Fe替代Co对AB5型贮氢合金循环稳定性的影响

用铸造及快淬的方法制备了稀土基AB5型Mm（NiMnSiAl）4．3Co0.6-xFex（x=0，0．1，0．2，0．3，0．4，0．5，0．6）贮氢合金，用XRD。TEM及SEM观测了铸态及快淬态的微观结构，测试了合金在铸态及快淬态下的电化学循环稳定性。研究了Fe替代Co对铸态及快淬态贮氢合金微观结构及循环稳定性的影响。研究结果表明，Fe替代Co对铸态及快淬态合金的相结构没有明显影响，但对合金的循环稳定性产生显著影响。Fe替代Co能不同程度地改善铸态及快淬态合金的循环稳定性，但对快淬态合金循环寿命的改善更加显著，导致这一结果的主要原因是Fe替代Co使快淬态合金的微观组织显著细化。     

Polyimides containing 4,4′‐bipyridinium units

New polyimides containing 4,4′‐bipyridinium units were synthesized by the reaction of bis(dichloromaleimide)arylene derivatives with 4,4′‐bipyridine in meta‐cresol. IR and ¹H‐NMR spectroscopy and elemental analysis as well confirmed their structures. The polymers were characterized by viscometric measurements, softening points, and thermogravimetric data. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2091–2100, 2004     

高取代度羧甲基淀粉的合成及性能研究

以木薯淀粉、氯乙酸为原料,异丙醇为溶剂,多次加碱工艺合成高取代度羧甲基淀粉(CMS).通过正交实验考察了反应温度、反应时间、反应物料浓度、水的用量对取代度的影响,对影响羧甲基淀粉醚取代度的各因素进行了优化.制备取代度DS＞1.3的木薯羧甲基淀粉的原料最佳摩尔比:力[木薯淀粉(以吡喃环单元AGU计)]:n(氯乙酸)=1:3,n(氢氧化钠):n(氯乙酸)=2.5:1,醇与水的体积比为19:1,碱化温度30℃,碱化时间60 min,醚化温度50℃,醚化时间120 min.     

类质同象置换对蒙脱石水化性能的影响

研究了10个蒙脱石样品在蒸馏水中水化性能——自由膨润量的差异。样品来自不同产地或不同矿层,具有不同的类质同象置换。研究前对样品进行了提纯和钠化处理。实验结果表明,蒙脱石膨润性与其类质同象置换情况有密切的关系,膨润量与由蒙脱石结构成分计算得到的品格常数6有明显的相关性。讨论了膨润量差异的原因。     

Structural, electrochemical and thermal properties of LiNi0.8−yTiyCo0.2O2 as cathode materials for lithium ion battery

Multiple substitution compounds with the formula LiNi_0.8−yTi_yCo_0.2O₂ (0≤y≤0.1) were synthesized by sol-gel method using citric acid as a chelating agent. The effects of titanium substitution on the structural, electrochemical and thermal properties of the cathode materials are investigated. A solid solution phase (R-3m) is observed in the range of 0≤y≤0.1 for the titanium-doped materials. X-ray photoelectron spectroscopy (XPS) shows that there are Ni³⁺, Ni²⁺, Co³⁺, Co²⁺ and Ti⁴⁺ five transition metal ions in titanium-doped materials. Rietveld refinement of X-ray diffraction (XRD) patterns indicates that titanium substitution changes the materials’ structure with different cationic distribution. An increase of the Ni/Co amount in the 3a Li site is found with the addition of titanium amount. An improved cycling performance is observed for titanium-doped cathode materials, which is interpreted to a significant suppression of phase transitions and lattice changes during cycling. The thermal stability of titanium-doped materials is also improved, which can be attributed to its lower oxidation ability and enhanced structural stability at delithiated state.     

二(2-氨基乙基)-(3-氨基丙基)胺的合成新方法

以二(氰基甲基)胺及丙烯腈为原料，通过亲核加成、氢化反应合成了不等臂有机多胺化合物二(2-氨基乙基)-(3-氨基丙基)胺，标题化合物及其中间产物经多种谱学手段表征确证。在优化条件下，产物的总收率为67％，含量99.5％(HPLC)。     

Hyperbranched Polymers Containing Cyclopentadienyliron Complexes

A number of hyperbranched polymers containing cyclopentadienyliron moieties were prepared using the A₂+B₃ method. The A₂ compounds used were common diols, dithiols or dichloroarenecomplexes. B₃ compounds included either prepared star-shaped molecules or a purchased triol. The effect of the reaction conditions on the properties of the products was probed. Analysis of the prepared polymers was conducted using ¹H and ¹³C NMR, viscometry, differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Viscometry values were generally found to be low, in the range of 0.175–0.300 dl/g. TGA showed losses starting at approximately 230°C and ending at 280°C, corresponding to the decomposition of the cyclopentadienyliron moiety. Degradation of the polyether backbone was found to occur starting at 390–567°C. Glass transition temperatures were found to be between 60 and 134°C, whereas melting temperatures ranged from 155 to 190°C.     

Bromine addition and successive amine substitution of mesoporous ethylenesilica: Reaction, characterizations and arsenate adsorption

Bromination and subsequent ethylenediamine substitution of the CC double bond in mesoporous ethylenesilica were carried out to explore the characteristics of this periodic mesoporous organosilica. The structures of the products (BrPMO and EDA–BrPMO, respectively) were analysed by IR, Br K-edge EXAFS and NMR spectroscopies, as well as X-ray diffraction and nitrogen adsorption. We showed (1) that the formulae of the two products that formed were [CHBrSiO_1.5]_0.45[CHSiO_1.5]_0.55 and [NH₂CH₂CH₂NHCHSiO_1.5]_0.05 [CHBrSiO_1.5]_0.40[CHSiO_1.5]_0.55, respectively, (2) that the addition of Br₂ at room temperature occurred on the CC double bonds with disturbing the framework structure, (3) that IR absorption band of CC bonds that reacted with Br₂ is significantly different from that of inactive CC bond, (4) that the length of the C–Br bond was considerably longer than in conventional alkyl bromides, and (5) that a large proportion of the ν(C–Br) band remained at the same position in the IR absorption spectrum after the ethylenediamine (EDA) substitution, while a new ν(C–Br) absorption also appeared. The mechanisms of these reactions are discussed at both the micro and mesoscopic levels.

Arsenate adsorption on EDA–BrPMO, in which the EDA is directly bound to the “surface” of the mesopores, was compared with adsorption on EDA–Pr–PMO, which was prepared by the direct synthesis of 3-chloropropyl-functionalized mesoporous ethanesilica followed by the substitution of Cl with EDA. The strength of the adsorption, as measured with the distribution coefficient, was greater for the former adsorbent than the latter. The origin of this difference was attributed to the distance between amino group and the surface.     

改性纤维素增强丙烯酰胺水凝胶的合成与拉伸性能研究

采用水媒法制备了低取代度羧甲基纤维素,并用接枝聚合法制备了改性纤维素/丙烯酰胺水凝胶,考察了单体质量比、取代度等对水凝胶拉伸性能的影响.结果表明:对于接枝聚合反应,采用低取代度羧甲基纤维素可以提高纤维素的有效用量;当交联剂用量为180 mg/L、引发剂1 300 mg/L、低取代度羧甲基纤维素和丙烯酰胺质量比在1∶4 ～ 1∶4.5之间、单体质量分数为30%时,合成水凝胶的拉伸强度达到0.28 MPa;在此基础上,适量添加15%的淀粉可使水凝胶拉伸强度达到0.47 MPa;添加1%二氧化钛可使水凝胶拉伸强度达到0.38 MPa.     

Synthesis and Polymerization of Cationic bis(cyclopentadienyliron)arene Complexes Containing Arylazo Dyes

The synthesis of the title complexes was achieved via the reaction of -p-dichlorobenzene- -cyclopentadienyliron cations with 4,4′-bis(4-hydroxyphenyl)valeric acid to produce the diiron complexes which were then reacted with a number of arylazo dyes to give cationic bis(cyclopentadienyliron)arene complexes containing the arylazo dyes. These iron-containing monomers were subsequently polymerized via nucleophilic aromatic substitution using 1,8-octanedithiol, 4,4′-thiobisbenzenethiol, or bisphenol A to produce the desired coloured cationic organoiron polymers. The weight – average molecular weights were estimated to range from 11,800 to 31,600. UV–vis studies conducted in dimethylformamide (DMF) showed that the metallated polymers exhibited of 412–491 nm. Addition of HCl to the polymer solution caused a bathochromic shift into the range of 515–530 nm. Thermogravimetric analysis (TGA) revealed that the iron moieties were cleaved between 205 and 248 °C while the polyether/thioether backbone degraded between 380 and 613 °C. Differential scanning calorimetry (DSC) showed that the polymers exhibited glass transition temperatures (Tg) ranging from 106 to 184°C.This paper is dedicated to Professor Richard J. Puddephatt in recognition of his outstanding contribution to the field of metal-containing polymers.