Optical measurements of thermal diffusivity of a material

The measurement of thermal diffusivity of a material (in particular, a thin film) is important for various reasons, e.g., to predict the heat transfer in the solid subjected to a thermal process, to monitor surface composition or morphology, or to detect invisible subsurface defects like delaminations. This measurement can be done in a noncontact manner using various photothermal methods. Such methods typically involve pulsed heating of the surface by small amounts using a laser source; the decay of the surface temperature after this pulsed photothermal heating is then probed to provide the thermal diffusivity. Various probing methods have been developed in the literature, including the probing of reflection, refraction, and diffraction from the pulsed heated area, infrared thermal radiometry, and surface deformation. This paper provides an overview of such techniques and some examples of their applications.     

Experimental evaluation of the strength distribution of E-glass fibres at high strain rates

A bimodal Weibull distribution function was applied to analyse the strength distribution of glass fibre bundles under tensile impact. The simulation was performed using a one-dimensional damage constitutive model. The results show that there were two concurrent flaw populations in the fracture process. The regression analysis using the bimodal Weibull distribution function was in good agreement with experiment.     

石英晶体监控法镀制高精度光学薄膜

讨论了石英晶体监控法在光学薄膜镀制过程中的应用原理。通过与常规的光学监控法镀制的膜层相比较．证实了石英晶体监控法有助于提高光学薄膜的光学品质。试验表明所镀膜层的光学性能优异，在光通信和激光器等领域具有广阔的应用前景。     

Creep of aromatic polyamide fibres

Creep of Kevlar 29, Kevlar 49 and PRD 49-III fibres was investigated. The fibres exhibited transient creep and the strain-time relationship was represented by a logarithmic time law. The creep strain recovered with time when the load was removed. Upon reloading to the same creep stress the strain-time relationship was again logarithmic but the creep rate was reduced. Modulus measurements were made during the creep test and these showed that the modulus increased with time. This result indicated a crystallite rotation mechanism which could account for the experimentally observed creep strain. Creep in PRD 49-III fibres exhibited a small temperature dependence over the temperature range 20°C to 150°C. The apparent creep activation energy was consistent with the range of values reported for hydrogen bonding. This suggests one possible creep mechanism in which the combined action of stress and thermal activation causes rearrangement of intercrystalline bonds in the crystallite boundaries resulting in boundary creep. Boundary creep allows crystallite rotation which produces the macroscopic creep strain. Boundary creep is discussed in terms of the fibre morphology and a model of delayed elasticity.     

小型密闭压力容器测试系统重复性的研究

小型密闭压力容器测试（MCPVT）法是安全工程领域中近几年发展起来的、评价有机过氧化物及自反应物质受热分解反应激烈程度的新方法。pmax是MCPVT方法中用来表征自反应物质受热分解反应激烈程度的物理量之一。文中通过大量实验，研究了样品容器容积V、升温速率R及样品质量M对pmax重复性误差的影响，研究了一系列典型的有机过氧化物和自反应物质在标准实验条件下pmax重复性误差。结果表明，小型密闭压力容器测试系统重复性好，测试结果可靠，从而为MCPVT法最终成为国际上评价自反应物质受热分解反应激烈程度标准方法奠定了基础。     

光隔离器及其相关的磁光材料

本文简要介绍了磁光隔离器的理论、结构和分类 ,并提出了该器件今后发展的几个问题 ,最后介绍了几种磁光材料     

基于HOP的可调光编码／解码器的研究

提出了一种基于全息光处理器的可调光编码/解码器的实现方案。全息光处理器可以在空间进行编/解码，每个通信网络单元可以采用任意速率的数字或模拟的调制信号，它非常适合于多媒体的通信网络环境，通过对全息光处理器的折射率大小和位置的控制，当一个输入光脉冲经过光处理器中具有特定折射率的空间位置后，便可在处理器的输出端口得到合适的输出信号。本文给出了这种基于全息光处理器的可调光编码/解码器的仿真实验，结果是可行的，与以前文献中提出的结构相比，减小了硬件实现的复杂性，降低了成本和功耗，便于集成。     

只读式超分辨光盘的膜层设计和分析

超分辨技术是一种无需减小记录波长或增大数值孔径而提高存储密度的方法。Ge Sb Te是一种良好的相变光存储材料 ,在超分辨光盘中可作为掩膜。利用多层膜反射率的矩阵法计算了掩膜为Ge2 Sb2 Te5薄膜的超分辨只读式光盘的光学参数与各膜层厚度之间的关系 ,最后得到了较为理想的膜层厚度匹配。采用磁控溅射法制备了只读式超分辨光盘 ,测量了光盘的光学性质。     

矩形光脉冲光电响应后沿拖曳性状研究

本文对矩形光脉冲光电响应后沿拖曳的形成机制进行了详尽的实验研究和理论分析，认为形成该光电响应时滞后曳的主要根源在于光生电子与空穴的多声子慢态复合．我们给出了削减后沿拖曳、提高光电响应速度的有效措施，从而促进解决宽带光通讯的速度瓶颈问题．     

混合集成型光学拾音器的设计与制作

通过混合集成型结构光学拾音器的光学设计和芯片设计，制作了包含微光学棱镜，光电探测器和信号放大电路的混合集成型光学拾音器。经过测试，发现有较好的信号输出特性，表明混合集成型光学拾音器已基本研制成功。