ∇′ (15–25°C), melting of β′ (36°C), and melting of β (53°C) of the high-melting fraction. As for the O/W emulsion sample, the DSC and SR-XRD measurements during the cooling and heating processes exhibited basically the same behavior as that of PS in the bulk state, except that β′ did not crystallize during the cooling process, and the temperatures of crystallization of α, melt-mediated α→β′→β transformation, and melting of β were lower in the emulsion droplets than in the bulk state.     

AC/MMA接枝改性天然胶乳的制备及性能研究

以丙烯基氯（AC）和甲基丙烯酸甲酯（MMA）接技改性天然胶乳，采用正交试验方法研究引发剂用量，反应温度，单体配比，胶乳浓度等对接枝聚合反应中单体转化率和接枝率的影响，测试了改性天然胶乳的粘度，粘接性能及其硫化胶膜的力学性能，耐溶剂性和阻燃性，结果表明，适宜的接枝聚合反应条件为：引发剂异丙苯过氧化氢（CHP）和四乙烯五胺（TEP）的质量分数分别为0．58％和0．36％－0．72％（占橡胶质量的百分率）、反应温度为30℃、单体体积配比v（MMA）：v(AC）＝1．5：1、胶乳质量分数为53．3％，所得接枝胶乳粘度较高，粘结性能较好，耐溶剂性能剂，且有较好阻燃性。     

醋酸乙烯-丙烯酸无皂乳液共聚的研究

以醋酸乙烯(VAc)为主单体,丙烯酸(AA)为改性功能单体,以半连续加料方式进行无皂乳液共聚过程,得到了稳定且固含量为30%左右的乳液。探讨了功能单体AA含量、反应温度等对共聚的影响。采用FT-IR、粒径分析等方法对共聚物的组成、乳胶粒子的尺寸及分布进行了分析表征。结果表明:在(65±2)℃下聚合,所得乳液稳定性好、转化率高、反应完全,且随着功能单体AA含量的增加,乳液黏度上升、单体转化率下降、乳胶粒粒径变小且粒径呈单分散性。     

丙烯酸酯乳液的改性研究

制备了丙烯酸酯乳液,探讨了丙烯酸、N-羟甲基丙烯酰胺、二乙烯基苯、丙烯腈和三聚氰胺等不同改性剂对乳液性能的影响,在此基础上通过互穿网络聚合、化学共聚及物理共混等方法对乳液的性能进行了改性研究。     

改性聚醋酸乙烯酯乳液胶粘剂的研究进展

综述了国内外改性聚醋酸乙烯酯乳液胶粘剂的研究进展,并对聚醋酸乙烯酯乳液胶粘剂的改性研究提出了一些建议和展望。     

聚合物乳液的稳定性

简要讨论了乳液稳定性的原理,综述了乳液配方、乳胶粒组成和结构对聚合物乳液电解质稳定性、机械稳定性、冻融稳定性和贮存稳定性的影响。     

Soap‐free emulsion copolymerization of perfluoroalkyl acrylates in the presence of a reactive surfactant

Soap‐free emulsion copolymerization of perfluoroalkyl acrylate (FA)/methyl methacrylate (MMA)/n‐butyl acrylate (n‐BA) was carried out in the presence of sodium 2‐acrylamide‐2‐methyl propanesulfonate (AMPSNa) as a reactive surfactant and potassium persulfate (KPS) as an initiator. An analysis of the effects of concentration of AMPSNa, KPS, FA as well as polymerization temperature on the kinetic features (rate of polymerization) and colloidal characteristics (mean particle diameter, particle disperse index, particle numbers, and surface charge density) was followed. NMR, FTIR, AFM, and fluorine‐selective electrode analysis were used to characterize the composition and morphology of the FA copolymers. Both AFM analysis and contact angle measurements strongly implied that the fluorinated segments migrated to the outmost surface and created films with lower surface energy. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2438–2444, 2007     

20%单氰乳剂剂型研究

本文所叙述的单氰乳剂，是一种新的复配农药制剂。它不仅增效作用显著，对为害农作物的蚜虫和红蜘蛛有很强的杀灭作用；而且其剂型独特，为国内尚不多见的水包油型的复配农药新制剂－微乳剂。该制剂生产工艺简单，产品性能稳定，常温贮存一年，有效成分分解率低于１．５％；在６０℃至－５℃范围内，其产品均为均相透明的液体，且乳化性能十分优良。目前该品种已取得农药登记，正式投产。     

水性聚氨酯的合成及其改性的研究

研究了 n NCO/n OH、扩链剂 ( BD)及二羟甲基丙酸 ( DMPA)的含量对水性聚氨酯合成及涂膜性能的影响 ,确定了较佳的配方。并利用甲基丙烯酸酯类单体合成聚氨酯 -丙烯酸酯共聚复合乳液来改善水性聚氨酯的性能