PVC薄膜—尼龙织物复合用胶粘剂的研制

介绍 PVC 薄膜—尼龙织物复合用胶粘剂试制的情况。主要包含胶粘剂主体聚合物、增粘组分、增塑剂、反应促进剂及其它助剂的选择。并阐述了胶粘剂的放大试验情况及应用工艺条件。     

抽油杆尼龙扶正器的研制与应用

分析了油管和抽油杆产生偏磨的原因，指出防止油管和抽油杆偏磨的有效措施是采用抽油杆扶正器。针对现有扶正器存在的问题，研制了具有扶正和刮蜡功能的新型抽油杆尼龙扶正器。新型扶正器分活动式和热固式两种。前者是由形状相同、内壁带凸校的两部分扣在一起，靠锁齿锁紧固定在抽油杆杆体上，而后者是将扶正器注塑在抽油杆杯体上。介绍了两种新型扶正器的规格和主要技术指标。热固式尼龙扶正器的现场使用情况表明，抽油杆断脱率大大降低，油管断裂、穿孔事故减少，检泵周期延长。     

Simulation of continuous solid‐phase polymerization of nylon 6,6. III. Simplified model

Solid‐phase polymerization (SPP) reactors are used to increase the degree of polymerization (DP) during nylon 6,6 production. In previous articles, a reactor model with partial differential equations (PDEs) in time and two spatial dimensions was developed to describe dynamic changes in polymer property profiles (DP, temperature, and moisture content) over the height of the reactor and within the polymer particles. In the current article, a simplified model is developed by deriving appropriate expressions for heat‐ and mass‐transfer coefficients and performing a lumped heat‐ and mass‐transfer analysis. Using this approach, the radial dimension is removed from the PDEs, so that the effort required to solve the model equations is substantially reduced. Predictions of the complex and simplified models are compared through simulation of two different start‐up processes. Good agreement between simplified and complex models is obtained, indicating that the simplified model can be used in place of the complex model if the polymer properties profiles within individual particles are not of particular concern to the model user. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3701–3712, 2003     

补强剂和共混工艺对PA/PVC/NBR三元共混弹性体性能的影响

在选择三元共聚尼龙（PA）、聚氯乙烯（PVC）、丁腈橡胶（NBR）为主体材料，制备PA／PVC／NBR（10／30／60）三元共混弹性体的工作基础上，进一步探讨了填料品种和用量，共混温度，加料顺序等因素PA／PVC／NBR三元共混弹性体的影响。试验结果表明：在PA／PVC／NBR（10／30／60）共混体系中，补强型填料的补强效果优于非补强型的填料，6种填料补强效果依次是：快压出炭黑＞半补强炭黑＞白炭黑＞活性重质，CaCO3＞陶土＞滑石粉，快压出炭黑的适宜用量是20－50份。在制备PA／PVC／NBR三元共混物时，适宜的共混温度是122－140℃，并且采用二段法混工艺制得的共混物性能优于采用一段法共混工艺。     

Properties of bioriented nylon 6 films related to film production technology

Four production steps, extrusion, blowing, stabilization, and finishing, are involved in the manufacture of biorented nylon 6 films. The films obtained after each step were studied by wide‐angle diffraction X‐rays, IR analysis, and density measurements. Orientation in the amorphous phase was evaluated by thermal retraction. Free volume was investigated by positron annihilation spectroscopy. Mechanical properties were tested by tensile tests, and permeability was tested with isopiestic permeameters. Quenching, after extrusion, generated an unstable γ crystalline phase and an amorphous phase. Blowing transformed the unstable γ phase into the thermodynamically stable α phase and increased the chain orientation; stabilization increased α phase crystals, favored hydrogen bond formation and, therefore, the mechanical properties, leaving unchanged the chain orientation; the final treatment increased the mechanical properties. The film permeabilities to O₂, N₂, and CO₂ were practically unchanged after each production step; this result may be explained by considering that the nanoholes, present in the films and responsible for the diffusion inside the polymer, maintained practically constant their radius, whereas their number concentration decreased slowly after thermomechanical treatments. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 559–571, 2002     

阻燃MC尼龙的研制

通过分析，考察数种阻燃剂对ＭＣ尼龙聚合的影响，总结了ＭＣ尼龙用阻燃剂的特点，筛选出三种适用性较强的阻燃剂，并对其阻燃效果进行了测试和分析。     

尼龙6纺织梭专用料及其应用

介绍尼龙６纺织梭专用料的配方、工艺、性能及加工和应用。实践表明专用料配方合理、工艺可行性能优良、以其注射成型的纺织梭性能可靠、生产效率高、使用寿命长、附加值高、完全可替代压缩水生产纺织梭，具有工业推广应用价值。     

PA6/SANMAH/GF复合材料的制备及其性能研究

采用双螺杆挤出机通过熔融共混制备了尼龙6／（苯乙烯／丙烯腈／顺丁烯二酸酐）共聚物／玻璃纤维（PA6／SANMAH／GF）复合材料，测试了材料的拉伸强度、弯曲强度、弯曲弹性模量、缺口冲击强度、热变形温度、吸水率、熔点和熔融焓，并与GF增强PA6（PA6／GF）复合材料和GF增强PA6／（苯乙烯／丙烯腈）共聚物（PA6／SAN／GF）复合材料进行了性能对比。结果表明，在PA6与SANMAH的质量比为100：3—30时，PA6／SANMAH／GF复合材料的拉伸强度与PA6／GF复合材料相当，但高于PA6／SAN／GF复合材料，弯曲强度和弯曲弹性模量高于PA6／GF和PA6／SAN／GF复合材料．缺口冲击强度高于PA6／GF复合材料，但低于PA6／SAN／GF复合材料；在PA6与SANMAH的质量比为100：40时，PA6／SANMAH／GF复合材料的拉伸强度、弯曲强度和缺口冲击强度明显降低；在整个试验范围内，PA6／SANMAH／GF复合材料的热变形温度比PA6／GF和PA6／SAN／GF复合材料低4～7℃；吸水率随着SAN-MAH用量的增加而逐渐减小。     

Polar and Non-Polar Solvent Permeation Resistance of Blow-Molded Bottles of Polyethylene/Blends of Modified Polyamide and Polyamide 6 Clay Nanocomposite

Investigations on white spirit and acetone permeation resistance of modified polyamide and nylon 6 clay (MPANYC) blends and their corresponding polyethylene/MPANYC bottles were reported in this study. The white spirit and acetone permeation resistance of MPANYC sheets improve consistently with increasing NYC contents present in MPANYC resins after blending nylon 6 clay (NYC) in modified polyamide (MPA) resins. However, the order of barrier improvement of the PE/MPANYC and PE/NYC bottle specimens is not corresponding to the order of barrier improvement of the MPANYC and/or NYC barrier resins added in PE. The blow-molded PE/NYC bottle specimen exhibits similarly worse white spirit and acetone solvent permeation resistance as the PE bottle specimen, wherein no clearly formed NYC laminas but only dispersed NYC droplets or agglomerates were found on the fracture surfaces of the PE/NYC bottles. However, after blending optimum compositions of MPANYC in PE, the PE/MPANYC bottles with demarcated MPANYC laminas exhibit significantly better white spirit and acetone permeation resistance than the PE/MPA bottle, wherein the white spirit and acetone permeation rates of the PE/MPA₈NYC₁ bottle are about 1.3 and 1.4 times slower than those of the PE/MPA bottle, respectively. In order to understand these interesting barrier properties of PE/MPANYC and PE/NYC bottles, rheological, thermal, wide angle X-ray diffraction and morphological properties of the base MPANYC and NYC resins and their corresponding morphology present in the blow-molded bottles were investigated.     

Application of CO2 laser heating zone drawing and zone annealing to nylon 6 fibers

Nlon 6 fibers were zone drawn and zone annealed by using a continuous wave carbon dioxide laser to develop their mechanical properties. A laser‐heating zone drawing was carried out under a applied tension of 35.4 MPa at a power density of 9.65 W · cm^?2, and then the zone‐drawn fiber was annealed. A laser‐heating zone annealing was carried out in two steps at a power density of 9.65 W · cm^?2; the first step was carried out under 423 MPa and the second under 517 MPa. The treating temperature of the fiber heated by the CO₂ laser was measured by using an infrared thermographic camera equipped with a magnifying lens. The treating temperature at the zone drawing is 138°C, and those at the first and the second zone annealing are 121 and 125°C, respectively. The second laser‐heated zone‐annealed fiber has a birefringence of 65.2 × 10^?3, a degree of crystallinity of 54%, and a storage modulus of 21 GPa at 25°C. Wide‐angle X‐ray diffraction patterns for the laser‐heated zone‐drawn and the zone‐annealed fibers show (200) reflection and (002/202) doublet due to only an α form on the equator. The laser‐heated zone‐drawn fiber has a melting endotherm peaking at 216°C and a trace of shoulder on the higher temperature side of its peak, and the laser‐heated zone‐annealed fibers have a single melting endotherm peaking at 216°C. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1711–1716, 2002