有机锡化合物引发D,L-丙交酯的开环聚合

D,L-丙交酯在有机锡化合物四苯基锡(Ph4Sn)、三正丁基醋酸锡(Bu3SnOAc)、辛酸亚锡(SnOct2)等催化剂引发下开环聚合,得到高分子量的聚D,L-乳酸,讨论了聚合单体D,L-丙交酯纯度、聚合温度、聚合时间、聚合体系真空度以及引发剂有机锡催化剂与聚合单体D,L-丙交酯的比例对聚D,L-乳酸合成的影响,通过红外光谱和核磁共振光谱对聚D,L-乳酸的结构进行了表征。实验结果表明,D,L-丙交酯开环聚合反应的较佳工艺路线是:D,L-丙交酯重结晶5次,聚合温度140℃,聚合时间24 h,聚合体系真空度13.3~133.3 Pa,引发剂有机锡催化剂与单体D,L-丙交酯比例0.2‰~0.5‰,此时聚D,L-乳酸的粘均分子量最高,分别达到32.46×104,33.43×104和41.36×104。     

NIT-Ph-p-BEN氮氧自由基的制备及催化降解性

以对醛基苯甲酸为原料，通过醛酸与2,3-二甲基-2,3-二羟胺基丁烷缩合，再经NaIO4氧化最终制得4-(4,4,5,5-四甲基-1,3-二氧化物)咪唑基-1-苯甲酸（NIT-Ph-p-BEN氮氧自由基）。采用FTIR、UV、ERP（电子顺磁共振波谱仪）和元素分析等对其结构进行表征；通过催化降解废水中有机染料甲基橙、甲基蓝和罗丹明B对其催化活性进行了评估。结果表明，当甲基橙、甲基蓝和罗丹明B浓度为15 mg/L，NIT-Ph-p-BEN质量浓度为0.15 g/L，H2O2浓度为30 mmol/L时，NIT-Ph-p-BEN对甲基橙有更好的催化降解性，仅在1 h内甲基橙的降解率达到94.26%。此外，反应机理表明，H2O2有助于实现NIT-Ph-p-BEN自由基的再生和循环利用。     

Fenton试剂处理苯酚和甲醛废水的研究

用H2O2同Fe^2 结合的Fenton试剂处理有机废水是一种经典的催化氧化法，这种方法适合于处理废水中高浓度、难降解的有机物质。主要研究了Fenton试剂处理含苯酚和甲醛有机废水样的反应机理和影响因素，试验结果表明：废水中苯酚和甲醛的去除率均可达到95％以上，COD去除率达到85％以上，表明用Fenton法处理含苯酚和甲醛的有机废水是一种非常有效的方法。     

有机试剂结构与性质的研究：Ⅻ.有机试剂的pKa与改进的Hammett方程

有机试剂的ｐＫａ是其重要物化参数，是有机试剂酸碱性的度量，直接决定配合物的稳定性。应用改进的Ｈａｍｍｅｔｔ方程处理取代基常数与ｐＫａ的关系，得到满意的结果。     

Degree of crosslinking and mechanical properties of crosslinked poly(vinyl alcohol) beads for use in solid-phase organic synthesis

The limited swellability in polar media of the commonly used polystyrene/divinylbenzene (PS-DVB) support materials for solid-phase organic synthesis has led to the development of novel, highly swellable hydrophilic gels designed for use in aqueous or polar media. Poly(vinyl alcohol) beads crosslinked with epichlorohydrin (PVA-EP) were prepared by a two-step inverse-suspension polymerization method. While it is known that the morphology of the resulting beads can be controlled by the ratio of EP versus PVA as well as by the pre-crosslinking time, the actual degree of crosslinking of the beads and their mechanical properties remain unknown. It is therefore the purpose of this study to evaluate the actual degree of crosslinking of beads prepared with different quantities of crosslinker in the feed by spectroscopic (Raman, nuclear magnetic resonance) and chemical (functional group loading) methods. The mechanical properties of these swollen PVA-EP beads will be evaluated by single-bead unconfined compression in solvents such as water, N,N-dimethylformamide (DMF), and tetrahydrofuran (THF) and compared to model PS-DVB beads commonly used for solid phase synthesis.     

Production of nanoparticles of copper compounds by anodic dissolution of copper in organic solvents

The anodic behaviour of copper was investigated in ethanol solution containing LiClO₄, LiCl electrolyte and water. The type of electrolyte and the water content influences the mechanism of the anodic process and the formation of anodic products. In LiClO₄ electrolyte the dissolution of copper is related to the oxidation of Cu(I) to Cu(II). In solutions of LiCl the etching of copper begins with the creation of soluble complexes of Cu(I) with chloride ions and solvent molecules. At potentials above 0.4 V the formation of alkoxides was observed in both solutions, characterized by a yellow tint. On the other hand, above 0.8 V (i.e. above the equilibrium potential of alcohol oxidation) copper dissolution is accompanied by the formation of a blue colloidal suspension of Cu (II) copper salt. Anodic etching of copper in solutions containing 3% H₂O at potentials higher than 0.4 V leads to the formation of colloidal suspension of copper oxide nanoparticles.     

ESTIMATION OF VAPOR PRESSURES OF ORGANIC NITROGEN AND SULFUR COMPOUNDS BY A GROUP-CONTRIBUTION METHOD

The group-contribution method for vapor pressures of hydrocarbons and organic compounds containing nitrogen or sulfur, based on the kinetic theory of fluids, is revised and extended to include new groups containing nitrogen or sulfur. Good representation is obtained for vapor pressure data in the region 1.30-270 kPa. The method may be used to estimate vapor pressures and enthalpies of vaporization for those organic fluids containing nitrogen or sulfur, where no experimental data are available.     

有机磷化物制备羟基磷灰石工艺条件的探讨

探索用有机磷化物制备羟基磷灰石的工艺条件：采用硝酸钙、氨水、磷酸三丁酯为原料进行正交对比研究，优化得到了制备较佳羟基磷灰石的工艺条件。优化的工艺条件为：原料中Ca／P（molar ratio）1．67；Ca（NO3）2、4H2O／NH3H2O（g／g）为0.99；烧结温度为850℃：恒温时间为5h，并对合成的样品进行了化学和红外光谱的分析。     

不锈钢负载半导体薄膜光降解有机染料的研究

研究了以100 W直管高压汞灯为光源,以TiO2为催化剂,并将TiO2固定在不锈钢质反应器内壁,对有机染料活性艳红X-3B进行光降解的可行性.结果表明,在本实验条件下,本系统对该染料有明显的光降解作用.浓度为50 mg(A)l-1的染料溶液,经30 min光照,其降解率达95.8%.此外,还探讨了多种因素对光降解的影响.