稀土氧化物掺杂ZnO-Bi2O3系压敏陶瓷"软心"现象的研究

掺杂稀土氧化物的大尺寸ZnO压敏陶瓷具有明显的“软心”特征,即内部电位梯度远远低于表层。经过XPS关于Zn结合能的研究、SEM关于杂质分布状况的研究及XRD关于相态的研究表明:试样内部氧和添加剂的匮乏及晶态的不完善是影响内层电位梯度的三大主要因素。     

A novel clock generation algorithm for system-on-chip based on least common multiple

Due to increase in the number of Intellectual Property (IP) cores, clock generation in current day System-on-Chips (SoCs) is facing a crisis. The conventional method of using a dedicated Phase Locked Loop (PLL) to generate the clock for each IP core is becoming inefficient in terms of power and cost. We propose an algorithm based on Least Common Multiple (LCM) to minimize the number of PLLs required to generate the clocks for the IP cores in a SoC. This is done by finding an Optimum Operating Frequency (OOF) for each IP core within 10% below the maximum operating frequency of the core. The OOF is chosen such that the LCM of the OOF of all the IP cores is minimized. Simulated annealing is used to find the LCM. This LCM is the crucial high frequency from which maximum number of clocks can be derived by clock dividers.     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

Critical evaluation of coupling particle size distribution with the shrinking core model

The shrinking core model (SCM) is widely used to model fluid-solid reactions such as the leaching of metals from minerals. In most cases, however, the particle size distribution (PSD) of the solid material was disregarded. In this paper the erroneous shift in the control regime when neglecting PSD was quantified and the dependence of the shift on the coefficients of variation (CV) and the type of PSD was analysed. By coupling the SCM with a Gamma PSD, it was found that neglecting the PSD would shift the control regime from chemical reaction to inert/ash layer diffusion, when the CV was between 0.7 and 1.2. For a system controlled by liquid film diffusion, neglect of the PSD, would shift the control regime to chemical reaction when CV is between 0.3 and 0.7 or to inert/ash layer diffusion when CV is greater (0.9-1.5). It was therefore postulated that some researchers had unknowingly made invalid conclusions about the control regime due to the neglect of PSD. However, an inert/ash layer diffusion-controlled process was insensitive to the neglect of PSD. When CV<0.3, neglect of the PSD would not cause any erroneous shifts, irrespective of the control regime. Experimental data confirmed the observation. For a given CV, the deviation in the fraction reacted from the mono-PSD increases with CV and decreases with time. The maximum deviation, which occurs at the beginning, is about 10% with a gamma PSD of CV=0.3. The percent deviation is dependent of the type of PSDs. Gamma PSD gives the lowest deviation while Gaudin-Schuhmann results in the largest deviation (maxi. ∼19%, with CV=0.3) in the first half of dissolution process. Log-normal distribution gives a larger deviation than gamma but quickly approaches the latter with time. The deviation for Rosin-Rammler is between log-normal and Gaudin-Schuhmann. For systems with CV less than 0.3, the SCM can be fairly used without considering PSD. When CV is greater than 0.3, particularly in the early stage of a dissolution process with a PSD other than gamma, PSD should be included to avoid substantial errors.     

Toughening of vinylester–urethane hybrid resins through functionalized polymers

Liquid nitrile rubber, hyperbranched polyester, and core/shell rubber particles of various functionality, namely, vinyl, carboxyl, and epoxy, were added up to 20 wt % to a bisphenol‐A‐based vinylester–urethane hybrid (VEUH) resin to improve its toughness. The toughness was characterized by the fracture toughness (K_c) and energy (G_c) determined on compact tensile (CT) specimens at ambient temperature. Toughness improvement in VEUH was mostly achieved when the modifiers reacted with the secondary hydroxyl groups of the bismethacryloxy vinyl ester resin and with the isocyanate of the polyisocyanate compound, instead of participating in the free‐radical crosslinking via styrene copolymerization. Thus, incorporation of carboxyl‐terminated liquid nitrile rubber (CTBN) yielded the highest toughness upgrade with at least a 20 wt % modifier content. It was, however, accompanied by a reduction in both the stiffness and glass transition temperature (T_g) of the VEUH resin. Albeit functionalized (epoxy and vinyl, respectively) hyperbranched polymers were less efficient toughness modifiers than was CTBN, they showed no adverse effect on the stiffness and T_g. Use of core/shell modifiers did not result in toughness improvement. The above changes in the toughness response were traced to the morphology assessed by dynamic mechanical thermal analysis (DMTA) and fractographic inspection of the fracture surface of broken CT specimens. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 672–680, 2002; DOI 10.1002/app.10392     

两种模具型芯结构的比较

对比两种高冲压开关件型芯拼块结构的优劣和设计要点。     

水性核（PMMA）／壳（PU）聚氨酯丙烯酸酯杂化乳液的合成研究

合成高Tg低成膜温度的水性聚氨酯丙烯酸酯杂化乳液,研究了合成工艺、—N CO和—O H的比例、丙烯酸酯含量等因素对乳液稳定性和其他性能的影响。     

Synthesis and characterization of poly(butyl acrylate)/silica and poly(butyl acrylate)/silica/poly(methyl methacrylate) composite particles

Poly(butyl acrylate)/poly(methyl methacrylate) (PBA/PMMA) core–shell particles embedded with nanometer‐sized silica particles were prepared by emulsion polymerization of butyl acrylate (BA) in the presence of silica particles preabsorbed with 2,2′‐azobis(2‐amidinopropane)dihydrochloride (AIBA) initiator and subsequent MMA emulsion polymerization in the presence of PBA/silica composite particles. The morphologies of the resulting PBA/silica and PBA/silica/PMMA composite particles were characterized, which showed that AIBA could be absorbed effectively onto silica particles when the pH of the dispersion medium was greater than the isoelectric potential point of silica. The critical amount of AIBA added to have stable dispersion of silica particles increased as the pH of the dispersion medium increased. PBA/silica composite particles prepared by in situ emulsion polymerization using silica preabsorbed with AIBA showed higher silica absorption efficiency than did the PBA/silica composite particles prepared by direct mixing of PBA latex and silica dispersion or by emulsion polymerization in which AIBA was added after the mixing of BA and silica. The PBA/silica composite particles exhibited a raspberrylike morphology, with silica particles “adhered” to the surfaces of the PBA particles, whereas the PBA/silica/PMMA composite latex particles exhibited a sandwich morphology, with silica particles mainly at the interface between the PBA core and the PMMA shell. Subsequently, the PBA/silica/PMMA composite latex obtained had a narrow particle size distribution and good dispersion stability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3425–3432, 2006     

Influence of processing on ethylene propylene block copolymers (II): Fracture behavior

The present work investigates the relationships between the microstructural state and fracture properties in commercial polypropylene‐based materials. In this case an isopolypropylene homopolymer and three ethylene propylene block copolymers (EPBC) with different ethylene content (EC) have been studied. A variety of morphologies were obtained by a combination of several processing methods (injection molding, injection molding‐annealing, and compression molding) and thickness. Fracture behavior of deeply double‐edged notched specimens was evaluated by scanning electron microscopy (SEM) and by the essential work of fracture (EWF) method, analyzing the influence of processing, thickness (t), EC, and orientation respect to melt flow direction (MD and TD). The testing direction and EC are the most relevant variables that affect the ability of the crack tip to deform plastically during the crack propagation, determining the final fracture behavior. The fracture parameters obtained with the EWF method, specific EWF, w_e, and plastic item, βw_p, have proved to be very sensitive to the processing induced morphology, finding interesting relationships between such morphologies (characterized by crystallinity index, orientation level, and skin/core ratio) and the fracture parameters of the plaques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2714–2724, 2006     

旋流器内空气核的形成机理和形状的实测研究

首次采用先进的高速摄象机对旋流器内空气核的出现、发展直至形成的整个过程以及形成后的形状进行了全面系统的实测研究。研究发现空气核的形成经历了孕育、发展及形成三个不同的阶段;在旋流器内不同的高度,空气核的形状有所不同,在底流口上端发生最大程度的偏摆,而在溢流管内出现类似“葫芦”形状;旋流器的进口流量和锥角对空气核的形成过程及形状尺寸有着重要的影响。空气核的形成运动过程为一随机过程,这是造成分离过程具有随机特性的主要因素之一。