水对食品相变的影响

水是食品材料中最重要的成分。本文介绍了食品中水的性质以及水对食品相变的影响，并从水活性、水的吸附性以及水的增塑性三方面描述了水在食品相变中所起的作用。另外，还着重分析了水对食品冻结温度的影响。     

原子吸收次灵敏线法直接测定土壤中Fe、Mn

用原子吸收次灵敏线法塞曼效应扣除背景测定土壤中Fe、Mn,实验结果表明:此方法有较好的准确度,精密度,操作简单,适合一般土壤中Fe、Mn的测定。     

现代电子产品焊接质量的检测技术

介绍了现代电子产品焊接质量的检测技术,以及用于检查焊点质量和组装板(SMA)功能的测试仪器的工作原理及测试能力.目前常见和广泛使用的焊接质量检测方法是人工目测检查,其主要问题是其主观性,只能用来检测电子元件的形状、尺寸、颜色、表面特征及焊点的外观质量;自动光学检测(AOI)可以在整个过程中发现和纠正缺陷,但只是外在的焊点缺陷;激光/红外线组合式检测系统、X射线检测系统可以分析焊点微米级水平的缺陷,能找出其他检测所不能可靠地发现的缺陷,包括空洞、焊点形状差和冷焊锡点等;另外,X射线检测系统能一次测试单面或双面电路,准确地定位缺陷,获取工艺参数,例如锡膏厚度等.     

光纤荧光传感器衰减寿命的加权对数拟合法

荧光寿命的检测是荧光光学传感器的核心内容，国际上尝试了多种方法来拟合这种理论上为单指数衰减信号的荧光衰减曲线。这些方法包括非线性函数标准拟合方法。即Levenburg-Marquardt方法，以及Prony方法、FFT方法，对数拟合法等等。为了克服在实际应用中发生的信号退化，需要在测量信号衰减寿命的同时测量信号的初始强度。文章介绍了一种加权的对数拟合法，经计算机仿真及实际数据测试均可以得到和Levenburg-Marquardt方法非常接近的结果，且拟合时间大大缩短，测量稳定性大大提高。仿真测试及具体实验测试结果显示了这种方法的有效性。该方法不仅与Levenburg-Marquardt方法的偏差曲线非常相似，而且实验测得的荧光寿命与Levenburg-Marquardt方法偏差在0．2％以内。     

液晶光阀光电导层光吸收系数的研究

用化学气相沉积法制备了液晶光阀中光电导层———非晶硅薄膜,从实验中得出最佳制备工艺的参数取值。给出了用包络线法测量非晶硅薄膜光吸收系数的原理,测量了样品的光吸收系数随波长的变化规律。得到样品在最佳工艺条件下的光吸收系数高于1×103cm-1。     

InP基应变补偿结构偏振不灵敏半导体光放大器制作的研究

为了制备偏振不灵敏的半导体光放大器(SOA)，将有源区设计为由4个压应变、3个张应变阱层及晶格匹配的垒层InGaAsP交替组合而成的应变补偿结构。器件做成带有倾角的扇形脊形波导结构，避免了常规制作SOA的复杂工艺。对样品3在80～125mA电流范围内，获得了偏振灵敏度≤0．6dB．最小可达0．1dB；较大的电流范围内FWHM值为40nm。     

Full Complex Amplitude Digital Holograms： Design, Fabrication and Optical Characterization

Diffractive optical elements have a large number of industrial applications, such as beam shaping and optical filtering. Traditionally, these elements modulate the phase of the incoming light or its amplitude, but not both. To overcome this limitation, full complex-amplitude modulation diffractive optical elements were developed. Well-established integrated circuit fabrication steps were employed to fabricate the devices with high precision. Using this approach, the new element‘s optical performances are improved also for near field operations. With this device it is possible to obtain 100% efficient spatial filtering and low noise reconstructed images.     

The Simulation of Impact Loads on Beam-type Structures using a Pseudo-dynamic Procedure

Abstract:  This study proposes an alternate method for the analysis of beams with solid cross-section or built as a framed structure and subjected to transverse impact loads from an external striker. The procedure used in the analysis is a combination of two essential tools using pseudo-dynamic techniques. The method reported here involves only one degree of freedom for the structure modelling and assumes an elastic contact between an external striker and the beam structure, which in reality does not happen. As only one degree of freedom is considered in the analysis, some important limitations are inherent to the method proposed here. Essentially, there is the difficulty of modelling the displacement field associated with the transient structure behaviour accurately, as a consequence of fast-rate impact loads. Another difficulty faced by the method refers to a local structure behaviour associated with contact loads. The present method can deal with large displacements in transversely loaded beams associated to a collapse mechanism having a simple geometry and defined with precision from a single parameter. This ensures reasonable accuracy in the evaluation of the strain energy absorbing capacity of transversely impacted beam structures using a single degree of freedom model in a pseudo-dynamic procedure.     

BPxN1-x薄膜的制备及磷元素对其光学能隙的影响

本文从应用出发，选择光学石英为衬底，采用热丝辅助射频化学气相沉积的方法沉积BPxN1—x薄膜，对样品进行了X射线衍射(XRD)、扫描电子显微镜(SEM)、紫外—可见等测试。XRD、SEM结果显示薄膜多晶态，表面形貌随时间变化，最终为胞状；紫外—可见光光谱结果显示BPxN1—x薄膜的紫外吸收边随沉积时间的加长、PH3流量的增加而向长波长方向移动。因此，该材料的光学能隙可以通过生长工艺适当调整。另外，BPxN1—x薄膜与液晶层能较好匹配等特性更使其适用于紫外空间光调制器。     

Dynamic Waveband Switching in WDM Mesh Networks Based on a Generic Auxiliary Graph Model

Waveband switching (WBS) is a promising technique to reduce the switching and transmission costs in the optical domain of a wavelength-division multiplexing (WDM) network. This paper considers the problem of provisioning dynamic traffic using WBS in a WDM mesh network. The network of interest is a homogeneous WBS network, where each node has the functionality of WBS. The problem is called the dynamic WBS problem, which involves searching waveband-routes or wavelength-routes for the dynamically arriving traffic requests. The objective is to minimize the total switching and transmission costs in the optical domain. To solve the dynamic WBS problem, an auxiliary graph model capturing the network state is proposed. Based on the auxiliary graph, two heuristic on-line WBS algorithms with different waveband grouping policies are proposed, namely the wavelength-first WBS algorithm based on the auxiliary graph (WFAUG) and the waveband-first WBS algorithm based on the auxiliary graph (BFAUG). Simulation results indicate that WBS is an attractive technique which reduces the overall switching and transmission costs by up to 30% in the network. The results also show that the WFAUG algorithm outperforms the BFAUG algorithm in terms of port savings and cost savings.