极限电流型氧传感器的实验研究

本实验用8mol%Y_2O_3-ZrO_2固体电解质制成了极限电流型氧传感器,并测定了氧在0.23～28.70mol%,温度在550～800℃范围时,传感器的输出特性,观察到该传感器有较好的稳定性和电压电流特性曲线。实验验证了极限电流值与氧摩尔分数和温度的关系。     

OCO污水处理工艺在城市污水处理中的应用

介绍OCO工艺及其对城市污水处理的效果。普通城市污水经过该工艺处理之后 ,可以达到我国污水排放标准 ,还可以将所处理的污水经过三级处理之后 ,作为工业用水进行再利用。OCO工艺具有除氮除磷功能强、自动化程度高、运转方式灵活、占地少、出水水质稳定等特点 ,适用于高浓度工矿企业废水和城市生活污水的处理     

聚酰胺66的复配阻燃研究

采用35％磷-溴-锑复配阻燃体系对聚酰胺66进行阻燃，极限氧指数可提高到33．6％，达到UL94-V0级(1．6mm)，且无熔融滴落。阻燃体系的添加会导致聚酰胺66力学性能的下降，但与无机阻燃体系相比较，磷-溴-锑复配阻燃体系对聚酰胺66的力学性能影响较小。采用扫描电镜观察阻燃剂在聚酰胺66中的分散效果，发现分散均匀的体系，在水中或者在110℃的析出实验条件下，阻燃剂的析出量很小，可以维持较长时间的阻燃效果。     

几种血卟啉3,8—烷氧（硫）基衍生物产生单重态氧能力的研究

在“血卟啉衍生物”(HPD)肿瘤光动力疗法取得令人瞩目成就的同时,化学家们证明了临床使用的HPD制剂并非原意义上的血卟啉衍生物,而是一种复杂的卟啉混合物,其中血卟啉(HP),羟乙基-乙烯基-次卟啉(HVD),原卟啉(PP)约占总量的80％,Dougherty等分离得到其余20％未知结构羧基卟啉,认为此为HPD的有效成分,经进一步分析测定其主要成分是二血卟啉醚(DHE)。但最近的工作又表明,全合成得到的DHE与HPD有效成分的化学组成及生物活性亦不相同。显然这类药物组分复杂、结构的不确定限制了肿瘤光动力疗法的进一步发展。近年来,人们正试图从已知结构的化合物中探索新的光敏药物,作者在合成出一系列结构确定的单一组分血卟啉     

Electrodeposition of catalytically active nickel for the oxygen evolution reaction — effects of anionic composition

Nickel electrodes were prepared by electrodeposition in electrolytes of various anionic compositions. The deposition conditions and bath types were evaluated with special emphasis on the electrocatalytic properties for the oxygen evolution reaction (OER). Electrochemical characterizations in a 5 mol/L KOH solution at 25°C showed that the electrode deposited from the chloride bath, having a low Tafel slope of 50 mV/dec and an overpotential of 396 mV at 100 mA/cm², is the most catalytically active among electrodes prepared in electrolytes of various anionic compositions. The electrode activity for the OER is related to the real surface areas, which depend on the anion compositions in the deposition bath and the deposition conditions.     

从煤炭、天然气制取石油石化产品工艺技术

在阐述煤炭、天然气通过吹氧气化制取CO +H2 合成气联产石油石化产品的基础上 ,详细介绍了甲醇、二甲醚、乙烯生产工艺技术的应用与开发 ,对各种工艺路线进行了论证和技术经济评估     

变压吸附富氧工艺用于合成氨制气过程的技术经济分析

本文介绍了变压吸附法制备富氧空气用于合成氨造气系统的新工艺，并对５００００ｔ／ａ合成氨厂进行了技术经济评估。结果表明，同间歇法气化相比，该技术工艺先进且具有显著的经济效益。     

A_1-A_2-O-M工艺处理焦化废水的实验研究

采用厌氧-缺氧-好氧-复合(A1-A2-O-M)工艺处理焦化废水,考察了外加碳源和碱源对焦化废水COD和NH4+-N脱除效果的影响。试验结果表明:外加甲醇和碳酸氢钠对焦化废水的硝化和反硝化效果影响很小;不外加碳源和碱源时,焦化废水经处理后出水的COD和NH4+-N平均质量浓度分别为125.0mg/L和1.12mg/L,分别达到《污水综合排放标准》(GB8978-1996)中的二级标准和一级标准。     

Surface and subsurface products of the interaction of O2 with Ag under catalytic conditions

Polycrystalline Ag treated with O₂ at pressures up to 1 bar and at temperatures up to 920 K was examined by TDS. It was found that the peak commonly observed at 595±25 K and assigned to adsorbed atomic oxygen (O_a) is shifted to higher desorption temperatures with rising dosing temperatures. Since saturation of the uptake was not possible either, this peak was identified as dissolved atomic oxygen (O_d). The existence of a maximum for the O₂ uptake after exposure at 820 K was found. Hence, under conditions of formaldehyde synthesis ( 920 K) the ability of the catalyst to dissolve oxygen is near its maximum.