新型高速电光调制器

介绍了目前高速长距离光纤通信中常用的电光调制器的原理、结构和应用．目前半导体调制器的研究日趋成熟，性能不断改善．有机聚合物电光调制器被公认为是最具潜力的高速光通信调制器，正成为人们关注的焦点．     

锂离子电池用聚合物电解质的最新进展I.干态聚合物电解质

聚合物锂离子电池的发展对聚合物电解质提出了更高的要求,促使人们开发性能优良的干态聚合物电解质。综述了近年来干态聚合物电解质的研究进展,包括:(1)以改性聚氧化乙烯-锂盐复合体系为代表的耦合体系;(2)导电机理完全不同的解耦合体系;(3)阴离子移动受限的单离子体系。其中,解耦合体系与单离子体系的研究得到了特别的关注。     

锂离子电池用聚合物电解质的最新进展II.含液聚合物电解质

由于干态聚合物电解质目前还不能满足聚合物锂离子电池的应用要求,人们致力于开发含液体增塑剂的聚合物电解质,包括凝胶型和微孔型两类体系。本文综述了含液聚合物电解质的最新进展,重点论述了各种新体系和新方法。     

退火对聚合物有机发光器件的影响

制作了结构为ITO／MEH—PPV／AI的单层聚合物有机发光器件(PLED),在镀铝电极前后分别对器件进行高于MEH—PPV玻璃化温度的退火处理。结果表明,镀铝电极后的退火处理可使器件的效率提高30％左右,器件的寿命增加40％左右;而镀铝电极前的退火处理对器件影响不大。     

含氟聚酰亚胺的热光性能

用5,5′-(六氟异丙基)-二-(2-氨基苯酚)(6FHP),4,4-′(六氟异丙基)-苯二酸酐(6FDA)和分散红19(DR19)合成了可制作光波导器件的含氟聚酰亚胺(PI-19)有机聚合物;采用示差扫描量热(DSC)、热失重分析(TGA)和近红外吸收光谱等方法对PI-19的热稳定性和光学性质进行了表征。示差扫描量热和热失重分析结果显示,PI-19的玻璃化转变温度(Tg)为256℃,在5%的热失重温度为380℃,表明具有非常好的热稳定性。近红外吸收光谱表明,材料在光通信波段(1.3μm和1.55μm)有2个较低吸收的“窗口”,可以用来制作低损耗的光通信器件、光开关等。制得的聚合物材料具有较大的热光系数,其值为-4.13×10-4~-3.72×10-4℃-1(650~1310 nm),对于研制具有低驱动功率的新型数字热光开关具有一定意义。     

Effect of the polymer matrices on the dielectric behavior of a percolative high-k polymer composite for embedded capacitor applications

High dielectric constant (high-k) polymer composites are of great interest for embedded capacitor applications. Previously, we demonstrated that epoxy—aluminum composites are promising for embedded capacitor applications, because they have a high dielectric constant and a low dielectric loss due to the core—shell structure of the self-passivated aluminum particles. In this work, to further understand the dielectric behavior of aluminum composites, lower-loss polymers such as silicone, polyimide, polynorbornene, and benzocyclobutene were explored as matrices for the aluminum composites. It is found that the polymer matrices can significantly change the dielectric properties of the aluminum composites. A polymer matrix with a lower dielectric constant generally results in a lower dielectric constant of its aluminum composites. In this regard, polymer—aluminum composites have a similar dielectric characteristic as polymer—ceramic composites. Thermomechanical properties of aluminum composites were characterized by a thermomechanical analyzer.     

聚合物电致发光器件中用类金刚石碳膜增强电子注入

用正丁胺作碳源,采用射频辉光等离子系统制备类金刚石碳膜(DLC),沉积在聚合物发光器件中的发光层(MEH-PPV)和铝(Al)阴极间作电子注入层.制备了结构为ITO/MEH-PPV/DLC/Al的不同DLC厚度的器件,测量了器件的I-V特性、亮度及效率,研究了DLC层对器件电子注入性能影响的机制.结果表明:当DLC厚度小于1.0nm时,其器件有较ITO/MEH-PPV/Al高的启动电压和低的发光效率;当DLC厚度在1.0～5.0nm之间时,器件的性能随着DLC厚度增加而变好;当DLC厚度为5.0nm时,器件具有最低的启动电压与最高的发光效率;当DLC厚度继续增加时,器件的性能随着DLC厚度增加而变差.并对ITO/MEH-PPV/DLC/Al和ITO/MEH-PPV/LiF/Al的器件性能进行了比较研究.     

主动成形准各向同性CFRP复合材料反射镜的铺层设计

要实现高精度的碳纤维增强聚合物(CFRP)复合材料反射镜的主动成形,使用面内刚度和弯曲刚度均为准各向同性的层合板非常重要。先建立对称层合板几何模型,根据经典层合板理论,得到准各向同性的要求下,正则化面内刚度系数、弯曲刚度系数以及正则化几何因子应满足的条件,确定单层组数最大的铺层方式,并提出以正则化刚度系数和几何因子表示的两种铺层顺序优化方法。然后,针对M40/环氧648材料,通过编程得到不同定向单层数量下的最佳铺层顺序。最后,用两种优化方法下的优化结果分别建立口径500 mm的壳体模型,经有限元静力学分析,得到模型上相同半径上各节点在光轴方向的变形量,并进行数据处理。结果表明:总层数为24层时,铺层顺序为[45/-15/-75/90/15/-45/-30/60/-60/0/30/75]s的层合板弯曲刚度的均匀性最佳。采用正则化刚度系数优化方法 Di*j=Ai*j,可得到准各向同性层合板铺层顺序的最优化方案;当总层数一定且单层组数最大时,增加定向单层数,将增加层合板弯曲刚度的均匀性。采用正则化刚度系数法对铺层顺序进行优化为准各向同性CFRP复合材料反射镜的铺层设计提供了一种方法。     

Morphology transformations of pentacene on an UV-patternable polymer insulator and their effect on performance of flexible organic thin-film transistors

This work presents a low temperature with high resolution capability UV-patternable polymer, i.e. mr-UVCur06, for use as a gate insulator in OTFTs, by investigating the morphology transformation of pentacene deposited on the mr-UVCur06. The device structure is polyethylene terephthalate (PET)/indium-tin oxide (ITO)/mr-UVCur06/pentacene/Au (source/drain). In addition to its solution-processable capability, mr-UVCur06 is directly patterned by UV light in a low-temperature process. UV/ozone post-treatment of the patternable mr-UVCur06 can illuminate organic contaminants from its surface and increases surface energy. Experimental results indicate that a high surface energy existing at the mr-UVCur06 surface has produced in a larger ratio of I_{thin film phase}/I_{triclinic bulk phase} in pentacene. Then, the distance of pentacene molecular crystal structure, which is arranged in the thin film phase, is shorter than that in triclinic bulk phase. The performance of pentacene-based OTFTs can be enhanced with few contaminants and a high surface energy on the UV-patternable gate insulator. By performing UV/ozone post-treatment on the mr-UVCur06 insulator surface for 60 s, the OTFTs demonstrate a mobility, on/off drain current ratio, and V_T of 0.34 cm²/V s, 5.5 × 10⁴, and 2.5 V, respectively. Furthermore, the low-temperature photopatternable polymer dielectric paves the way for a relatively easy and low-cost fabrication of an OTFT array without expensive and complicated photolithography and dry etching.     

掺Eu3+, Sm3+, Tb3+的TTFA配合物敏化发光效应的实验研究

为了研究稀土离子的α-噻吩甲酰三氟丙酮(α-thienyltrifluoroacetone,TTFA)配合物中敏化发光效应,对自行制备出的稀土离子Eu3+,Sm3+和Tb3+单掺TTFA配合物Eu(TTFA)3,Tb(TTFA)3,Sm(TTFA)3及3种稀土离子两两共掺的配合物的荧光光谱进行了分析,得出了稀土离子Eu3+,Sm3+,Tb3+与配体TTFA的敏化特性以及稀土离子Eu3+,Sm3+和Tb3+之间的敏化特性。Eu(TTFA)3,Tb(TTFA)3,Sm(TTFA)3及3种稀土离子共掺的配合物中,稀土离子Eu3+,Sm3+,Tb3+与配体TTFA及Eu3+,Sm3+,Tb3+之间有明显的敏化效应。结果表明,将其用于聚合物光纤放大器具有良好的发展前景。